|
Nozzle, Pistol Type, 1½ Inch, With Storz Joint, Equipped With Selectable Flow, For Fighting Structural (Urban) Fires, Classified As Type 3, According To Items 3.1.3 Of Standard En 15182-2 Or 3.1, Section C, Of Standard Din 14367. The Nozzle Body Must Be Built In Anodized Or Composite Aluminum, And The Aluminum Must Be Extruded Or Forged; It Must Have A 1½-Inch Fire-Fighting Hose Coupling, Storz Connection, Type 52-C, Integrated Into The Nozzle Body And Made From The Same Material As The Nozzle Body; The Storz Connection, Or Its Connection Element, Must Allow The Joint To Rotate Infinitely, In Order To Prevent The Nozzle From Disconnecting And Not Twist The Fire Hose; The Nozzle Flow Must Be Selectable By Means Of A Manual Rotary Control Mounted Around The Nozzle Body, Located After The Jet Amplitude Selection; There Must Be At Least Three Possible Flow Selections, One Between 100 And 120 Lpm (Liters Per Minute), Another Between 200 And 240 Lpm And The Maximum Flow Being Between 400 And 500 Lpm. For All Flow Rates, A Pressure Of 100 Psi Must Be Considered In Operation. The Identification Of The Flow Rate In The Nozzle Must Be In Liters Per Minute (Lpm) Or In Gallons Per Minute (Gpm). There Must Be A Flush Position On The Flow Selector For Cleaning The Equipment. The Rotation Of The Nozzle Jet Amplitude Selection Head Must Be A Maximum Of 180º, As Follows: At One End The Selection For Solid, Compact Jet (This Position Is Considered 0º); At The Other End Of The Jet Amplitude Selection Head, Its Maximum Amplitude Is Completely Fogged (The Rotation To Reach This Point Must Be 180º). The Amplitude Change Must Occur As Soon As The Amplitude Selector Is Rotated. In The Totally Foggy Position, The Jet Opening Angle Cannot Be Less Than 100º. There Must Be 3 Jet Amplitude Selection Markings, Easily Identified..., Fire Hose With Simple Textile Reinforcement Made 100% In High Tenacity Polyester Yarn, Diagonal Weave (Twill Type), In White Color And Internal Synthetic Rubber Tube, In Black Color, In Diameters Of 40Mm (1.1/2) In Stretches Of 15 Meters, In Accordance With Type 2 Of Standard Nbr 11.861. Minimum Bursting Pressure Of 55 Kgf/Cm², Working Pressure Of 14 Kgf/Cm², Tied With Quick Coupling Type Unions, In Brass, Type 40-B (For 40Mm Diameter) From Nbr 14.439. Abnt Conformity Mark Certificate No. 40.0003/99 (1.1/2). Unit., In Diameters Of 65Mm (2.1/2) In Lengths Of 15 Meters, Type 65-B (For Diameter Of 65Mm) From Nbr 14.439. Abnt Conformity Mark Certificate No. 40.0004/99 (2.1/2). Unit., Storz Wrench For Fire Hose - Brass; Measuring 20Cm; For 1.1/2 And 2.1/2 Hose. Packaging Containing Product Identification Data, Manufacturing Date, Expiry Date And Manufacturers Brand. Unit., Storz Reduction 2½ X 1½, Made Of Cast Brass, For Reducing Fire Lines From 2½ To 1½. The Reduction Must Be Rotatable, Facilitating The Work By Preventing The Fire Hose From Twisting. Unit., 05/06/2026 - 12:51:48, 05/06/2026 - 12:52:14, 05/06/2026 - 12:52:20, Hydrant Registration Key - Made Of Special Steel Resistant To Torsional Effort; Measuring 1.2 Meters, Type T; Components Reduction Sleeve 30X30 To 20X20mm With Head Fitting. Packaging Containing Identification Data
|
