|
Bids Are invited for Operation And Maintenance Of Electrical Systems/Electrical Installations - Complete System - Sh I: Operation And Maintenance Works , Job Contract For Operation And Maintenance Of Ground Lighting Facilities (Glf) Installations, Standby Dg Sets And Associated Power Supply System At The Operational Area Of Hal Airport, On All Days Of The Month, Including Sundays And Holidays By Deploying Manpower On Round The Clock Basis For Carrying Out Preventive And Breakdown Maintenance, Attending Day To Day Complaints And Faults, And Taking Corrective Action To Ensure Serviceability & Satisfactory Working Condition Of All The Installations, Maintaining Of Records & Documentations Etc. Complete In All Respects As Per The Enclosed Inventory And Special Conditions Of Contract, And As Directed By The Engineer-In-Charge. Note : The Agency Shall Deploy The Minimum Manpower In Each Shift As Specified In The Special Conditions Of Contract. , Providing One Pickup Vehicle (Mahindra Bolero C Er / Isuzu S-Cab Or Equivalent) On Hire Basis For All Days Of The Month, To Be Operated In Two Shifts (16 Hours Per Day), With A Monthly Running Limit Of 1500 Km, Including Provision Of Two Drivers Per Day, Fuel, Maintenance, Insurance, And All Other Incidental Charges, For Transportation Of Manpower And Materials (Such As Cables, Fittings, Etc.) For Maintenance Of Glf Installations Within The Operational Area Of Hal Airport, Complete In All Respects As Per The Special Conditions Of Contract And As Directed By The Engineer-In-Charge. , Annual Comprehensive Maintenance Contract (Camc) Of 5.5 Tr Ductable Inverter Type Vrf Unit (Make: Bluestar, Model No.: Dsa661r1) Installed At Ccr Building, Hal Airport, Comprising Of Ductable Indoor And Outdoor Units, Associated Copper Piping, Insulation, Control Cabling, And All Electrical And Electronic Components Including Pre-Programmed Software For Proper Lan Functioning Of All Units And Pcbs, Along With All Accessories And Ancillaries Up To The Electrical Power Source, Through Oem/Oems Authorized Service Dealer, By Carrying Out Quarterly Service Visits For Routine/Preventive Maintenance And Attending All Breakdown/Maintenance Calls As And When Required. The Scope Also Include Supply And Replacement Of All Spare Parts And Consumables, Gas Charging, Overhauling, Cutting, Fixing And Brazing Works, Repair/Replacement Of Compressor, Remote Controls, Pcb Boards, Condenser And Evaporator Coils, Insulation, Blower, And All Other Minor Repair Works, Including Transportation, Loading/Unloading, Painting, Etc., To Ensure 100% Serviceability And Satisfactory Working Condition, Including Submission Of Service Reports And Maintenance Records, Complete In All Respects As Per The Special Conditions Of Contract, And As Directed By The Engineer-In-Charge.Note: (1) The Date Of Commencement Of Item Shall Be As Per The Instruction Of Aai. (2) The Successful Tenderer Shall Place Purchase Order/Make Contract With Oem/Oem Authorized Service Dealer And Copy Of The Same Should Be Submitted To The Engineer-In-Charge Before Execution Of Item. , Carrying Out Photometric & Chromaticity Testing Of Agl Fixtures Such As Inset/Elevated Type Runway Edge, Elevated Type Approach, Elevated Type Threshold, Elevated Runway End, Papi, Guidance Signages Etc By Making In-Field Measurement Of Intensity, Beam Spread And Orientation (4Cs I.E.- Configuration, Colour, Candelas And Coverage), Chromaticity And Luminous Factor, Including One Time Field Alignment Setting Of Agl Fixtures. The Work Shall Also Include Replacement Of Burnt Out L , Lenses, Filters And Carrying Out Any Corrective Action As Required (Spares To Be Provided By Aai), Using Vehicle Mounted Mobile Testing Equipment System And Testing Of Individual Fitting By Frame Reader, Submission Of Test Reports Etc As Per Requirement Of Icao/Civil Aviation Requirement (Car) Section 4 - Aerodrome Standard & Licensing Series ‘B Part-I Etc. Complete. Note : One Job Includes Carrying Out Photometric & Chromaticity Testing For A Period Upto Two Consecutive Nights. , Supplying And Retrofitting Of 160A, 36Ka, Thermal Magnetic-Based, Four-Pole Mccb In The Existing Lt Panel, Including Dismantling Of Existing Switchgears, Modification/Replacement Of Existing Aluminium Auxiliary Busbar To Suit The Capacity Of Switchgears (If Required), Installation At The Required Location, Supply And Fixing Of Accessories Such As Rotary Handle And Spreader Terminals, Etc., Interconnection With Busbars, Testing Of Satisfactory Operation, Etc., Complete As Per The Direction Of The Engineer-In-Charge, As Required. , Supplying And Fixing 3P+N ; Type 1+2 Surge Protection Device (Spd) For Three Phase Ac System 440 V ; 50 Hz, I/C Removable Cartridges ,Tt And Tn-S System With Neutral With Imax : 80/100 Ka In The Existing Lt Panel/Mcb Db Complete With Dinbar For Mounting, Connections, Testing And Commissioning Etc. As Required. , Calibration Of Clinometer Of Ama Make Papi Units Through Oem M/S Ama India Pvt. Ltd. Or Any Nabl Accredited / Government Authorized Laboratory, Including Packing, Transportation, Freight (To And Fro), Handling, Insurance If Required, And Safe Return To Hal Airport, Along With Submission Of Valid Calibration Certificate, Complete As Required. , Execution Of Items Based On Cpwd Dsr (E&M)-2022, As And When Required, For Attending Breakdowns, Repair, Maintenance And Upkeep Of Glf Installations, As Per Special Conditions Of Contract And As Directed By The Engineer-In-Charge. The Bidder Shall Quote Percentage (%) Above / Below The Dsr (E&M) 2022 Rates I.E. (For Eg :- If The Bidder Desires To Quote 5% Above Dsr (E&M)- 2022 Rates, The Rate Column Shall Be Filled As 105% And For 5% Below, The Rate Column Shall Be Filled As 95%). The Rate Payable Shall Be Excluding Gst I.E, Item Rate Will Be Derived Based On The Percentage (%) Above / Below Quoted By The Bidder Over Dsr (E&M)-2022 Rates After Deducting Gst Component. , Sh Ii : Supply Of Glf Spares , Supply Of Following Elevated Type, Unidirectional High Intensity Runway Light Fitting Suitable For Use With 200W, 6.6A, Bi-Pin Halogen L Complete With All Accessories Including L , Cl Ing Mechanism, Pre-Focus Bi- Pin L Holder, Central Column Assembly, Breakable Coupling, Two Pin Secondary Lead Plugs With Suitable Green/Red/Clear Spreader Lens And Ci Base Plate Etc Conforming To Icao Standards Etc. Complete As Required. (Make: Ama Apn Or Its Equivalent) , Supply Of Following Filters Suitable For Existing Elevated High Intensity Runway Edge Fittings Of Ama Make, Confirming To Relevant Icao Standards Complete As Required. , Supply Of Following Spreader Lens Suitable For Existing Unidirectional Elevated Type High Intensity Light Fittings Of Ama Make, Confirming To Relevant Icao Standards Complete As Required. , Supply Of Following Spares Suitable For Existing Papi Unit Light Fittings Of Ama Make (Mk-Iii), Confirming To Relevant Icao Standards Complete As Required. , Supply Of Reflectors Suitable For Existing Unidirectional Elevated Type High Intensity Light Fittings Of Ama Make. , Supply Of 200 Watts, 6.6 S, Bi-Pin Halogen L Suitable For Existing High Intensity Runway Edge/Threshold/Approach Light Fittings Of Ama Make (Make/Model : Osram 64386 Or Its Equivalent From List Of Preferred Makes) , Supply Of 45Watt, 6.6 S, Bi-Pin Halogen L Or Existing Medium Intensity Taxiway Edge/ Turn Pad Light Fittings Of Ama Make (Make/Model : Osram 64321 Or Its Equivalent From List Of Preferred Makes) , Supply Of Bi-Pin Halogen L Holder Suitable For Existing High/Medium Intensity Agl Fittings Of Ama Make. , Supply Of Following Capacity 5Kv Grade, 50 Hz, Isolating Transformer, Series Type, Encapsulated In Polyster Resin Finally Moulded In Neoprene Type Rubber With Primary & Secondary Connections As Specified Conforming To Is : 12290 With Upto Date Amendments Etc Complete As Required. , Supply Of Following Sizes Of Dry Type Plug And Receptacle Of Class B Primary Connector Kit For Field Attachment And Suitable For 5 Kv Grade Single Core Copper Conductor Afl Cable Etc Conforming To The Relevant Is Specification Etc. Complete As Required. , Supply Of Converters Suitable For Existing Runway/Taxiway Guidance Signage Boards Of Nasu Make Suitable For Operation With An Input Current Range Of 2.8A To 6.6A From The Ccr (Make/Model :Nasu Led/6.6/800V35 Or Its Equivalent) , Supply Of Led Light Strip Suitable For Existing Runway/Taxiway Signboard Of Nasu Make With Luminous Life Of Atleast 50000 Hours, 0.5Watts Leds Assembled On Aluminium Pcb Of Size 700Mm X 20Mm And Having 11 Leds Per Pcb. The Thickness Of Pcb Shall Be 2Mm To Ensure Proper Heat Dissipation. (Make/Model :Nasu 700V35 Or Its Equivalent). , Supply Of Self-Bonding Electrical Insulation Tape Of Minimum 19Mm Width X 9 Meter Length Made Of Rubber/Equivalent Material, Suitable For Sealing And Ingress Protection Of Cable Joints, Terminations And Connectors For Afl Cables Of 5 Kv Grade, Complete As Required. (Make/Model : 3M Scotch-23 Or Its Equivalent)
|
