|
Sys-Link Cable 2.5 M Long For Digital Training Studio. Used To Connect Edutrainer Or I/O-Terminal To An Additional I/O-Terminal Or Simulation Block. Code: D: Mp-B-An-Keat, Recognition Module. Installed On The Mps Station Guide Near The Conveyor Or Tray Module; With Simple Reconfiguration, It Can Also Be Mounted On A Profile Plate. Identifies Various Workpieces By A Combination Of Sensor Signals (Red, Black, Metal, Transparent). Ready For Use, Equipped With Three Different Sensors And An Electrical Interface. Suitable For Parts With A Diameter Of Up To 40 Mm. Technical Data: Power Supply 24 V Dc; Square/Round Workpiece Size - Up To 40 Mm; 3 Digital Sensors. Scope Of Delivery: Sensor Holder With Mini I/O Terminal, Diffuse Sensor Pnp No, Fork Photoelectric Barrier Pnp No, Inductive Sensor With A Range Of 2-8 Mm (Adjustable) Pnp No, Fasteners., Mp4-Bg-Ang Series Analog I/O Module, Digital I/O-Terminal (Syslink) Is The Central Node Of The Mps Syslink Concept. Used To Connect Eight Digital Inputs And Eight Digital Outputs Combined Into One Connector. The Contacts Are Made On Spring Terminals; Led Indicators Are Installed On The Input And Output Terminals To Monitor The Switching Status And Diagnostics. H-Rail Mounting. Technical Data: Terminals 24 V/0 V; Inputs - 8; Exits - 8; Spring Terminals 0.2-1.5 Mm2; Ieee 24-Pin Connector (Syslink); Led Indication; Dimensions 68X77 Mm. Delivery Set: Terminal With H-Rail Mounting. Code: D:Mp4-Bg-Sysl, Parallel Analog Cable With 15-Pin Sub-D Connectors On Both Ends, Length 150 Cm. Designed To Connect Easyport/Plc To A Real Process Or Simulation Unit. Code: D:As-Kb-Analog, Connecting Cable. 15-Pin D-Sub: Male - Open End. Designed To Connect Mps Modules To Interface C Via Mini I/O-Terminal. The Cable Carries 24 V/0 V In Parallel, Four Digital Inputs, Four Digital Outputs, Two Analog Inputs And One Analog Output. Technical Data: 16 Cores Of 0.25 Mm2; 15 Pin D-Sub Hd Connector; Length 2.0 M. Code: D:Mp4-Et-Lg-St-2.0M, Universal 2-Axis Pick And Place Module. The Position Of The Limit Switches, Mounting Position And Height Are Adjustable. The Module Is Equipped With A Vacuum Generator, Pressure Switch, Vacuum Filter, Vacuum Gripper, Valve Terminal, Pressure Limiter And Electrical Interface. Technical Data: Operating Pressure 600 Kpa (6 Bar); Power Supply 24 V Dc; 4 Digital Sensors; 4 Digital Actuators; X Axis Travel - 80 Mm; Z Axis Travel - 50 Mm; Height-Adjustable P And P - Head; Pressure Limitation Along The Z Axis. Scope Of Delivery: Mini I/O Terminal; Valve Terminal With 2 X 5/2-Way Monostable Valves And 1 X 5/2-Way Bistable Valve; 2 Double-Sided Cylinders With Guides; 3 Magnetic Limit Switches; Fasteners For Profile Plate; Vacuum Sensors, Venturi Nozzle, Soft And Hard Suction Cups. Educational Content: Basics Of Pneumatics, Magnetic Limit Switches, Connecting Tubes And Electrical Wiring, Reading Diagrams, Familiarization With Handling Systems, Vacuum And Gripping Technology. Execution With Vacuum Technology. Code: D:Mp-M-Pp-Vgr-Kpl, Rotating And Lifting Module For Installation Against The Belt Or On The Mps Transfer Belt. Used To Remove A Workpiece From A Conveyor, For Example Onto A Measuring Table, And To Measure The Height Of The Workpiece And Then Return It To The Belt. It Is A 2-Axis Manipulator For Small Lifting And Turning Operations With Parallel Gripping. Designed For Parts With A Diameter Of 40 Mm. The Grip Position And Rotation Angle Are Adjustable. Supplied Fully Assembled With Valve Sections, Sensors And Electrical Interface. Technical Data: Operating Pressure 600 Kpa (6 Bar), Power Supply 24 V Dc, 4 Digital Sensors, 3 Digital Actuators, C-Axis Rotation Angle - 0-180 Degrees, Z-Axis Travel - 20 Mm, Radius 100 Mm, Rotation/Lift Unit Height Adjustable. Scope Of Delivery: Mini I/O Terminal; Valve Sections 3 X 5/2-Way Monostable Valve; Double-Sided Cylinder With Guide; 4 Magnetic Limit Switches; Parallel Grip With Jaws; Fasteners For Profile Pipes. Training Content: Fundamentals Of Pneumatics, Magnetic Limit Switches, Connecting Tubing And Wiring, Reading Diagrams, Familiarization With Handling Systems, Semi-Rotary Drive, Gripping Technology. Code D:Mp4-M-Dh-Kpl.
|
