Bids Are Invited For Acquisition Of School Furniture, Intended To Service Teaching Units Of The Municipal Ed ... in Brazil

Work Detail

Steel File For Suspended Folderssliding Steel File With Four Drawers Mounted On Telescopic Rails That Allow Full Opening. Depth: 710 Mm +/- 10 Mm;· Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. CharacteristicsⷠBody And Internal Structure In Steel Plate 22 (Thickness 0.75Mm) In Gray Color;· Drawers In Plate 24 (0, 60Mm);· Telescopic Rails And Zinc Plated Guides In Plate 18 (1, 20Mm) Or Higher;· Drawer Locking Rod In Plate 16 (1, 50Mm);· Lower Closing (Along The Floor) In Plate 24 (0, 60Mm).· Zamac Handles In Steel Finish 96Mm.· Cylindrical Drum Lock (Minimum 4 Pins) With Simultaneous Locking System Of The Drawers.· Keys In Duplicate. Compressors For Folders In All Drawers.· Printed Or Overlaid Label Holders, The Last Being Exclusively Made Of Non-Ferrous Metallic Alloy, Chromed Or Nickel-Plated.· Drawers Equipped Of Telescopic Rails Composed Of Linear Guides With Steel Ball Bearings, With A Minimum Vertical Load Capacity Of 45Kg And Anti-Escape Mechanism.· Leveling Shoes In Chromed Metal With Injected Polypropylene Base.· Painting In Epoxy/Polyester Hybrid Powder Paint, Electrostatic, Glossy, Oven Polymerized, Thick Minimum 40 Micrometers In Gray Color.GuaranteeⷠMinimum Of Three Years From The Date Of Delivery, Against Manufacturing Defects And Oxidation., Steel Cabinet With 2 Doors And 3 Shelvescabinet Made Of 0.45 Mm Thick Carbon Steel Sheet (Sheet 22), With 2 Doors And 3 Fixed Shelves. Minimum Cabinet Dimensions: 1870 Mm Height X 900 Mm Width X 400 Mm Depth. Electrostatic Epoxy Painting, With Anti-Rust Treatment Standard Gray Color. Load Capacity Of 40 Kg Per Shelf. Door With Drum Type Lock, And Handle Made Of Metal And Feet With Rubber Shoe. Minimum 6 Month Warranty. Deliver Assembled, Steel Cabinet With 2 Large Doors And 4 Shelves Tall Steel Cabinet, Divided Vertically Into Two Compartments By Dividers With Independent Doors, Equipped With Four Removable And Adjustable Shelves In Each Compartment. +/- 10 Mm;· Depth: 400 Mm +/- 10 Mm;· Height: 1980 Mm +/- 10 Mm;· Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. Plate 22 (0.75 Mm).· Shelves And Door Reinforcement In Cold-Rolled Steel Sheet - Plate 20 (0.90 Mm).· Base In Cold-Rolled Steel Plate - Plate 18 (1.25 Mm).· Door Locking Bars Ø = 1/4€ (Minimum).Internal Hinges Not Visible On The Outside Of The Furniture In Cold Laminated Sheet Metal - Plate 14 (1.9 Mm) With A Minimum Of 75 Mm In Height - Three Units Per Door.· Fully Metal Handle And Canopy, With Cremona System Locking.· Cylindrical Drum Lock Built Into The Handle With A Minimum 4-Pin.· Duplicate Keys Attached To The Corresponding Knobs.· Printed Or Overlapping Label Holders, The Latter Being Exclusively Made Of Chromed Non-Ferrous Metal Alloy.· Painting In Epoxy/Polyester Hybrid Powder Paint, Glossy Electrostatic, Polymerized In An Oven, Against Manufacturing Defects And Oxidation. En

Contact Information