Bids Are Invited For Price Registration For The Acquisition Of Furniture, In Compliance With The Needs Of Th ... in Brazil

Work Detail

Tall Wardrobe – Description: Tall Wardrobe With 2 Doors, With Key. Dimensions: Height: 1610Mm (+/-3Mm); Width: 904Mm (+/-3Mm); Depth: 506Mm (+/-3Mm) - Product Must Be Manufactured Using Fsc Controlled Wood: Tall Cabinet With Two Doors Made Of Pressed Mdp Wood (Medium Density Particle Board) With Both Sides In Bp (Low Pressure Melamine Laminate) With Tactile Texture With 3D Effect And Antibacterial Protection, With A Matte Or Semi-Matte Finish Guaranteeing Let There Be No Reflection; Edges In Flat Thermoplastic Profile, In The Same Pattern As The Coating; Body: Consisting Of A Top And Base 25Mm Thick, With A 2.0Mm Thick Edge. Sides, Bottom Shelves And Doors With 18Mm Thickness And 1Mm Thick Edge Finishing. Locking The Assembly With The Minifix Mounting System, With Zamak Bushings Embedded In The Substrate And Bolts. Doors: Two Opening Doors, With Zamak Hinges, Opening 270°. Cremona Type Lock With Rod For Locking The Doors, Accompanying 2 Retractable Keys. Handles Built In Anodized Aluminum And Finished With Polypropylene Tip With Dimensions 174Mm X 44Mm X 15Mm (L X H Plinth: 20Mm X 30Mm Rectangular Tubular Carbon Steel Plinth. To Control The Unevenness Of The Floor, It Has 4 (Four) Leveling Shoes Made Of Nylon Injected Into The Surface In Contact With The Floor, And Finished In Chromed Or Zinc-Plated Stamped Steel Sheet. The Edge Strips Must Be Fixed To The Substrate Of The Wooden Panels Using Thermo-Fusible Adhesive Based On Ethylene Vinyl Acetate, Applied Exclusively Using The “Hot Melting” Gluing Process, And Must Receive A Milled Finish After Gluing, Configuring Rounded Edges With A Radius Of 2.0 Mm For Edges Of 2.0 Mm And 1. 00Mm For 1.0Mm Edges. Welds Must Have A Smooth And Homogeneous Surface And Must Not Have Sharp Points, Rough Surfaces Or Slag. All ..., Steel Wardrobe Cupboard - Description: - Wardrobe Cupboard 8 Doors With Padlock; Double Wardrobe With Eight Doors, Made Of Low Carbon Steel Sheet, Finished By The Sheet Chemical Treatment System (Anti-Rust And Phosphating) And Painting Using An Electrostatic Powder System, With A Minimum Layer Of Paint Of 70 Microns; Two Sides And A Central Vertical Divider In No. 24 Steel Sheet (0.60 Mm); One Bottom And Two Half Tops (Top And Bottom) Made Of N°24 Steel Sheet (0.60 Mm), Internal Reinforcement (Square), Made Of N°18 Steel Sheet (1.2 Mm), Fixing The Sides; A Frontal Finish Composed Of Two Closures, One Upper And One Lower, In Plate N° 24 (0.60 Mm) Welded To A Finish Of The Central Divider In Plate N° 20 (0.9 Mm). Base Made From No. 18 Steel Sheet (1.2 Mm); Four Adjustable Feet (Shoes) To Correct Small Differences; Eight Compartments With Door, With Two Internal Hinges; Entrance Area Of ​​Each Door Of At Least 39.5 Cm X 24 Cm, And Internal Area 41 Cm X 30 Cm X 42.5 Cm; Assembly Using Rivets., Steel Cabinet - Description: Steel Cabinet With Two Doors - Dimensions: H=1980Mm, W=1150Mm, P=450Mm – With Key. Extra Tall Steel Cabinet With Two Opening Doors And Four Shelves. Features: Sides, Bottom, Doors, Shelves And Top And Bottom Tops In No. 24 Steel Sheet (0.6Mm); Internal Reinforcement (Equa

Contact Information