|
Lot 03 - Childrens Collective Set Consisting Of A Square Table And Four Chairs. The Table Has A Top In 18 Mm Mdf, Approximately 800 × 800 Mm, With Rounded Corners, Rounded Edges And A Formica Covering. Structure In 1010/1020 Steel, 40 × 40 × 1.20 Mm Tube, Mig Welded, With Anti-Corrosion Treatment Using Iron Phosphate, Hybrid Electrostatic Painting And Polypropylene Shoes. Approximate Height Of 590 Mm. The Chairs Have An Anatomical Seat And Back In 10 Mm Multi-Laminated Plywood, Covered In Formica, Fixed By Rivets, With A 7/8 Steel Tube Structure, Reinforcement Beam, Mig Welding, Electrostatic Painting And Polypropylene Tips. Approximate Dimensions: Seat 300 × 300 Mm, Back 300 × 165 Mm And Seat Height 35 Cm. The Company Must Present Corrosion Reports (Saline Mist 1500H; Nbr 8095 – 500H; Nbr 8096 – 10 Cycles), Ergonomic Report Nr 17, Paint Adhesion Test Nbr 11003 (Gr0), In Addition Original Product Catalog., Lot 01 - Chair With Arm Made Of Polypropylene Resin In White Color, With Stiffener, Anti-Dust, Anti-U.V.04, Resistant To Ultraviolet Rays From The Sun, Feet With Non-Slip Shoe, Measuring 800X360x420x420mm., Lot 05 - Cabinet Made Of Sae Steel Sheet 1008–1012, Plate No. 22, With Dimensions Of 1980 X 900 X 450 Mm, Crystal Gray Color And Textured Finish. Doors In The Upper, Central And Lower Regions, Accompanied By Two Keys. Internally, The Cabinet Contains Four Reinforced Shelves, With Front, Rear And Side Folds, Adjustable Through High-Relief Printed Racks, With An Adjustment Pitch Of 50 Mm, Allowing The Shelves To Be Securely Locked. Welded And Equipped With A Rivet Nut For Installing The Leveling Feet. The Feet Are Hexagonal, With A Black Polymer Base And A 3/8” X 21.5 Mm Zinc-Plated Steel Thread; The Rivet Nut Is Cylindrical, Made Of Zinc Plated Carbon Steel. - According To Nr 24, Each Door Has Two Ventilation Sets With 6 Columns And 24 Rows Of 6 Mm Holes, Spaced Every 12 Mm, Positioned 99 Mm From The Horizontal Edge And 71 Mm From The Vertical Edge, Totaling 81 Cm² Of Ventilation Per Door. Includes Bas-Relief Printed Label Holder, Measuring Approximately 80 X 37 Mm. The Cabinet Receives Anti-Rust Treatment Via Spray Tunnel With Degreasing, Hot Iron Phosphate Phosphating, Rinsing And Inorganic Passivator. The Painting Is Applied In A Continuous Corona-Type Line, With Hybrid Epoxy-Polyester Powder Paint, Minimum Layer Of 60 Microns, Polymerized In An Oven At A Minimum Of 200 ºc For 10 Minutes. The Cabinet Must Meet Nr-17. The Company Must Present: Abnt Certificate; Salt Mist Reports (Min. 500 H – Nbr 8094:1983), Resistance To Humid Atmosphere (Min. 500 H – Nbr 8095:2015), Pencil Hardness (Min. 6H – Astm D3359:2009), Adhesion (Min. 5B – Astm D3363:2005), Resistance To Sulfur Dioxide (Min. 10 Cycles – Nbr 8096:1983), Report D, Lot 02 - Fixed Executive Approximation Chair, With Backrest In An Injected Polypropylene Copolymer Structure With Ribs And Anchoring Channel, Anatomical Shape For Adequate Dorsal And Lumbar Support, Foam Injected In Microcellular Polyurethane (45–50 Kg/M³; 40 Mm) And Coated
|
