|
(L1) 6510.24697-Syringe, 10Ml Luer Slip Disposable Syringe, Without Needle, Made Of Polypropylene Or Other Plastic, Non-Toxic, Non-Pyrogenic, Intact, Suitable And Transparent That Allows Clear Visualization Of The Aspirated Fluid. Straight Cylindrical Body, With Perfect Internal Finish, Uniform Wall In Its Thickness. It Must Allow The Free And Smooth Movement Of The Plunger, With A Retaining Ring At The Distal End That Prevents The Plunger From Detaching From The Cylinder. Flange In A Suitable Format To Support The Fingers And Provide Stability To The Syringe When Placed On A Flat Surface. Marking: The Graduation Scale Must Be Applied To The External Surface Of The Cylinder Body, With A High Degree Of Accuracy, Traces And Inscription Number Clear, Legible Without Flaws, Remaining Clear Until The Moment Of Use. The Traces Must Have A Uniform Thickness To Be Free From Irregularities Between The Spacings. The Graduation Scale Must Be Facing Up, Easy To View, When The Cylinder Body Is In The Use Position. Siliconized Rubber Plunger Suitable For Better Slider Gliding, Molded To Facilitate Aspiration And Injection Of Fluids. It Must Have A Stopper At The Proximal End, Suitably Adjustable To The Body, Preventing Leaks, And Firmly Fixed To Avoid Displacement During Aspiration. The Plunger Stopper Must Be Made Of Latex-Free, Inert Material, Free From Defects, Burrs, And Must Ensure Smooth Sliding Throughout. During Aspiration And/Or Injection It Cannot Be Separated From The Rod. Dimensions: The Syringes Specified Here Must Be Sized In Accordance With Universally Adopted Standards, And The Assembled Set Must Have The Distal End Of The Plunger Protruding In Relation To The Corresponding Body By Approximately 1 (One) Cm, The Difference Of Which Is Intended To Provide Adequate Handling Conditions, Packaging: Individually Packaged In An Appropriate Packaging That Complies With With The Sterilization Process Uses, (L2) 6510.24697-Syringe, (L3) 6510.24702-20Ml Disposable Luer Slip Syringe, Without Needle; Made Of Polypropylene Or Other Plastic, When The Cylinder Body Is In The Position Of Use. Similar Brands Descriptive Complement: Appropriate Siliconized Rubber Plunger For Better Glide Of The Slider, Packaging: Must Be Individually Packed In An Appropriate Wrapper That Is A, (L4) 6510.24702-Disposable Syringe 20Ml Luer Slip, (L5) 6510.5565-Syringe, Disposable, 10 Cc Without Luer Lock Needle, Molded To Facilitate Aspiration And Injection Of Fluids. Present At The Proximal End, A Stopper, Firmly Fixed In Order To Avoid Displacement During Aspiration. The Plunger Stopper Must Be Made Of Latex-Free Material, Ensuring Smooth Gliding Throughout. During Aspiration And/Or Injection It Cannot Be Separated From The Rod. Dimensions: The Syringes Specified Here Must Be Sized In Compliance With Universally Adopted Standards, Packaging: Individually In An Appropriate Wrap That Is In Accordance With The Sterilization Process Used. Must Ensure Integrity, 04/30/2026 - 12:00:09, (L6) 6510.5565-Syringe, (L7) 6510.64725-Peripheral Insertion Central Type Catheter (Picc), Material: Made Of Polyurethane Or Silicone For Atraumatic Peripheral Insertion, Well Finished Smooth, No Burr, Kink Resistant, Cylindrical, Flexible, Sterile, 1.0 F Gauge
|
