|
Children/Youth Eighth Set: Suitable For Children 2 To 6 Years Old - Sc 001 -Chair: - Material: 10 Mm Thick Anatomical Multilaminated Plywood. Coated In Formica. -Color: Yellow, Royal Blue, White, Red, Aqua Green. - Fastening: Aluminum Rivets. - Structure: - Material: Round Steel Tube, Diameter 19.05 Mm (3/4). - Anti-Rust And Corrosion Treatment: Yes. -Painting: Epoxy-Powder. - Color: White. - Tips: Internal In Injected Polypropylene. - Dimensions: - Seat: 305 - Color: White. - Rounded Corners: Yes - Edges: In 2 Mm Pp, Anti-Yellowing, Glued Using The Holt Melting System, In White. - Structure: - Material: Round Steel Tube, Diameter 31.75 Mm (1 1/4), Toothpick Model - Anti-Rust And Corrosion Treatment: Yes - Epoxy-Powder Painting - Color: White. - Tips: Internal Injected Polypropylene - Dimensions: - Diameter: 770 Mm - Height: 570 Mmsc 010 Trapezoidal Octave Table: - Material: 15 Mm Mdf, Formica Coated. - Color: Yellow, Red Or Aqua Green. - Rounded Corners: Yes - Edges: 2 Mm Pp, In White - Structure: - Material: Round Steel Tube, 05 Mm (3/4) - Grating: Yes - Anti-Rust And Corrosion Treatment: Yes - Epoxy-Powder Painting - Color: White. - Tips: Internal Injected Polypropylene - Dimensions: - Larger Base: 560 Mm - Smaller Base: 360 Mm - Depth: 340 Mm. -Height To Railing: 440 Mm - Total Height: 570 Mmtotal Diameter With Children: 2000 Mm., Plastic University Desk: With Book Holder Ideal For Schools, Convention Rooms, Auditoriums, Churches, Commercial Establishments And General Use. Backrest Made Of Polypropylene (Pp), Using Thermoplastic Injection System. It Is Fixed To The Structure Using Fittings, With Locking To The Structure Using A Buffer Pin, Also Made Of Polypropylene (Pp) In The Same Color As The Backrest. Seat Made Of Polypropylene (Pp), Using Thermoplastic Injection System. With Locking Made By Screws. Backrest And Seat Finishes: Polypropylene (Pp) Finish. Plastic University Desk Plastic University Chair With Book Holder Ideal For Schools, Using Thermoplastic Injection System. With Locking Made By Screws. Backrest And Seat Finishes: Polypropylene (Pp) Finish. Structure: Back Supports: In 2 Carbon Steel Tubes, Oblong Shape, Section 16X30mm. Seat Supports: In 2 Carbon Steel Tubes, Round Shape, Feet: In 2 Carbon Steel Tubes, Section 16 X 30 Mm. The Backrest And Seat Supports Are Curved Using Specific Machines And Joined Together Using A Welding System. Tube Closing Tips: Made From Polypropylene And Fitted Into The Structure, Including Sliding Finishes For The Feet. The Entire Metallic Structure Is Subjected To An Anti-Rust Pre-Treatment Of Degreasing, Stabilization, Phosphorization, Powder Painting Using The Electrostatic Deposition Process And Drying In An Oven At 250º C. Measurements: Load Capacity: 110Kg; Seat/Back Finish: Polypropylene; Total Height: 84Cm 3Cm; Total Depth: 53Cm 3Cm; Total Width: 5, Work Tablework Table With Rectangular Top In Mdf Covered In Melamine Laminate, Mounted On Metal Support With Two Feet. Dimensions: Rectangular Top: 1200 X 600 Mm +/- 10 Mm; Height: 750 Mm +/- 5 Mm; To
|
