|
Rectangular Meeting Table With Electrifiable Raildimensions: 2400 X 1100 On The Edges With 28 Mm Thick Mdp, And Its Interior Filled With Cardboard Honeycomb. The Edge That Follows The Entire Contour Of The Top Is Topped With Polystyrene Tape With A Minimum Thickness Of 2.5 Mm, Rounded Edges With An Ergonomic Radius Of 2, Glued With Hot Melt Adhesive. The Top Is Equipped With Electrical Boxes Made Of Aluminum, With A 90º Opening Lid And A Built-In Socket Holder, With 08 Rectangular Holes For Installing Electrical Sockets (New Abnt Standard), 04 Square Holes For Installing Receivers For Rj45 Plugs, And Openings For Passing Cabling. Fixing The Top/Structure Must Be Done Using Metal Plugs. Structural And Privacy Front Panels, In 18 Mm Thick Mdp, Coated On Both Sides With Thermo-Pressed Melamine Film 0.2 Mm Thick, Textured, Semi-Matte And Anti-Reflective. The Exposed Edges Of The Pieces Are Covered With Polystyrene Tape With A Minimum Thickness Of 2 Mm, Rounded Edges With An Ergonomic Radius Of 2 Mm, Glued With Hot Melt Adhesive. The Panel Is Sectioned Into Two Parts To Fix A Central Tube Measuring 50 The Panel/Top Fixing Must Be Done Using Hidden Minifix Type Screws. Panel Foot Made Of 54 Mm Thick Mdf, 6 Mm Thick, Plywood And Battens On The Edges With 42 Mm Thick Mdp, Edges..., Armario Credenza 4 Doorsarmario Credenza 4 Doorsdimensions: 1600 X 500 Top Top Made With 25 Mm Thick Sheet Metal, Covered On Both Sides With 0-Thick, Semi-Matte, Anti-Reflective Thermo-Pressed Melamine Film. The Edge That Follows The Entire Contour Of The Top Is Topped With Polystyrene Tape With A Minimum Thickness Of 2.5 Mm, Glued With Hot Melt Adhesive, With Rounded Edges And An Ergonomic Radius Of 2.5 Mm In Accordance With Abnt Standards. The One-Piece Lower Top Is Made With 18 Mm Thick Sheet Metal, 5 Mm Doors Made Of Mdp, 18 Mm Thick, Coated On Both Sides With 0, Semi-Matte And Anti-Reflective Thermo-Pressed Melamine Film. The Edge That Follows The Entire Contour Of The Door Is Covered With Polystyrene Tape With A Minimum Thickness Of 1.0 Mm, With Rounded Edges And An Ergonomic Radius Of 1.0 Mm In Accordance With Ergonomic Standards Nr-17. Each Door Is Supported On Two Zamak Hinges (Zinc, Magnesium, Aluminum And Copper Alloy, Cast Between 385 °C And 485 °C) With An Opening Angle Of No Less Than 270 Degrees. Sharp Corners, Allowing Various Adjustments. The Doors Are Equipped With Double Fixing Handles, With A Handle Measuring Approximately 228 Mm In Satin-Finished Aluminum. The Right Door Of Each Module Has A Lock On The Top, Model..., Low Cabinet
|
