|
The Submersible Motor Pump Must Be Made Up Of Two Parts, A Pumper And A Motor. The Pumper Must Be Made Of Cast Iron And Contain Stainless Steel Stages. The Motor Must Be Rewindable, Lubricated And Water Cooled. The Submersible Motor Pump Must Have A Flow Rate Of 3.0 M³/H, Monometric Head Of 263 Mca, With A Two-Phase Motor Of 5.5Hp - 440Volts, Control Panel With Direct Start For The Submersible Pump Described Above At A Voltage Of 440 Volts - 60Hz - 5.5Hp, Containing A Motor Circuit Breaker, 02 Starting Capacitors, 02 Permanent Capacitors, Overload Relay, 02 Contactors, Terminals, 16Mm Wiring, Digital Ammeter, Digital Voltmeter, Activation Signal, Fault Signal, 3 Position Push Button, Channel, Din Rail, 25Mm Terminals, Cabinet With Epoxy Painting And 760 X 480 X 170 Mm Key, Flexible Galvanized Steel Conduit, Externally Coated With Pvc M 19, 62 Black, External Diameter Of 25 Mm (3/4), Multipolar Copper Cable, Flexible, Class 4 Or 5, Hepr Insulation, Covering In Pvc-St2, Bwf-B Flame Retardant, 1 Kv, 3 Conductors Of 10 Mm2, Galvanized Steel Tube With Sewing, Heavy Class, Din 2440, Dn 32 Mm (1 1/4), E = 3, 68 Mm, 3, 48 Kg/M (Nbr 5590), Bsp Thread, 04/27/2026 - 13:57:16, Galvanized Iron Sleeve, With Bsp Thread, 1 1/4, Drawer Register With E Finish Chrome Canopy, Simple, 1 1/4 Gauge, Horizontal Check Valve, Bronze (Pn-25), 1 1/4, 400 Psi, Union Nut Cap, Threaded Ends, 90 Degree Galvanized Iron Bend, With Bsp Male/Female Thread, Galvanized Iron Union, With Flat Seat, Galvanized Iron Nipple, Reduction Bushing Galvanized Iron, 1 1/2 Grounding Or Other Use, In Pvc, Dn - 250 25 Mm, For Cold Water Building Well, Multijet Hydrometer / Water Meter, Dn 1 1/4, Maximum Flow 10 M3/H, For Cold Drinking Water, Flat Watchmaking, Class B, Horizontal (Without Connections), Pead Compression Adapter Pn16 Of 40Mm X 1 1/4, Pead Compression Elbow Pn16 40Mm, 40Mm Pead Pn16 Compression Union, High Density Polyethylene Tube - Pead - Iso Cd 4427 Pe100 - Pn16 - 40Mm, Automatic Electric Float Switch 15A - 220V, Flat Cable - Plastichumbo - Gray - 2 Submerged Deep Tubular Well, Water Box Type Reservoir, With A Capacity Of 20,000 Liters, Made Of High-Density Polyethylene (Hdpe), For Storing Drinking Water. The Reservoir Must Have A Lid With Adequate Sealing And Must Be Made Of Non-Toxic Material, Resistant To The Action Of Uv Rays And Climate Variations, Ensuring Durability, Tightness And Preservation Of The Quality Of The Stored Water. Reinforced Concrete Base, To Be Executed By The Municipality., Celesc Standard Model Energy Standard, Two-Phase, Compatible With The System, With Concrete Structure And Within Celescs Technical Standards, Complete Workforce, Including Plumber, Electrician, Engineer, Helpers, Equipment Rental, Installation Of Water Network Reservoir And Power Network
|
