|
Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Removing Doors, Manually, Without Reuse. Af_09/2023, Removal Of Dishes, Removal Of Sanitary Metals, Removal Of Plastic Drain, Including Coupling, Demolition Of Mortars, Removal Of Plastic Shower, Removal Of Accessible Bars, Removal Of Iron Grid, Removal Of Aluminum Countertop With Sink, Removal And Replacement Of Cover-Channel Ceramic Tile, With Up To Two Water, Including Lifting. Af_07/2019, Removal Of Light Fixtures, Demolition Of Cobogó, Demolition Of Ceramic Coating, Demolition Of Perforated Block Masonry, Manual Excavation For Crowning Block Or Footing (Including Excavation For Placing Formwork). Af_01/2024, Slim Concrete Ballast, Applied To Crowning Blocks Or Footings, 5 Cm Thick. Af_01/2024, Manual Trench Backfilling, With Vibrating Plate. Af_08/2023, Manufacture, Assembly And Disassembly Of Shoe Formwork, In Sawn Wood, E=25 Mm, 4 Uses. Af_01/2024, Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, Concreting Footing, Fck = 25 Mpa, Using Jerica - Laying, Densifying And Finishing. Af_01/2024, Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Right Foot, 4 Uses. Af_09/2020, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, Frame Of Pillar Or Beam Of Conventional Reinforced Concrete Structure Using 10 Ca-50 Steel, Concreting Of Pillars, Using Buckets - Launching, Thinning And Finishing. Af_02/2022, Manual Excavation For Baldrame Beam Or Running Footing (Including Excavation For Placing Formwork). Af_01/2024, Assembly And Disassembly Of Formwork For Baldrame Beams, Concreting Of Beams And Slabs, Fck=25 Mpa, For Solid Or Ribbed Slabs Using A Pump - Laying, Thickening And Finishing. Af_02/2022_Ps, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 8 Steel, Slab Formwork Support In Unreinforced Wood, Including Locking, Assembly And Dismantling Of Solid Slab Formwork, Slab Frame Of Conventional Reinforced Concrete Structure Using Ca-60 5 Steel, Frame Conventional Reinforced Concrete Structure Slab Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_01/2024, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6-Inch Ca-50 Steel, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 16-Inch Ca-50 Steel, Pre-Fabricated Lintel With Up To 1.5 M Span, Thickness Of *10* Cm. Af_03/2024, In-Situ Molded Concrete Lintel For Doors With A Span Of More Than 1.5 M. Af_03/2016, Pre-Molded Girder, Fencing Masonry Made Of Horizontally Drilled Ceramic Blocks Measuring 9X19x19 Cm (Thickness 9 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Chapisco Applied To Masonry And Internal Concrete Structures, Using A Trowel. Mortar Mix 1:3 Prepared In A 400L Concrete Mixer. Af_10/2022, Plaster Or Single Putty In Mortar Trace 1:2:8, Mechanical Preparation With
|
