|
Tender for 1. Sculpture - MahobaS Betel Leaf - Technical Specification Desiging, Providing, Fabricating, And Installing 10 Ft High (7 Ft Sculpture + 3 Ft Plinth) Frp Sculpture, Executed In Premium-Grade Uv-Stabilized Frp Laminates Minimum 8 Mm Thick, Manufactured Using Chopped Strand Mat (Csm) 450 Gsm And Woven Roving 600 Gsm With Iso-Grade Resin System, Gelcoat Finish And Polymer Hardener. Frp To Be Formed Over A Fabricated Ms Structural Armature Using Ms Square/Round Pipe Section (Minimum 50×50×2.5 Mm Thick), Including Full Welding, Grinding, Stress-Relief, And Two Coats Of Zinc-Rich Epoxy Primer Followed By Polyurethane (Pu) Topcoat On Metal Elements. Surface Finishing To Include Mirror-Finish Inlays Fixed With Industrial-Grade Adhesive As Per Approved Motif Layout And Embedded Bundelkhandi Folk Motifs Engraved Or Cast Within Frp Layer. Plinth To Be Constructed In M-20 Grade Reinforced Cement Concrete With Reinforcement Confirming To Is:456, Shuttering With Waterproof Ply, Finishing, And Integrated Chemical Anchor Bolts (Hilti/Equivalent) For Anchoring Ms Frame To Rcc. Plinth Outer Surface To Be Clad In Polished Red Sandstone 20-25 Mm Thick, Machine-Cut, Fixed Using Stainless Steel Cramps/Clamps (Grade 304) And Polymer-Modified Adhesive With Pointing In Pigment-Matched Epoxy Grout. Brass Nameplate (8-10 Mm Thick) With Deep-Engraved Lettering To Be Installed With Countersunk Ss Screws. Electrical Work Includes Rgb Uplighters (2 Nos. - Ip67, Ik08) With In-Built Charge Controller, Panel Mounting Brackets, Concealed Wiring With Uv-Resistant Cable, Junction Boxes, And Testing. Rgb Lighting System: Providing And Laying Programmable Rgb Led Linear Strip/Flood Lighting, Ip65-Rated, High-Power 5050/3528/2835 Chipset, With Aluminum Channel Fixing, Silicone Encapsulation, 12V/24V Driver, Dmx-Compatible Controller, Power Supply Control Board, Weatherproof Junction Box, Flexible Conduits, Cable Routing Through Gi/Hdpe Conduit (Minimum 25 Mm Dia.), Including Termination, Tagging, Ferrule, Testing, Commissioning, And Integration With Existing Supply. Complete Including All Labour, Tools, Plants, Scaffolding, Anti-Uv Coating, Joint Sealing, Curing, Protection, And Finishing As Per Approved Drawings And The Direction Of Engineer-In-Charge. , 2. Sculpture - The Elder Craftsman Desiging, Fabrication Of 11 Ft High Life-Size Artisan Sculpture, Executed In Frp 6-8 Mm Thickness, Produced Using Hand Lay-Up Process, Reinforced With Csm 450 Gsm And Woven Roving 600 Gsm, Surface Gelcoat Resistant To Uv & Atmospheric Conditions. Internal Ms Support Frame Fabricated With Is 806/Is 1161 Compliant Steel Tubes, Welded As Per Is: 816, Ground Smooth, Inspected By Dye-Penetration Testing At Joints, And Coated With Zinc-Rich Epoxy Primer And Pu Topcoat. Sculpted Tools (Hammer, Chisel, Stone Block) To Be Integral Frp Components Reinforced With Ms Inserts Where Necessary. Exterior Finishing In Bronze Patina Multi-Layer System Including Base Coat, Shading Coat, Glaze, And Weather-Protective Clear Pu. Base: 3.5 Ft Reinforced Cement Concrete Pedestal (M-20), Steel Reinforcement Fe-500 Grade, Chemical Anchor Fixing System, Clad With Premium-Grade Granite Slabs (20-25 Mm Thick), Polished To 800-1000 Grit, Chamfered Edges, Fixed With Stainless Steel Clamps And Polymer-Based Adhesive. Rgb Lighting System: Supply And Installation Of Rgb Led Linear Lights/Spot Fixtures, Ip65/Ip67-Rated, With Aluminum Extrusion Channels, Pvc/Silicone Sealing, Dmx Controller, Waterproof Driver, 16-18 Gauge Copper Wires, Gi Conduits, Mcb Protection, Synchronization Of Lighting Sequences, Testing & Commissioning. Includes Earth Connection As Per Is:3043, Foundation Excavation/Backfilling, Hoisting, Alignment Using Spirit Level And Temporary Supports, Protective Anti-Uv Coat, Finishing Complete , Sculpture - Egksck Dk Lw;Z Eafnj (Sun Temple Of Mahoba) Desiging, Providing And Erecting 10 Ft High Frp Sculpture (10 Mm Thick) Fabricated Using Dual-Layer Woven Roving 600 Gsm And Csm 450 Gsm With Isophthalic Grade Resin System, Designed With Embedded Transparent/Colored Acrylic Panels (6-8 Mm Cast Acrylic) Supported Within Frp Recesses. The Sculpture Includes Internal Led Illumination Cavity With Access Hatch. Internal Ms Structure Designed As Per Structural EngineerS Certification For Wind Loadings Up To 180 Km/H. Surface Finishing To Be Golden Metallic Enamel, Multi-Coat System With Primer, Metallic Flakes Coat, Final Pu Topcoat. Base: 4 Ft Reinforced Cement Concrete Pedestal, Reinforcement Detailing As Per Structural Drawing, Fully Clad With Jaisalmer Yellow Stone, Machine-Cut And Mirror-Polished, Fixed With Ss Cramps. Electrical Works Include Ip-Rated Internal Led Modules, Drivers, Controller, Cable Trays Inside Sculpture, And Maintenance Access Door. Rgb Lighting System: Providing And Installing Rgb Led Accent Lighting, Ip65-Rated, With Programmable Controller, Dmx Interface Module, Gi Conduit, Copper Wiring, Junction Boxes, Mcb Protection, Earth Continuity Conductor, And Full Testing And Commissioning. Complete Including Foundation, Anchoring, Grouting, Cable Management, And Surface Finishing As Per Drawings. , 4. Sculpture - Fort Of Mangalgarh Desiging, Fabrication And Installation Of 10 Ft High Sculpture Made Of Treated Steel Scrap, Utilizing Ms Plates, Rods, Flats, Angles, Bars Of Select Thickness (4 Mm-10 Mm), Cleaned By Sandblasting (Sa 2.5 Standard), Welded Using Is-Approved Welding Electrodes, Full Penetration Welds Where Required, Visually Inspected And Tested. Surface To Undergo Rust-Induced Patina Treatment Through Chemical Oxidation, Sealed With Clear Epoxy Topcoat (2-3 Layers). Sculpture Supported On Heavy-Duty Internal Ms Frame Anchored To Reinforced Cement Concrete Plinth (M-20 Grade) Clad With Natural Stone (Random/Ashlar Masonry), Fixed With Ss Clamps. Rgb Lighting System: Providing And Fixing Rgb Led Flood Or Strip Lights, Ip65/67-Rated, On Anti-Corrosion Metal Brackets, Concealed Wiring, Dmx/Ir Controller, Driver Unit, Gi Conduit, Cable Protection, Mccb/Mcb As Required, Tagging, Termination, Testing, And Commissioning. Includes All Corrosion-Treatment Stages, Structural Frame Fabrication, Erection, Foundation Concreting, Anchor Bolt Fixing, Finishing Complete. , 5. Sculpture - Raja Parmal Desiging, Fabrication And Erection Of 12 Ft High Equestrian Statue, In Frp 10 Mm Thickness, Gel-Coated Finish, Multi-Layer Lamination, Sculpted Detailing On Armour, Horse Musculature, Ornaments, Weaponry. Internal Ms Structural Frame Designed With Triangulated Truss Geometry Ensuring Stability Against Wind-Induced Vibrations; Steel Tubes Treated With Sandblasting And Epoxy Primer. Plinth: 4 Ft Reinforced Cement Concrete Base With Fe-500 Reinforcement, Fully Clad With High-Grade Granite Slabs, Fixed With Ss Cramps (Grade 304/316). Engraved Stone Plaque Fixed With Hidden Anchors. Surface Finish: Antique Bronze Metallic Finish With Multi-Layer Pu Protective Coating. Rgb Lighting System: Installation Of Rgb Programmable Spotlight Array, Ip67-Rated, Dmx-Controlled, Drivers, Dimmers, Gi Conduits, Ryb Phase-Balanced Power Distribution, Earthing Per Is:3043, Labeling, Cable Routing, Testing & Commissioning. All Structural Fixing, Grouting, Verticality Adjustment, Surface Cleaning, And Protection Complete. , 6. Sculpture - Alha Desiging, Providing, Fabricating, And Installing 11 Ft High Frp Sculpture (8 Mm Thick), Layer Composition Csm 450 Gsm + Woven Roving 600 Gsm, High-Impact Resin System With Uv Stabilizer. Internal Structural Frame Fabricated Using Ms Pipes (50×50×2.5 Mm Min.), Epoxy Coated, Welded To Base Plate Fixed With Chemical Anchors. Mounted On Circular Reinforced Cement Concrete Plinth (M-20), Clad In Sandstone Slabs With Fine Chiselled Finish. The Base Includes Engraved Verse From Alha-Khand On Brass/Stone Plaque. Surface Finishing To Include Dark Bronze Metallic Paint, Pu Topcoat, Uv-Resistant Sealant. Rgb Lighting System: Providing And Fixing Ip65-Rated Rgb Led Edge-Lighting System Concealed In Plinth Recess, Provided With Dmx Controller, Drivers, Gi Conduit, Wiring, Earthing, And Commissioning. Includes Excavation, Foundation Concreting, Grouting, Anti-Uv Protective Coating, Finishing Complete. ,. Sculpture - Udal Desiging, Fabrication And Installation Of 11 Ft Dynamic Warrior Sculpture, Frp (8 Mm Thickness Minimum), Reinforced With Multi-Layer Frp Lamination, Internal Ms Structural Backbone Designed For Dynamic Cantilever Stresses Using Analysis Inputs. Dual-Tone Bronze-Steel Patina Finish By Multi-Layer Painting System. Mounted On Reinforced Cement Concrete Plinth (M-20), Granite Cladding 20-25 Mm Thick, Stainless Steel Cramps, Polymer Adhesive. Rgb Lighting System: Supply And Installation Of Rgb Led Spotlight/Linear Lighting System, Ip65/Ip67-Rated, Programmable, Including Driver, Controller, Conduits, Control Wiring, Earthing, Load Balancing, Testing, Commissioning. Includes Alignment, Installation, Anchor Bolt Tightening, Surface Finishing, Cleaning Complete In All Respects. , 8. Sculpture - Gorakhgiri Desiging, Providing And Fixing Spiritual Sculpture Depicting Gorakhnath Within An Abstract Hill-Form, Fabricated In Frp 10 Mm Thickness, Reinforced With Ms Skeleton Frame, Stress-Tested, Epoxy-Coated. Stone-Texture Frp Surface Created Using Multi-Layer Texture Coat, Shading Coat, And Final Weatherproof Pu Coat. Mounted On 3.5 Ft Reinforced Cement Concrete Plinth Clad With Sandstone, Fixed With Ss Cramps And Epoxy Adhesive. Brass Nameplate Fixed Flush. Optional Halo-Effect Led Illumination Integrated Within Sculpture With Concealed Access For Maintenance. Rgb Lighting System: Providing And Fixing Rgb Led Backlighting/Edge Lighting, Ip65/Ip67-Rated, Driver-Controlled, Dmx Controller Integration, Gi Conduit, Cable Management, Termination, Testing, Commissioning. Includes Foundation, Anchoring, Hoisting, Structural Inspection, Protective Coatings, Finishing Complete As Per Direction Of Engineer-In-Charge.
|
