|
Lot 01 - Plumbing - Tacha. Tachao E Beacon - Supply And Installation Of Type Ii Monodirectional Retroreflective Tacho, In Yellow Or White Color, Made Of Polyester Resin Or Synthetic Resin Of High Mechanical Resistance With Dolomite Mineral Filler, Equipped With Retroreflective Lens With Anti-Abrasive Coating, In Compliance With Abnt Nbr 14636:2021. The Tack Must Have A Body With Dimensions Of Approximately 100 By 80 By 22 Millimeters, Within The Dimensional Tolerances Permitted By The Standard. Fixing Must Be Carried Out Using A Pin Or Zinc-Plated Metal Screw 5/16 Inch By 2 Inches, Guaranteeing Resistance Exceeding 15,000 Kgf. The Material Provided Must Be Accompanied By A Conformity Report Issued By An Accredited Laboratory, Proving Full Compliance With Current Standards., Lot 01 - Plumbing - Tacha. Tachao And Beacon - Supply And Installation Of Bidirectional Retroreflective Tacho Type Ii, Lot 01 - Plumbing - Tacho. Tachao And Beacon - Supply And Installation Of Monodirectional Retroreflective Tachao, Made Of Polyester Resin Or Synthetic Resin Of High Mechanical Resistance, In Compliance With Abnt Nbr 15576:2015. The Tachao Must Have A Rectangular Body With Contoured Surfaces, Meeting The Normative Dimensions Established In Table 3 Of The Standard, With Approximate Measurement Of 250 By 150 By 50 Millimeters Within The Allowed Tolerances. The Fixing System Must Include Two Metallic Pins With A Diameter Of 12.7 ± 1.3 Millimeters, Height Of 50 ± 5 Millimeters And A Minimum Spacing Of 120 Millimeters, Guaranteeing Resistance Greater Than 15,000 Kgf. Retroreflective Lenses Must Have A Minimum Length Of 100 Millimeters And A Minimum Width Of 15 Millimeters, With An Anti-Abrasive Coating. The Material Must Be Accompanied By A Compliance Report Issued By An Accredited Laboratory, Lot 01 - Canalizacao - Tacha. Tachao And Beacon - Supply And Installation Of Bidirectional Retroreflective Tachao, Lot 01 - Plumbing - Tachao. Tachao And Bollard - Supply And Installation Of Flexible Bollard With 94 Cm Height, Approximate Weight Of 2.5 Kilograms, Cylindrical Body With 10 Cm In Diameter And Circular Base With 28 Cm In Diameter. João Bobo Type Automatic Return System, Obtained By A Set Of Elastic Bands On The Attachable Base, Allowing Flexion And Return To Vertical Position After Impact. Fixing To The Floor Using 4 Anchor Screws Included. The Bollard Must Have Side Holes For The Passage Of Chains, Ropes Or Signaling Tapes, Enabling The Delimitation And/Or Isolation Of Areas. Product Made Of Polyethylene With Protection Against Uv Rays, Resistant To Adverse Weather Conditions. Available Colors: Black Body With Yellow Reflective Strips Or Orange Body With White Reflective Strips., 04/20/2026 - 16:59:10, 04/20/2026 - 16:59:11, Lot 01 - Plumbing - Tack. Tacho And Marker - Complete Removal Of Tactile Or Vertical Signaling Devices Fixed To The Pavement, Including Tacks, Tachos, Reflective Caps Or Markers, With Removal Of The Element, Cleaning, Removal Of Waste, Recomposition Of The Pavement And Adequate Disposal Of Materials, Including All Labor, Tools, Equipment And Inputs Necessaries., Lot 02 - Vertical Signage And Vacancies - Supply Of Signage Plates - Transit - Supply Of Vertical Signage Plates Made Of Hot Dip Galvanized Steel Sheet, With Nominal Thickness Of 1,
|
