|
Tender for Laying And Jointing Pvc Pipe. Heading , Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. Sqm 266.45 , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. , 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level :1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Ce1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources)Ntering, Shuttering, Finishing And Reinforcement : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Centering And Shuttering Andffilling , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Walls (Any Thickness) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc. , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Materials.All Kinds Of Soil Cum 126.80 2.26.2 Ordinary Or Hard , Carriage Of Materials (Lime Morrum Or Building Rubbish )-By Mechanical Transport Including Loading, Unloading And Stacking (Upto 1Km) , Carriage Of Materials (Lime Morrum Or Building Rubbish )-By Manual Labour Including Loading, Unloading And Stacking For Lead Less Than 0.50 Km , Sand, Stone Aggregate Below 40Mm Nominal Size , Every Additional Lead Of 50M Or Part Thereof Beyond 1St 50M Upto 9 Such Additional Lead , Repair And Rehabilitation Items , Chipping Of Unsound/Weak Concrete Material From Slabs, Beams, Columns Etc. With Manual Chisel And/ Or By Standard Power Driven Percussion Type Or Of Approved Make Including Tapering Of All Edges, Making Square Shoulders Of Cavities Including Cleaning The Exposed Concrete Surface And Reinforcement With Wire Brushes Etc. And Disposal Of Debris For All Lead And Lifts All Complete As Per Direction Of Engineer-In-Charge 25 Mm Average Thickness , Drilling Suitable Holes In Reinforced Or Plain Cement Concrete With Power Driven Drill Machine To A Minimum Depth Of 100 Mm Upto 200 Mm In Reinforced Cement Concrete Beams, Lintels, Columns And Slabs To Introduce Steel Bars For Sunshades/ Balconies Including Fixing The Steel Bars In Position Using Epoxy Resin Anchor Grout Of Approved Make But Excluding The Cost Of Reinforcement, All Complete As Per Direction Of Engineer-In-Charge. , Structral Glazing , Providing And Supplying Aluminium Extruded Tubular And Other Aluminium Sections As Per The Architectural Drawings And Approved Shop Drawings , The Aluminium Quality As Per Grade 6063 T5 Or T6 As Per Bs 1474,Including Super Durable Powder Coating Of 60-80 Microns Conforming To Aama 2604 Of Required Colour And Shade As Approved By The Engineer-In-Charge. ( The Item Includes Cost Of Material Such As Cleats, Sleeves, Screws Etc. Necessary For Fabrication Of Extruded Aluminium Frame Work. Nothing Extra Shall Be Paid On This Account). The Weight Of Aluminium Extruded Section Shall Be Taken For Purpose Of Payment. , Semi (Grid) Unitized System Of Structural Glazing (With Open Joints) For Linear As Well As Curvilinear Portions Of The Building For All Heights And All Levels, Including: (A) Structural Analysis & Design And Preparation Of Shop Drawings For The Specified Design Loads Conforming To Is 875 Part Iii (The System Must Passed The Proof Test At 1.5 Times Design Wind Pressure Without Any Failure), Including Functional Design Of The Aluminum Sections For Fixing Glazing Panels Of Various Thicknesses, Aluminium Cleats, Sleeves And Splice Plates Etc. Gaskets, Screws, Toggles, Nuts, Bolts, Clamps Etc., Structural And Weather Silicone Sealants, Flashings, Fire Stop (Barrier)- Cum-Smoke Seals, Microwave Cured Epdm Gaskets For Water Tightness, Pressure Equalisation & Drainage And Protection Against Fire Hazard Including: (B) Fabricating And Supplying Serrated M.S. Hot Dip Galvanised / Aluminium Alloy Of 6005 T5 Brackets Of Required Sizes, Sections And Profiles Etc. To Accommodate 3 Dimentional Movement For Achieving Perfect Verticality And Fixing Structural Glazing System Rigidly To The Rcc/ Masonry/Structural Steel Framework Of Building Structure Using Stainless Steel Anchor Fasteners/ Bolts, Nylon Seperator To Prevent Bimetallic Contacts With Nuts And Washers Etc. Of Stainless Steel Grade 316, Of The Required Capacity And In Required Numbers.Fore More Details Follow Rfp And Engineer Direction , Providing, Assembling And Supplying Vision Glass Panels (Igus) Comprising Of Hermetically-Sealed 6-12- 6 Mm Insulated Glass (Double Glazed) Vision Panel Units Of Size And Shape As Required And Specified, Comprising Of An Outer Heat Strengthened Float Glass 6 Mm Thick, Of Approved Colour And Shade With Reflective Soft Coating On Surface # 2 Of Approved Colour And Shade, An Inner Heat Strengthned Clear Float Glass 6 Mm Thick, Spacer Tube 12 Mm Wide, Dessicants, Including Primary Seal And Secondary Seal (Structural Silicone Sealant) Etc. All Complete For The Required Performances, As Per The Architectural Drawings, As Per The Approved Shop Drawings, As Specified And As Directed By The Engineerin- Charge. The Igus Shall Be Assembled In The Factory/ Workshop Of The Glass Processor(Payment For Fixing Of Igu Panels In The Curtain Glazing Is Included In Cost Of Item No.25.2) For Payment, Only The Actual Area Of Glass On Face # 1 Of The Glass Panels (Excluding The Areas Of The Grooves And Weather Silicone Sealant) Provided And Fixed In Position, Shall Be Measured In Sqm. (I) Coloured Tinted Float Glass 6 Mm Thick Substrate With Reflective Soft Coating On Face # 2, + 12 Mm Airgap + 6 Mm Heat Strengthened Clear Glass Of Approved Make Having Properties As Visible Light Transmittance (Vlt) Of 25 To 35 %, Light Reflection Internal 10 To 15%, Light Reflection External 10 To 20 %, Shading Coefficient (0.25- 0.28) And U Value Of 3.0 To 3.3 W/M2 Degree K Etc. The Properties Of Performance Glass Shall B , Flooring Work , 65 Mm Thick Sand Stone Flooring Matching Same Texture Of Existing Structure Over 20 Mm (Average) Thick Base Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand) With Joints 3 Mm Thick, Side Buttered With Cement Mortar 1:2 (1 Cement : 2 Stone Dust) Admixed With Pigment To Match The Shade Of Stone And Pointing With Same Mortar. , Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) :Red Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing 40 Mm Thick , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). , Nsr Work , 4Mm Thk. Ms Steel View Cutter Type Cnc Cutted Ms Sheet With Various Pattern And Shapes Cut Outs From The Ms Sheet At Various Locations . All The Diffrent Designs On View Cutter Should Be Prior Disscussed With The Officer In Charge.All Complete. Proper Completion Of Work As Per Direction Of Engineer In Charge , Providing And Fixing The Sluice Gate As Per The Required Size Of Opening Which Is A Standard Set By The Bureau Of Indian Standards. This Standard Outlines The Manufacturing, Chemical, And Physical Requirements As Well As The Testing Methods For A Cast Iron Single -Faced Thimbel-Mounted Sluice Gate (Manual) As Per Is Code 13349. It Ensures That These Gates Meet Stringent Quality, Durability, And Performance Criteria For Water Control And Management Applications.Any Type Of Transportation And Carriage Is Included Upto The Site. All Complete As Per Direction Of Engineer-In
|
