|
Lot 1 - 1.1.0.0.1. - Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps:, Lot 1 - 1.2.1.1.10. - Manual Backfilling Of Trenches, With Percussion Soil Compactor. Af_08/2023:, Lot 1 - 1.2.1.1.1. - Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_01/2024:, Lot 1 - 1.2.1.1.2 - Mechanical Soil Compaction For Execution Of Radier, Concrete Floor Or Slab On Soil, With Percussion Soil Compactor. Af_09/2021:, Lot 1 - 1.2.1.1.3. - Separating Layer For Radiator Construction, Made Of Plastic Canvas. Af_09/2021.:, 17/04/2026 - 14:23:10, Lot 1 - 1.2.1.1.4. - Ballast With Granular Material, Applied On Floors Or Slabs On Ground, Thickness Of *5 Cm*. Af_01/2024:, Lot 1 - 1.2.1.1.5. - Manufacture, Assembly And Disassembly Of Radiator Form, In Sawn Wood, 4 Uses. Af_09/2021:, Lot 1 - 1.2.1.1.6. - Slab Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022:, Lot 1 - 1.2.1.1.7. - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10.0 Mm Ca-50 Steel - Assembly. Af_06/2022:, Lot 1 - 1.2.1.1.8. - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-60 Steel Of 5, Lot 1 - 1.2.1.1.9. - Concreting Of Pillars, Fck = 20 Mpa, Using Buckets - Laying, Thinning And Finishing.:, Lot 1 - 1.2.1.1.9 - Concreting Of Radier, Fck 20 Mpa - Laying, Thinning And Finishing. :, Batch 1 - 1.2.1.2.1. - Surface Waterproofing With Polymer Mortar / Acrylic Membrane, 3 Coats. Af_09/2023:, Lot 1 - 1.2.1.2.2. - Polyester Veil For Waterproofing:, Lot 1 - 1.3.1.0.10. - Concreting Of Beams And Slabs, Fck=20 Mpa, For Any Type Of Slab With Buckets In A Single-Story Building - Launch, Lot 1 - 1.3.1.0.1. - Assembly And Disassembly Of Rectangular Pillars And Similar Structures, Simple Straight Leg, Made Of Resin Plywood Sheet, 8 Uses. Af_09/2020:, Lot 1 - 1.3.1.0.2. - Assembly And Disassembly Of Beam Form, Without Propping, In Resined Wood Sheet, 8 Uses.:, Lot 1 - 1.3.1.0.3. - Assembly And Disassembly Of Beam Form, Shoring With Wooden Fork, Lot 1 - 1.3.1.0.4. - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-60 Steel Of 5, Lot 1 - 1.3.1.0.5. - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 Steel Of 6, Lot 1 - 1.3.1.0.6. - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 Steel Of 8, Lot 1 - 1.3.1.0.7 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 Steel Of 10, Lot 1 - 1.3.1.0.8. - Unidirectional Precast Slab, Bi-Supported, For Floor, Ceramic Filling, Conventional Joist, Total Slab Height (Filling+Cover) = (8+4). Af_11/2020:, Lot 1 - 1.4.1.0.1. - Sealing Masonry Made Of Horizontally Drilled Ceramic Blocks Measuring 9X19x19 Cm (Thickness 9 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021:, Lot 1 - 1.4.1.0.2. - Pre-Molded Lintel With Up To 1.5 M Span, Thickness Of *10* Cm. Af_03/2024:, Lot 1 - 1.4.1.0.3. - Pre-Molded Buttress, Lot 1 - 1.4.2.0.1. - Opening Aluminum Door With Paneling, With Trim, Fixing With Screws - Supply And Installation. Af_12/2019:, Lot 1 - 1.4.2.0.2. - Sliding Aluminum Window With 2 Panes For Glazing (Glasses
|
