|
Dowel-Dowel 8*10 (Or Dowel-Nail) Is A Common Fastener For Quick Installation Of Frames, Slats, Profiles And Cable Ducts To Concrete Or Brick. Consists Of A Nylon/Hdpe Sleeve And A Galvanized Self-Tapping Screw. Provides Reliable Fixation, With Size 660/70 It Can Withstand A Load Of About 50-60 Kg. It Is Often Found On Sale In Packages Of 100-200 Pcs., Single-Ended Led Lamps For General Lighting In The Republic Of Kazakhstan Are Regulated By The St Rk Gost R 54815-2014 Standard (Corresponds To Iec 62560), Which Establishes Safety And Performance Requirements For Lamps With Voltages >50 V. The Standard Covers Dimensions, Markings, Power, Luminous Flux And Color Parameters., Water-Based Facade Paint (25 Kg) Is A Weather-Resistant Material Based On Acrylic Or Latex (Gost 28196-89). It Provides High Vapor Permeability, Adhesion To Concrete/Brick, Super Whiteness (More Than 95%) And Durability. Consumption Is Usually 150-200 Ml/ Per Layer. Main Technical Characteristics (Facade, 25 Kg): Type: Water-Dispersed Acrylic (Facade). Base: Acrylic Copolymers. Weather Resistance: High, Withstands Temperature Changes And Humidity. Consumption: 150-200 Ml/ (In One Layer). Drying Time: Usually From 1 To 2 Hours To Touch (Full - Up To 24 Hours). Whiteness: High, Super White. Vapor Permeability: Yes, The Surface “Breathes”., Thread Diameter: The Closest Standard Value Is 3 Cm (According To Gost 1145-80, Technical Data On Krepcom.Ru), Specific Hardware 3 Cm Is Less Common. Length: Variable From 7 Mm To 100 Mm (For Gost 1145-80). Head Shape: Countersunk (Gost 1145-80), Semicircular (Gost 1144-80). Material: Steel, Often With A Protective Zinc Coating (Z) To Protect Against Corrosion. Spline: Straight Or Phillips (Ph)., Thread Diameter: The Closest Standard Value Is 5 Cm (According To Gost 1145-80, Technical Data On Krepcom.Ru), Specific Hardware 5 Cm Is Less Common. Length: Variable From 7 Mm To 100 Mm (For Gost 1145-80). Head Shape: Countersunk (Gost 1145-80), Semicircular (Gost 1144-80). Material: Steel, Often With A Protective Zinc Coating (Z) To Protect Against Corrosion. Spline: Straight Or Phillips (Ph)., Construction Nails 70 Mm (3X70) Are Produced According To The Gost 4028-63 Standard. Specifications Include Rod Diameter Mm, Length Mm, Flat/Conical Head Diameter Mm And Head Height Mm. Made From Low-Carbon Steel (St1ps), Can Be Uncoated (Black) Or Galvanized, A Flexible Hose For A Toilet Tank (60 Cm, 1/2) Is A Rubber Tube In A Metal Braid (Stainless Steel) Designed For Connecting Water. Main Characteristics: Withstands Pressure Up To 16-20 Bar, Operating Temperature Up To 95-100 °C. The Type Of Connection Is Usually “Nut-Nut” Or “Nut-Fitting” (1/2 Inch)., Enamel Pf-115 (Gost 6465-76) Packaged In 3 Kg Is A Universal Alkyd Paint Of Various Colors, Available In Kazakhstan For Painting Metal, Wood And Concrete. White, Gray, Blue, Green, Red, Black Are Popular. The Product Provides A Durable Glossy Finish For Exterior And Interior Use. Key Characteristics And Manufacturers: Type: Alkyd Enamel Pf-115. Standard: Gost 6465-76. Packaging: 3 Kg (Also Available In 2.8 Kg, 0.9 Kg, 20 Kg). Colors: Wide Palette: White, Gray, Yellow, Blue, Dark Blue, Black, Red, Green. Application: Weather-Resistant, For External And Internal Work (Walls, Metal Structures, Wood). Specify Paint Colors With The Customer, Gypsum Dry Plaster Mixture 2*1 Bag 25 Kg Is A Finishing Material For Interior Work, Regulated By Gost R 58279-2024 (Formerly Gost 31377-2008). It Provides High Adhesion, No Shrinkage (Cracks), Vapor Permeability And The Ability To Apply A Thick Layer At A Time. The Material Is Environmentally Friendly, Non-Flammable (Ng) And Is Intended For Leveling Walls And Ceilings. Online Store Of Standards Online Store Of Standards +4 Key Technical Characteristics (According To Gost) Base: Gypsum Binder, Fillers, Modifying Additives. Layer Thickness: Single Application From 5 To 50 Mm (In Recesses Up To 70 Mm). Maximum Particle Size: Up To 1.25 Mm (Or Up To 5 Mm For Thick-Layer). Density Of The Solution: 800–1100 Kg/M³. Consumption: ~9–10 Kg Per With A Layer Thickness Of 10 Mm. Setting Time: Typically From 45 To 180 Minutes (Beginning). Strength: Strength Grades M50-M100 (For Gypsum, Compressive Strength Is Often Regulated), Flexible Hose (Inlet) For A Mixer 60 Cm (600 Mm) Is A Standard Solution Consisting Of A Rubber Tube (Usually Epdm) In A Stainless Braid, Metal Cutting Discs With A Diameter Of 150 Mm (According To Gost 21963-2002 Or R 57978-2017) Reinforced Abrasive Wheels (Type 41 - Flat). They Are Designed For Angle Grinders, Seat Diameter 22.23 Mm, Thickness From 1.6 To 3 Mm, Operating Speed Up To 80 M/S And Maximum Speed Of About 8500-8600 Rpm. Main Technical Characteristics (Standard 180 Mm): Outer Diameter: 150 Mm. Bore Diameter: 22.23 Mm. Thickness: 1.6 Mm, 2.0 Mm, 2.5 Mm, 3.0 Mm. Profile Type: 41 (Flat) Or 42 (With A Recess In The Middle). Material (Abrasive): Normal A-Corundum (For Steel). Bond: Bf (Bakelite With Reinforcing Elements - Reinforced). Max. Speed: 80 M/S (Up To 8500-8600 Rpm). Grit: Usually 40, 46, 60 (Medium). Advantages And Applications: Thin Discs (1.6–2.0 Mm): Suitable For Clean And Fast Cutting Of Profiles And Pipes. Thick Disks (2.5-3.0 Mm): Have A Long Service Life And Strength, Suitable For Thick Metal. Gost: Compliance With “Haymaking-Abrasive” And Analogues Guarantees Safety During Storage Of Revolutions. When Working With 150 Mm Discs, Be Sure To Wear The Trimm Protective Cover, A Crowbar Is An All-Metal Hand Tool For Dismantling, Splitting Concrete, Ice And Using It As A Lever. Key Characteristics: Length 1000-1500 Mm, Diameter 20-30 Mm, Material - High-Strength Carbon Or Forged Steel, Weight From 3 To 6 Kg., Quicklime Construction Lime (Calcium Oxide +) In The Republic Of Kazakhstan Is Regulated By Gost 9179-77 (Or 9179-2018), It Is White Pieces Or Powder Obtained By Firing Limestone. Main Characteristics: High Activity (Active Content From 70 To 90%+), Low Humidity And Classification By Extinguishing Speed (Fast, Medium, Slow). Main Technical Characteristics (According To Gost 9179-77): Classification: Air (For Dry Conditions) And Hydraulic (For Wet Conditions). Activity (Cao + Mgo): For The 1St Grade - No Less Than 80-90%, 2Nd - From 70-80%, 3Rd - From 60-70% (Depending On The Type). Co₂ Content: Typically No More Than 3–7% (Indicates The Degree Of Roasting). Humidity: For Ground Quicklime, Usually No More Than 0.5–1%. Dispersity (For Ground): Residue On Sieve No. 02 - No More Than 1%, No. 008 - No More Than 10-15%. Extinguishing Time: Fast (Up To 8 Minutes), Medium (Up To 15 Minutes), Slow (More Than 15 Minutes). Types By Release Form: Lump (Boiling): Pieces Of Light Gray Color That Require Quenching Before Use., Technical Characteristics Of Construction Nails 100 Mm (4.0×100) Are Regulated By Gost 4028-63. These Are Steel Hardware (Low Carbon Steel) With A Flat/Conical Head, 4.0 Mm Shaft Diameter And 100 Mm Length, Often Uncoated, Used For The Construction Of Timber Structures. Technical Specification Of Construction Nails (100*4.0Mm): Type: Construction, Flat Head. Length (100 Mm: Rod Diameter ():4.0 Mm. Material: Steel, Low Carbon, Uncoated (Black) Or Galvanized. Head Diameter: 7.0-8.0 Mm. Compliance With Standards: Gost 4028-63. Application: Construction, Installation Of Wooden Structures (Timber, Board)., Thread Diameter: The Closest Standard Value Is 7 Cm (According To Gost 1145-80, Technical Data On Krepcom.Ru), Specific Hardware 7 Cm Is Less Common. Length: Variable From 7 Mm To 100 Mm (For Gost 1145-80). Head Shape: Countersunk (Gost 1145-80), Semicircular (Gost 1144-80). Material: Steel, Often With A Protective Zinc Coating (Z) To Protect Against Corrosion. Spline: Straight Or Phillips (Ph)., Professional Polyurethane Foam L (850/870 Ml) Is A High-Performance One-Component Polyurethane Sealant (Up To 65-70 Liters Of Output) With Excellent Adhesion. Used For Installation Of Windows/Doors, Thermal And Sound Insulation. Application Temperature Is Usually From Up To (Summer) Or Lower For Winter Versions, Dowel-Dowel 670 (Or Dowel-Nail) Is A Common Fastener For Quick Installation Of Frames, Slats, Profiles And Cable Ducts To Concrete Or Brick. Consists Of A Nylon/Hdpe Sleeve And A Galvanized Self-Tapping Screw. Provides Reliable Fixation, With Size 660/70 It Can Withstand A Load Of About 50-60 Kg. Often Found On Sale In Packages Of 100-200 Pcs., Wood Saws Are Manufactured In Accordance With Gost 26215-84. The Main Characteristics Include 3 Types Of Blades (Transverse, Longitudinal, Universal), The Length Of The Working Part From 250 To 500 Mm Or More, And The Tooth Pitch From 2.5 To 4.0 Mm. The Tool Is Designed For Manual Sawing Of Wood, Often Equipped With Handles Made Of Impact-Resistant Materials, Cement M400 (According To Gost 31108-2003, Gost 10178-85) Is A High-Strength Portland Cement That Can Withstand A Load Of 400 Kg/Cm² (Or Strength Class 32.5 Mpa) On The 28Th Day. Main Characteristics: Onset Of Setting > 60 Min, Compressive Strength > 30 Mpa, Density (Loose) 1000-1200 Kg/M³. Suitable For Concrete Structures With High Strength Requirements. 50 Kg Bag, Stepladder3-Section Aluminum Stepladder (Type Sas, Lpa) Is A Mobile Service Tool Designed For Work At Heights Of Up To 5-6 Meters. It Is Made Of High-Strength Aluminum Profile (Gost 22233-2001), Can Withstand A Load Of 150-200 Kg, Has Anti-Slip Steps, A Working Platform With A Fence And Is Often Equipped With Wheels For Transportation., For Whitewashing With Lime, Fly Brushes (Km) Or Paint Brushes That Comply With Gost 10597-87 And Gost R 58516-2019 Are Used. They Have A Diameter Of 60-65 Mm (Fly) Or Flat Shape (Fly) With Natural Bristles/Mixed Bristles That Are Resistant To Lime, Providing High Absorbency And Uniform Application Over Large Surfaces., Paint Rollers Are Regulated By Gost 10831-87 And Gost R 58517-2019 Standards, Which Define The Technical Conditions For Painting Work. Main Types: Vm (Fur), Vmp (Fur For The Floor), Vmu (Fur Corner). They Consist Of A Metal Rod, A Handle (Polyethylene Gost 16338) And A Replaceable Coat. Standard Length Is From 100 To 250 Mm, Diameter Is 40–90 Mm., Paint Brushes Are Characterized By Their Width (Usually 25–100 Mm), Bristle Type (Natural, Synthetic, Mixed), Shape (Flat/Flat, Round, Radiator) And Handle Material. Key Parameters Include Pile Length, Tuft Thickness And Hardness, Which Determine The Type Of Paint (Water/Oil) And Application., Water-Based Facade Paint (25 Kg) Is A Weather-Resistant Material Based On Acrylic Or Latex (Gost 28196-89). It Provides High Vapor Permeability, Adhesion To Concrete/Brick, Super Whiteness (More Than 95%) And Durability. Consumption Is Usually 150-200 Ml/Per Layer, Thread Diameter: The Closest Standard Value Is 1.6 Mm (According To Gost 1145-80, Technical Data On Krepcom.Ru), Specific Hardware 1.5 Mm Is Less Common. Length: Variable From 7 Mm To 100 Mm (For Gost 1145-80). Head Shape: Countersunk (Gost 1145-80), Semicircular (Gost 1144-80). Material: Steel, Often With A Protective Zinc Coating (Z) To Protect Against Corrosion. Spline: Straight Or Phillips (Ph)., P30-Nails Are Fasteners In The Form Of A Rod (Cylindrical, Parallelepiped) With A Sharp Top And A Flat Or Conical Head. Main Characteristics: Length (20–250 Mm), Rod Diameter (1.2–6 Mm) And Material (Carbon/Stainless Steel). There Are Construction, Tar Paper (With A Wide Head) And Special Ones, Often With A Zinc Coating For Protection Against Corrosion., Main Technical Characteristics And Types: Coating Types: Rutile (Stable Arc, Easy Ignition), Basic (High Strength, Impact Strength, For Critical Structures, Eg Uoni-13/55), Cellulose (For Pipe Welding), Acidic. Rod Diameter: Selected According To The Thickness Of The Metal: 2-3 Mm For Thin Metal, 4-5 Mm For Thick Metal (6-12 Mm). Welding Current: Rutile (Ano-21, Mp-3) Operate On Ac/Dc, Basic (Uoni) - Mainly On Dc.
|
