|
Tender for Exavation Over Area N .Exc 1.50M Deep And Getting Out In Any Type Of Soil By Mechanical Means Including Getting Out And Disposal Of Excavated Earth Lead Upto 50M And Lift Upto 1.5M, Complete All As Specified And Directed. , Returning, Filling In (Soil) Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exceeding 25 Cm Thick In Any Type Of Soil, Complete All As Specified And Directed. , Cement Concrete Type D-2 (1:4:8) Using 40 Mm Graded Crushed Stone Aggregates In Foundation Filling And Mass Concrete Complete All As Specified And Directed. , Reinforced Cement Concrete M-25 (Design Mix) As In Foundation Including Raft Footing, Foundation Beam And Plinth Beam, Bases Of Column, Etc., Complete All As Specified And Directed. , Reinforced Cement Concrete M-25 (Design Mix) As In Column, Pillar, Piers, Post And Struts Etc., Complete All As Specified And Directed. , Reinforced Cement Concrete M-25 (Design Mix) As In Beam, Lintel Beam Etc. Over 1.5M Span Complete All As Specified And Directed. , Reinforced Cement Concrete M-25 (Design Mix) In Slab Supported On Walls, Beam And Column In Floor, Roof, Landing, Balconies, Canopies, Deck Slab And In Shelves And Like, Complete All As Specified And Directed. , Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams Rough Finish Surface Of Concrete, Complete All As Specified And Directed. , Formwork To Sides Of Pillar, Post, Struts, Piers, Column Square, Rectangular Or Polygonal Rough Finished Surface Of Concrete, Complete All As Specified And Directed. , Formwork To Sides And Soffit Of Floor Or Roof Beam Haunchings, Girder, Bressumers Etc., Rough Finished Surfaces Of Concrete, Complete All As Specified And Directed. , Formwork To Soffits Of Suspended Slab Such As Roof Slab, Floor Slab Landing And Similar Work Not Exceeding 200Mm Thick Rough Finished Surfaces Of Concrete, Complete All As Specified And Directed. , Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors, Window Cills, Concret Walls, Floor And Roofs N Exc 20Cm Wide And Sides Of Rcc/ Plain Cement Concrete Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10 Cm But N Exc 20 Cm Wide Rough Finish Surface Of Concrete, Complete All As Specified And Directed. , Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9 Mmm Dia Or Securing With Clips, Complete All As Specified And Directed. , Tmt Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Bindings With And Including Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia Or Securing With Clips, Complete All As Specified And Directed. , Brick Work With Old Size Bricks, Straight Or Curved On Plan Exceeding 6M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And Directed. , 10 Mm Thick Rendering On Fair Faces Of Brick Work Or Concrete Surface In Cm 1:6 And Finished Even And Fair Without Using Extra Cement, Complete All As Specified And Directed. , 15 Mm Thick Rendering On Other Than Fair Faces Of Brick Surfaces In Cement Mortar 1:4 And Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And Directed. , 5Mm Thick Plastering On Ceiling Surfaces In Cm (1:3) And Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And Directed. , Preparation Of Newly Plastered Surfaces Of Walls And Applying Three Coats Of White Wash, Complete All As Specified And Directed. , All As Per Serial Iten No-19, Here-In-Before But On Ceiling Surfaces. , Preparation Of New Plastered Surfaces Of Walls And Applying Two Coat Of Cement Base Paint Over A Coat Of Alkali-Resistant Priming Paint, Complete All As Specified And Directed. , Hardcore Of Broken Bricks Of Gauge N Exc. 63 Mm, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface Complete All As Specified And Directed. , 100 Mm Thick Plain Cement Concrete 1:4:8 Type D-2 (Using 40Mm Graded Aggregate) For Sub Base In Flooring, Complete All As Specified And Directed. , 50Mm Thick Plain Cement Concrete 1:2:4 Type B-2 (Using 40 Mm Graded Aggregate) For Flooring Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And Directed. , 75 Mm Thick Plain Cement Concrete 1:3:6 Type B-2 (Using 40 Mm Graded Aggregate) As In Plinth Protection, Complete All As Specified And Directed. , 25Mm Thick Plain Cement Concrete M-15 (Nominal Mix) Cement Concrete Type B-1, 1:2:4 (20Mm Graded Stone Aggregate) As In Sub Base Of Floor, Complete All As Specified And Directed. , Machine Cut Kota Stone Slab Flooring 20-25Mm Thick Over And Including Cement Screed Bed In Cement Mortar 1:6, 20Mm Thick Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing, Complete All As Specified And Directed. , All As Per Serial Iten No-27, Here-In-Before But On Vertical Surface Such As Riser, Skirting But On Backing Layer Of Cement Mortar 1:4, 15Mm Thick, Complete All As Specified And Directed. , 1.0 Mm Thick Mild Steel, Plain Black Sheet In Steel Gates/ Doors Cut To Size, Holes Punched, Including Round Headed Screw, Clout Nails Or Rivets And Fixed To Steel Framing With Plain 40Mm Lap Joints With Riveted Or Welded Seams, Including Bending Or Turning Up, Mitred Angles Etc, As Required, Complete All As Specified And Directed. , Framed Work In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc., Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings (Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides) And Hanging Conforming To Fe-410-W (Gde-E-250) Quality A, Complete All As Specified And Directed. , Stairs (Framed) Including Stringers, Treades, Landing, Balusters, Hand Rails Etc. Including Cleats, Brackets, Etc. Complete Conforming To Fe-410-W (Gde-E-250) Quality A, Complete All As Specified And Directed. , Preparation Of New Steel Surface Of Any Description Not Exc. 10 Cm In Width Or Girth When Unconnected With Other Painting Or When Painted In A Different Tint And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Zinc Chrome Primer, Complete All As Specified And Directed.
|
