Bids Are Invited For Price Registration For Possible Acquisition Of Permanent Materials in Brazil

Work Detail

File For Hanging Folders: (Aq-03), Specification Standard: Steel File For Hanging Folders, 1335Mm High, With 4 Drawers Mounted On Telescopic Rails That Allow Total Opening, Equipped With Leveling Shoes On The Base. Constituents • Steel Sheet Sae 1010/1020: - Body And Internal Structure In Sheet 22 (0.75Mm); - 24 Sheet Metal Drawers (0.60Mm); - Telescopic Rails And Zinc Plated Guides In Plate 18 (1, 20Mm) Or Higher; - Sheet Metal Drawer Locking Rod 16 (1.50Mm); - Lower Closing (Next To The Floor) In Plate 24 (0.60Mm). • Handles Made Of Metallic Material With A Steel Finish. • Cylindrical Drum Lock (Minimum 4 Pins) With Simultaneous Drawer Locking System. • Duplicate Keys. • Folder Compressors In All Drawers. • Printed Or Overlapped Label Holders, The Latter Being Exclusively Made Of Non-Ferrous Metal Alloy, Chromed Or Nickel-Plated. • Drawers Equipped With Telescopic Rails Made Up Of Linear Guides With Steel Ball Bearings, With A Minimum Vertical Load Capacity Of 45 Kg And Anti-Escape Mechanism. • Chrome Metal Leveling Shoes With Injected Polypropylene Base With Dimensions 35Mm X 3/8 X 1 (See References). • Nut Internally Welded To The Base For Fixing The Shoes. • Electrostatic Painting In Epoxy/Polyester Hybrid Powder Paint, Polymerized In An Oven, Smooth And Glossy Finish, Minimum Thickness Of 40 Micrometers In Gray Color (See References). Manufacturing • For Manufacturing, It Is Essential To Follow Technical Details And Specifications And Comply With The Recommendations Of Specific Standards For Each Material. • The Internal Structure Must Be Joined To The File Body Using Spot Welding. The Points Must Have A Maximum Spacing Of 40 Cm Between Each Other. • The Horizontal And Vertical Stops Must Be Joined By Welding In Such A Way That A Single Structure Is Created With The Disappearance Of The Seams. • The Drawers Must Be Equipped With Backing On Their Front Part Along The Entire Length Of The Piece. Fixing Screws, 2-Door Steel Cabinet: (Ar-02) Standard Specification: Steel Cabinet, 1600Mm High, Divided Vertically Into 2 (Two) Compartments By Means Of Partitions With Independent Doors, Equipped With 3 (Three) Removable And Adjustable Shelves In Each Compartment. Constituents Steel Sheet Sae 1010/1020. Body, Partitions And Doors In 22 Plate (0.75Mm); Shelves And Door Reinforcement In Sheet Metal 20 (0.90Mm); Metal Base 18 (1, 25Mm);Door Locking Bars Ø = ¼” (Minimum);Hinges Made Of Metal Plate 14 (1,9Mm). Each Door Must Give Access To An Independent Compartment, Separated By Means Of A Vertical Divider. 03 (Three) Shelves Per Compartment, Removable And Adjustable. Internal Hinges No Visible On The Exterior Of The Furniture With A Minimum Height Of 75Mm - Three Units Per Door. Fully Metal Handle And Canopy, Made Of Non-Ferrous Alloy, Chrome-Plated, With Locking Using A Cylindrical Barrel Lock Built Into The Handle With At Least 4 Pins. Printed Or Overlapping Label Holders, The Latter Being Exclusively Made Of Chrome-Plated Non-Ferrous Metal Alloy. Electrostatic Painting In Hybrid Epoxy/Polyester Powder Paint, Minimum Thickness Of 40 Micrometers In Gray Color (See References). Salt Mist For At Least 240 Hours

Contact Information