|
Heating Batteries Aluminum Heating Radiators; (10 Sections) - 1 Pc Battery; High Heat Dissipation; Compact Dimensions; Light Weight; Modern Design. Aluminum Heats Up Quickly, So Heat Loss Due To Heating Of The Device Itself Is Minimal. Heating Equipment Made From This Metal Has A Long Service Life And Does Not Require Complex Maintenance During Operation. Pcs 10, Elbows With Thread (Duck) Steel Elbow No. 20 With Thread; Weight, Kg-0.31; Length, Mm-90; Inner Diameter, Mm-20; Thread Type: External; Thread Diameter, Inch-3/4; Working Pressure, Bar-16; Retraction Angle, °C-90; Material: Steel; Diameter, Mm-20; Type Of Installation - Thread; Maximum Application Temperature, °C-300; Wall Thickness, Mm-2.8; Pcs 20, Metal Self-Tapping Screws For Fastening The Roof; Roofing Screws For Metal Dilwis With Press Washer And Drill 5.5X19 Mm 1 Kg; Pack 25, Fung (Tape) (Yellow For Gas) Fum Tape Zubr Thickness 0.2 Mm, Density 0.40 G/Cm3, Width 25 Mm; Pcs 10, Lock Nut Cast Iron Lock Nut. 20 Gost8968-75 Fittings, Fittings; Diameter, Mm-20; Material-Cast Iron; Pcs 20, Electrodes Electrode Type - For Manual Arc Welding: Electrode Material - Metal Alloy; Purpose - Universal Electrode Diameter - 3.2 Mm; Electrode Length - 35 Cm Minimum Operating Current - 80 A, Maximum Operating Current - 130 A; Welding Mode - Ac/Dc, Welding In All Positions - Yes; Set Of Electrodes - Yes Kg 40, Metal Self-Tapping Screws For Fastening Profiled Wall Sheets; Roofing Screws For Metal Dilwis With Press Washer And Drill 5.5X19 Mm 1 Kg; Pack 30, Pipes Ø57mm Ø57mm -For Heating; Boiler Pipe D= 57 Brand: 12Х1мф; Wall Thickness - 3.5Mm; Diameter - 57Mm; M 30, Disc (Cutting Ø110mm) Pcs 100, Leaf-S Hot Rolled Sheet S= 8 Mm, Opening: 1.5X6 M; Pcs 1, Pipe (Square) (Bundle Between The Posts For Fastening The Profiled Sheets Of The Wall) Roof Sheathing (Profile Pipe 60X30x3) Wall Thickness 3 Mm; Height 30 Mm; Width 60 Mm Section Rectangular; Color Gray; Size 60X30x3 Mm; Brand St3; Weight Per Linear Meter 3.83 Kg Length 6 M; Weight Of One Piece (6 M) 22.98 Kg; M 90, Square Profile (60X30) Roof Sheathing (Profile Pipe 60X30x3) Wall Thickness 3 Mm; Height 30 Mm; Width 60 Mm Section Rectangular;Color Gray Size 60X30x3 Mm; Brand St3; Weight Per Linear Meter 3.83 Kg; Length 6 M; Weight Of One Piece (6 M) 22.98 Kg M 150, Pipe Ø159mm (Stands) 159X2.5Mm; Pipe Wall Thickness Is 2.5 Mm; Type Of Pipe: Seam; Outer Diameter - 159Mm; The Cross-Section Of The Pipe Is Round; Pipe Type: Electric Welded; An Electric-Welded Pipe Is A Product Made From Strips Or Rolled Sheets By Molding And Subsequent Electric Welding. After This, The Pipe Is Subjected To Heat Treatment. M 45, T-Beam No. 14 (Roof Crossbar) I-Beam 14, Steel Grade St1-3Sp/Ps, Length 12 M; Steel Grade: St1-3Sp/Ps; Length: 12 M; Height: 140 Mm; I-Beam No. 14 Made Of Carbon Steel Grades St1-3Sp/Ps, 12 Meters Long, Intended For Use In Construction And Industry. It Is Used In The Construction Of Building Frames, Bridges, Overpasses And Other Metal Structures That Experience Severe Static And Dynamic Loads. The I-Beam Profile Ensures Uniform Stress Distribution And Increases Resistance To Bending. The Beam Has Been Certified And Fully Complies With Domestic Quality Standards. Материал Отличается Высокой Прочностью И Устойчивостью К Неблагоприятным Внешним Воздействиям, Что Позволяет Использовать Его В Различных Климатических Условиях. Optimized Material Consumption During Production Makes The Product Cost-Effective And Rational For A Wide Range Of Applications. Characteristics Of I-Beam No. 14: - Steel Grade: St1-3Sp/Ps, - Length: 12 Meters, - Profile: I-Beam, - Application: Industry And Construction; M 30, Pipe Ø159mm (Stands) 159X2.5Mm; Pipe Wall Thickness Is 2.5 Mm; Type Of Pipe: Seam; Outer Diameter - 159Mm; The Cross-Section Of The Pipe Is Round; Pipe Type: Electric Welded; An Electric-Welded Pipe Is A Product Made From Strips Or Rolled Sheets By Molding And Subsequent Electric Welding. After This, The Pipe Is Subjected To Heat Treatment. M 45, Corrugated Sheeting (6 Meters Each) Assessment (For Walls); Profiled Sheeting Ns-35 0.6 Mm 1000 Mm Galvanized; M 150, Corrugated Sheet For The Roof (9 Meters Each), Painted Solid; Profiled Sheet Of The Mp-35 Brand Is A Material That Is Used For Roofing Residential And Industrial Premises, Cladding Facades, Erecting Fencing And Fencing. Thanks To Its High Anti-Corrosion Properties, This Type Of Corrugated Sheet Perfectly Withstands Negative Environmental Conditions And Has Good Resistance To Deformation Under The Influence Of Wind Load. Advantages: High Strength And Resistance To Corrosion (Galvanized Or Polymer Coating) Easy Installation Due To Convenient Dimensions And Low Weight; Possibility Of Quick Repairs Increased Resistance To Torsion And Deformation Under The Influence Of Wind Loads Or Impacts. Wide Range Of Colors (Standard Ral Palette); Application: Facade Cladding Manufacturing Of Load-Bearing Structures, Fences And Enclosures Roofing Of Residential Buildings And Outbuildings; Characteristics: Thickness: 0.45–0.9 Mm;Usable/Total Width: 1035/1076 Mm;Profile Height: 35 Mm;Length: From 0.5 To 12 M (On Request);Coating: Painted Pcs. 20, Bends Ø57mm - For Heating; Branch Material Steel Working Medium Liquid Medium, Non-Aggressive Medium, Oil, Aggressive Medium, Water, Gas, Steam, Air, Steam-Water Mixture Dimensions Dn15 The Bend Is An Important Component Of Pipeline Fittings. If The Pipeline Is Operated Under Normal Conditions, Without Being Exposed To Chemically Active Substances, Extreme Humidity, Critically Low Or High Temperatures, Steel Bends Are Used. They Are In High Demand In All Spheres Of The National Economy. Pcs 15
|
