|
Bids Are invited for Refer SoQ Item No. 1. Supply of LED Street Light 25 W 2500 Lumens. - Item No. 1. Supply of LED Street Light 25 W 2500 Lumens (min), CRI greater than or equal to 70, efficiency 120 lm-w system wattage should not exceed 25 W plus or minus 2 per cent, Life 50,000 hrs. at the rate of L70, System warrantee, made of Pressure Die-Cast Aluminium, high power LED and lens embedded, PC cover. The light should supply with replacement warrantee of OEM certificate for 50,000 burning hours or 5 years operating life span and as per the Technical Specification for wall Area mounted light. , Refer SoQ Item No. 2. Supply of LED flood Light 30 W Lumens. - Item No. 2. Supply of LED flood Light 30 W Lumens, min, CRI greater than or equal to 70, efficiency 120 lm-w system wattage should not exceed 50W plus or minus 2 per cent, Life 50,000 hrs. at the rate of L70, System warrantee, made of Pressure Die-Cast Aluminium, high power LED and lens embedded, PC cover as per the Technical Specification for wall Area mounted light. , Refer SoQ Item No. 3. Installation, Testing and Commissioning of prewired, outdoor LED fitting on the existing poles. - Item No. 3. Installation, Testing and Commissioning of prewired, outdoor LED fittings of all types complete with accessories on the existing Poles, bracket arm including alignment and connection with 3c x single core 1.5 sq.mm PVC insulated FRLS copper conductor cable, bottle thimble, Lugs etc., earthing, interconnection including lux profiling as per approved lighting design report submission complete as required. , Refer SoQ Item No. 4. Installation, Testing and Commissioning of prewired, outdoor LED fitting on the existing bracket arm. - Item No. 4. Installation, Testing and Commissioning of prewired, outdoor LED fittings of all types complete with accessories on the existing bracket arm, boundary wall including alignment and connection with 3 core x 1.5 sq.mm PVC insulated FRLS copper conductor cable, bottle thimble, Lugs etc., earthing, interconnection including lux profiling as per approved lighting design report submission complete as required. , Refer SoQ Item No. 5. Supply, Fabrication and fixing of L-shape bracket. - Item No. 5. Supply, Fabrication and fixing of L-shape bracket made with 40 mm dia B Class G.I. Pipe, having the LED street Light Fixing arm at an angle of 45 degree w.r.t. to horizontal plane, Overall length of the bracket shall be 1500 mm, involving all well finished cutting, bending, drilling and welding the G.I. pipe to the required shape and size as required, including proving and fixing all allied bolt, nuts, fastener, also painting with primer and finished spray paint of 2 coat as per the attached drawing and as approved by Engineer-in-Charge. , Refer SoQ Item No. 6. Supplying, fabrication and fixing of L-Shape bracket for mounting LED Flood light. - Item No. 6. Supplying, fabrication and fixing of L-Shape bracket for mounting LED Flood light made out of 3 mm thick and 100 mm wide M.S. flat having vertical and horizontal arm of length 800 mm and 1000 mm. Also providing 200 mm length 3 mm thick, 100 mm width M.S. Flat across the horizontal end of the L-Shape bracket, having oval shape cut out-hole for fastening M10 bolt up to a length of 50 mm to securely hold the LED Flood light fitting at both edge of 10 inches length. The vertical portion of the bracket shall have similar oval shape cut out at two specific locations for gripping the pole or wall involving all well finished cutting, bending, drilling, welding the M.S. Flat to the required shape and size as required, including proving and fixing all allied bolt, U-shape nuts, Anchor fastener, also painting with primer and finished spray paint of 2 coat as per the attached drawing and as approved by Engineer-in-Charge. , Refer SoQ Item No. 7. Supply and fixing of IP 65 Sintex SMC Junction box. - Item No. 7. Supply and fixing of IP 65 Sintex SMC Junction box size 300 x 200 x 105 mm on wall surface or pole along with all accessories such as 63 A 4-way connector, 0.5A MCB, nuts, bolts etc. as required. , Refer SoQ Item No. 8.a. Supply of following XLPE insulated PVC sheathed armoured Al. conductor cable. A. 4C x 25 Sqmm. - Item No. 8.a. Supply of following size XLPE insulated PVC sheathed armoured aluminium conductor cable of 1.1 KV Grade confirming to IS 7098 Part 1 with up-to-date amendment etc., complete as required.a. 4 core x 25 Sqmm. , Refer SoQ Item No. 8.b. Supply of following size XLPE insulated PVC sheathed armoured Al. conductor cable. B. 3.5 core x 240 Sqmm. - Item No. 8.b. Supply of following size XLPE insulated PVC sheathed armoured aluminium conductor cable of 1.1 KV Grade confirming to IS 7098 Part 1 with up-to-date amendment etc., complete as required.b. 3.5 core x 240 Sqmm. , Refer SoQ Item No. 9. Providing, laying and fixing 50 mm dia G.I. pipe medium class. - Item No. 9. Providing, laying and fixing 50 mm dia G.I. pipe medium class, across PCC, RCC, Bituminous pavement or drain wall for crossing UG cable, complete with allied G.I. fittings including making good the damages with proper cement concrete proportion to the satisfaction of Engineer-in-Charge. , Refer SoQ Item No. 10. Excavation of the cable trenches in hard rock. - Item No. 10. Excavation of the cable trenches in hard rock not exceeding 1.5 meters in width, and lift up to 1.5 meters, including getting out the excavation soil and disposal of excavation soil as directed within a lead of 50 meters. , Refer SoQ Item No. 11.a. Laying of 1 number PVC insulated and PVC sheathed, XLPE power cable. A. 4C x 25 Sqmm. - Item No. 11.a. Laying of one number PVC insulated and PVC sheathed, XLPE power cable of 1.1 KV grade of following size in the existing RCC, HUME, METAL pipe as required.a. 4 core x 25 Sqmm. , Refer SoQ Item No. 11.b. Laying of 1 number PVC insulated and PVC sheathed, XLPE power cable. B. 3.5C x 240 Sqmm. - Item No. 11.b. Laying of one number PVC insulated and PVC sheathed, XLPE power cable of 1.1 KV grade of following size in the existing RCC, HUME, METAL pipe as required.b. 3.5 core x 240 Sqmm. , Refer SoQ Item No. 12.a. Supplying and making end termination with brass compression gland and al. lugs for following size cable. A. 4C x 25 Sqmm - Item No. 12.a. Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed, XLPE aluminium conductor cable of 1.1 KV grade as required.a. 4 core x 25 Sqmm , Refer SoQ Item No. 12.b. Supplying and making end termination with brass compression gland and al. lugs for following size cable. B. 3.5C x 240 Sqmm. - Item No. 12.b. Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed, XLPE aluminium conductor cable of 1.1 KV grade as required.b. 3.5 core x 240 Sqmm. , Refer SoQ Item No. 13. Supplying and laying of following size DWC, HDPE pipe. 40 mm dia. PE-63, PN-6. - Item No. 13. Supplying and laying of following size DWC, HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc., conforming to IS 14930, Part II complete with fitting, cutting, jointing etc., direct in ground, 75 cm below ground level, including excavation and refilling the trench in all types of soil except Bituminous, concrete road or pavement but excluding sand cushioning and protective covering etc., complete as required.40 mm dia. PE-63, PN-6. , Refer SoQ Item No. 14. Supply, laying, Jointing and commissioning of 90mm dia HPDE pipe PN6 grade PE63 confirming to IS 4984-2016 by trenchless method by carrying out HDD. - Item No. 14. Supply and laying, Jointing and commissioning of 90 mm dia HPDE pipe PN6 grade PE 63 confirming to IS 4984-2016 by trenchless method by carrying out Horizontal Directional Drilling HDD along or across various flexible or rigid pavement like Runway or Taxiway and service Road or Drain etc. at various site or location as per the drawing approved by AAI including survey, information collection regarding underground utilities, sensing of utilities by sensing equipment, pit making, pilot drilling, pre-reaming, pulling the supplied duct of various size as per the design invert level and Providing barricades and necessary warning signal lights, restoration of Paved Surfaces or Utilities etc. as required. , Refer SoQ Item No. 15.a. Supplying and fixing of following size couplers HDPE pipe. A. 90 mm dia, OD-90 mm and ID-80 mm nominal, PE-90, PN-10. - Item No. 15.a. Supplying and fixing of following size couplers HDPE pipe ISI marked with complete interconnection pipe etc. as required at site, conforming to IS 14930, Part II.a. 90 mm dia, OD-90 mm and ID-80 mm nominal, PE-90, PN-10. , Refer SoQ Item No. 16. Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories. - Item No. 16. Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc., with charcoal or coke and salt as required. , Refer SoQ Item No. 17. Providing and fixing 6 SWG dia G.I. Wire. - Item No. 17. Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface, recessed conduit, submain wiring, cable as required. , Refer SoQ Item No. 18. Dismantling of existing LED fitting, Solar Plate perimeter lighting system. - Item No. 18. Dismantling of existing LED fitting, Solar Plate perimeter lighting system consisting of bracket, Jn-Box, wires, End termination, cable on wall surface, protection pipe, LED fittings from wall and pole of height up to 7 Mtr etc. complete with interconnection wires and earthing etc. as required at site. , Refer SoQ Item No. 19. Supply of 6 mtr. high G.I. Octagonal continuously tapered galvanised street light pole - Item No. 19. Supply of 6 mtr. high G.I. Octagonal continuously tapered galvanised street light pole with minimum 500 mm long single arm GI bracket, length of bracket shall be based on design as directed by EIC, for installation of LED street light luminaire suitable for wind velocity as per IS 875 fabricated out of 3 mm thick High Tensile Steel Sheet or plate in single section, suitable for installation on a precast foundation with supply of 4 nos. of foundation bolt and anchor plate, rigid flange plate, 220 x 220 x 12 mm min. or as per IS, welded with the base of pole for fixing on foundation bolts complete as reqd. for structural stability as specified, weather proof and vandal resistant door flash with the exterior surface containing a terminal plate of 5 mm thick Bakelite sheet with 32A heavy duty connector for loop-in loop-out cable termination suitable for 2 nos. 2 core 25 sqmm. cables for fixture connections, 0.5A MCB, earthing bolts for continuous earth connections complete as required and as specified. The top and bottom dia of the pole shall not be less than 70mm and 130mm respectively. Make - Wipro, Havells, Paruthi Engineers Pvt. Ltd., Keselec, Model Valmont, or equivalent. , Refer SoQ Item No. 20.a. Supply of Fiberglass Frangible Pole.... A. 1 mtr height, 50mm dia with single GRP Arm length 500mm having 50mm dia at 15 deg. complete with Al. fix base plate. - Item No. 20.a. Supply of Fiberglass Frangible Pole of various height and diameter as details below- Fiberglass Perimeter lighting poles of various heights and diameters with Aluminium or HDG base plate as mentioned inline items and HDG foundation bolts with external Junction box and 1 nos. MCB, 4-way terminal block meeting frangibility criteria as per ICAO Technical Specification-The Fibre glass Pole material must be UV Resistant type tested as per ASTM G154 for Min. 2000 hours, Equivalent to 20-year outdoor life, with reduction in tensile and flexural strength not more than 15 per cent. Type test to be provided along with tender, All GRP Material of Poles comply to Technical Specification as per attached Annexure-A, at page No. TS-3 of Tender Document - Buyer ATC.a. Supply of 1 meter height of pole 50 mm dia with single GRP Arm length 500mm having 50 mm diameter at 15 degree complete with Aluminium fix base plate. , Refer SoQ Item No. 20.b. Supply of Fiberglass Frangible Pole... B. 2-mtr height, 60mm dia with single GRP Arm length 500mm having 50mm dia at 15deg. complete with Al. fix baseplate. - Item No. Item No. 20.b. Supply of Fiberglass Frangible Pole of various height and diameter as details below- Fiberglass Perimeter lighting poles of various heights and diameters with Aluminium or HDG base plate as mentioned inline items and HDG foundation bolts with external Junction box and 1 nos. MCB, 4-way terminal block meeting frangibility criteria as per ICAO Technical Specification-The Fibre glass Pole material must be UV Resistant type tested as per ASTM G154 for Min. 2000 hours, Equivalent to 20-year outdoor life, with reduction in tensile and flexural strength not more than 15 per cent. Type test to be provided along with tender, All GRP Material of Poles comply to Technical Specification as per attached Annexure-A, at page No. TS-3 of Tender Document - Buyer ATC.b. Supply of 2-meter height of pole 60 mm dia with single GRP Arm length 500mm having 50 mm diameter at 15 degree complete with Aluminium fix baseplate. , Refer SoQ Item No.20.c. Supply of Fiberglass Frangible Pole. C. 3-mtr height, 100mm dia...with HDG Tiltable fix baseplate - Item No. 20.c. Supply of Fiberglass Frangible Pole of various height and diameter as details below- Fiberglass Perimeter lighting poles of various heights and diameters with Aluminium or HDG base plate as mentioned inline items and HDG foundation bolts with external Junction box and 1 nos. MCB, 4-way terminal block meeting frangibility criteria as per ICAO Technical Specification-The Fibre glass Pole material must be UV Resistant type tested as per ASTM G154 for Min. 2000 hours, Equivalent to 20-year outdoor life, with reduction in tensile and flexural strength not more than 15 per cent. Type test to be provided along with tender, All GRP Material of Poles comply to Technical Specification as per attached Annexure-A, at page No. TS-3 of Tender Document - Buyer ATC.c. Supply of 3-meter height of pole 100 mm dia with single GRP Arm length 1000 mm having 60 mm diameter at 15 degree complete with HDG Tiltable fix baseplate. , Refer SoQ Item No. 20.d. Supply of Fiberglass Frangible Pole ... D. 4-mtr height, 100mm dia with single GRP Arm length 1000mm having 60mm dia at 15 deg. complete with HDG Tiltable fix baseplate. - Item No. 20.d. Supply of Fiberglass Frangible Pole of various height and diameter as details below- Fiberglass Perimeter lighting poles of various heights and diameters with Aluminium or HDG base plate as mentioned inline items and HDG foundation bolts with external Junction box and 1 nos. MCB, 4-way terminal block meeting frangibility criteria as per ICAO Technical Specification-The Fibre glass Pole material must be UV Resistant type tested as per ASTM G154 for Min. 2000 hours, Equivalent to 20-year outdoor life, with reduction in tensile and flexural strength not more than 15 per cent. Type test to be provided along with tender, All GRP Material of Poles comply to Technical Specification as per attached Annexure-A, at page No. TS-3 of Tender Document - Buyer ATC.d. Supply of 4-meter height of pole 100 mm dia with single GRP Arm length 1000 mm having 60 mm diameter at 15 degree complete with HDG Tiltable fix baseplate. , Refer SoQ Item No. 20.e. Supply of Fiberglass Frangible Pole .... E. 5-mtr height, 100mm dia with single GRP Arm length 1000mm having 60mm dia at 15 deg. complete with HDG Tiltable fix baseplate. - Item No. 20.e. Supply of Fiberglass Frangible Pole of various height and diameter as details below- Fiberglass Perimeter lighting poles of various heights and diameters with Aluminium or HDG base plate as mentioned inline items and HDG foundation bolts with external Junction box and 1 nos. MCB, 4-way terminal block meeting frangibility criteria as per ICAO Technical Specification-The Fibre glass Pole material must be UV Resistant type tested as per ASTM G154 for Min. 2000 hours, Equivalent to 20-year outdoor life, with reduction in tensile and flexural strength not more than 15 per cent. Type test to be provided along with tender, All GRP Material of Poles comply to Technical Specification as per attached Annexure-A, at page No. TS-3 of Tender Document - Buyer ATC.e. Supply of 5-meter height of pole 100 mm dia with single GRP Arm length 1000 mm having 60 mm diameter at 15 degree complete with HDG Tiltable fix baseplate. , Refer SoQ Item No. 20.f. Supply of Fiberglass Frangible Pole.... F. 6-mtr height, 150mm dia with single GRP Arm length 1000mm having 60mm dia at 15 deg. complete with HDG Tiltable fix baseplate. - Item No. 20.f. Supply of Fiberglass Frangible Pole of various height and diameter as details below- Fiberglass Perimeter lighting poles of various heights and diameters with Aluminium or HDG base plate as mentioned inline items and HDG foundation bolts with external Junction box and 1 nos. MCB, 4-way terminal block meeting frangibility criteria as per ICAO Technical Specification-The Fibre glass Pole material must be UV Resistant type tested as per ASTM G154 for Min. 2000 hours, Equivalent to 20-year outdoor life, with reduction in tensile and flexural strength not more than 15 per cent. Type test to be provided along with tender, All GRP Material of Poles comply to Technical Specification as per attached Annexure-A, at page No. TS-3 of Tender Document - Buyer ATC.f. Supply of 6-meter height of pole 150 mm dia with single GRP Arm length 1000 mm having 60 mm diameter at 15 degree complete with HDG Tiltable fix baseplate. , Refer SoQ Item No. 20.g. Supply of Fiberglass Frangible Pole ... G. 7-mtr height, 150mm dia with single GRP Arm length 1000mm having 60mm dia at 15 deg. complete with HDG Tiltable fix baseplate. - Item No. 20.g. Supply of Fiberglass Frangible Pole of various height and diameter as details below- Fiberglass Perimeter lighting poles of various heights and diameters with Aluminium or HDG base plate as mentioned inline items and HDG foundation bolts with external Junction box and 1 nos. MCB, 4-way terminal block meeting frangibility criteria as per ICAO Technical Specification-The Fibre glass Pole material must be UV Resistant type tested as per ASTM G154 for Min. 2000 hours, Equivalent to 20-year outdoor life, with reduction in tensile and flexural strength not more than 15 per cent. Type test to be provided along with tender, All GRP Material of Poles comply to Technical Specification as per attached Annexure-A, at page No. TS-3 of Tender Document - Buyer ATC.g. Supply of 7-meter height of pole 150 mm dia with single GRP Arm length 1000 mm having 60 mm diameter at 15 degree complete with HDG Tiltable fix baseplate. , Refer SoQ Item No. 21. Supplying and making straight through joint with heat shrinkable kit. - Item No. 21. Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed, XLPE aluminium conductor cable of 1.1 KV grade as required. , Refer SoQ Item No. 22. Erection of metallic or FRP pole in cement concrete. - Item No. 22. Erection of metallic or FRP pole in cement concrete 1 isto 3 isto 6, 1 cement, 3 coarse sand, 6 graded stone aggregate 40 mm nominal size foundation including excavation and refilling etc. with HDG Tiltable fix baseplate as required. Total Quantity : 51816
|
