Tenders Are Invited For Construction Of Two Pumptruck Bicycle Tracks With Accompanying Infrastructure As Par ... in Poland

Work Detail

1. The Subject Of The Order Is The Construction Of Two Pumptruck Bicycle Tracks With Accompanying Infrastructure Consisting Of The Construction Of Two Pumptruck Bicycle Tracks: For Beginners (Mini Pump) And Intermediate (Easy Pump) And A Relaxation Area. 2. The Area Where The Subject Of The Order Is To Be Performed Is Located On The Southern Part Of Plot No. 869 Rev. 0010 (City Of Słupsk). The Plot Is Located In The North-Western Part Of The City, Between 11 Listopada And Frąckowskiego Streets In Słupsk.3. The Subject Of The Order Includes: Construction Of A Pumptruck Track: For Beginners (Mini Pump); Construction Of A Pumptruck Track: Intermediate Level (Easy Pump); Greenery Development; ​​Elements Of Small Architecture, I.E. • Concrete Benches Without Backrests; • Street Bins; • Metal Bicycle Racks; • Information Boards.4. Track Parameters: Easy Pump Track Parameters: - Track Area (Along The Slope Contour): 1180.0 M2, - Asphalt Surface In Projection: 509.0 M2, - Track Length In Projection: 267.0 M, - Width Of Track Surface: Min. 1.7 M, - Height Of Profiled Turns Of The Pumptrack Track (Measured From The Asphalt Surface At The Lowest Point Of The Track To The Asphalt Surface At The Top Of The Track): 1.0 M, - Asphalt Layer Thickness: 5-7 Cm.  Number Of Profiled Bends: 7 Pcs.  Radius Of Bends: Min. 3.8 M. Parameters Of The Mini Pump Track: - Track Area (Along The Slope Contour): 366.0 M2, - Asphalt Surface In Projection: 126.0 M2, - Track Length In Projection: 71.0 M, - Width Of Track Surface: Min. 1.5 M,  Height Of Profiled Turns Of The Pumptrack Track (Measured From The Asphalt Surface At The Lowest Point Of The Track To The Asphalt Surface At The Top Of The Track)  0.5 M, - Number Of Profiled Turns: 4 Pieces,  Radius Of Turns: 3.0 M. Easy Pump And Mini Pump Tracks Are Intended To Enable Riding On Skateboards, Roller Skates Or Scooters.5. Greenery – Finishing The Pumptrack Slopes With Rolled Grass. The Soil Should Be Cleaned Of All Impurities And Weeds, It Should Be Dug Or Plowed, And It Should Be Enriched With Mineral Fertilizers.6. Accompanying Works: Removal Of A 20 Cm Layer Of Topsoil To Connect The Embankment Layers, V = 9.10 M3, Earthworks Related To The Construction Of Embankments Of The Bicycle Track. Mineral And Sandy Soil (Frost-Resistant) With A Volume Of 991.70 M3 Is Planned To Be Obtained From Sources Other Than Excavations On The Construction Site, - Profiling And Testing Of The Shaped Course Of The Bicycle Track, - Laying And Compacting The Foundation Layer Of Crushed Aggregate Fraction 0-31.5 Mm Thick. 10 Cm, - Laying The Track Surface With Ac 8S Asphalt Concrete, 5-7 Cm Thick, - In Accordance With The Attached Drawings Pt-Sł-01 And Pt-Sł-03, Replace The Surface With A Gravel One In Places In The Middle Of The Track, Manufacturing And Installation (Assembly) Of 1 (One) Board - In Accordance With The Design Drawing, Annex No. 14 And The Proposed Content According To The Design Graphic Attachment No. 15 (Note The Attachme

Contact Information