Request For Quotation Purchase Of Goods For Equipment And Consumables in Kazakhstan

Work Detail

Active Cooling System For A Single-Board Microcomputer. Device Type: Active Cooling System (Radiator With Fan). Cooling Type: Combined Cooling Aluminum Radiator + Fan. Radiator Material: Aluminum. Fan: Type: Axial Fan Speed Control: Pwm Connection Interface: 4-Pin Fan Connector. Fan Supply Voltage: 5 V. Compatibility: The Cooling System Must Be Compatible With Single-Board Microcomputers That Have: Standard Mounting Holes For The Cooler; 4-Pin Fan Connector; Central Processor With Active Heat Dissipation. Design Compact Aluminum Heatsink Top-Mounted Fan Mounting Stands Or Hardware Pre-Applied Thermal Pad Or Thermal Paste Additional Features Automatic Fan Speed Control Low Noise Level Effective Cpu Cooling Under Heavy Load., Dc-Dc Step-Down Voltage Converter. Device Type: Dc-Dc Step-Down Converter (Dc-Dc Step-Down), Conversion Type: Pulse Voltage Converter. Electrical Parameters: Input Voltage: 6–24 V Dc. Output Voltage: 5 V Dc. Output Current: No Less Than 5 A. Maximum Output Power: No Less Than 25 W Conversion Efficiency: No Less Than 90%. Design: Installation Type: Module On A Printed Circuit Board. Cooling System: Passive Cooling Or Radiator. Connections: Power Input Vin+ / Vin- Power Output Vout+ / Vout-. Additional Characteristics: Overload Protection, Short Circuit Protection, Overheating Protection, Stable Output Voltage., Thermal Paste. Density: 2.50 G/Cm³. Viscosity: 31,600 Wt. Volume Resistivity: 3.8 X 10¹³ Ohm Cm. Continuous Use Temperature: -50~150°C. Color: Gray Packaging: Width: 187 Mm Height: 15 Mm Length: 82 Mm Weight: 0.011 Kg. Features: Qr Code To Verify Authenticity., Relay Module For Single Board Microcomputer. Device Type: Relay Load Control Module. Number Of Channels: At Least 1 Channel. Relay Type: Electromechanical. Module Supply Voltage: 5 V Dc. Control Signal Type: Digital Signal From The Gpio Interface Of A Single-Board Microcomputer. Logic Level Compatibility: 3.3 V/5 V. Switching Load: Maximum Ac Voltage: Up To 250 V Ac. Maximum Load Current: Not Less Than 10 A. Maximum Dc Voltage: Up To 30 V Dc. Connection Interfaces: Control Connector: Vcc - 5 V Power Supply Gnd - Common Wire In - Control Signal Input (Gpio) Load Switching Connector: No - Normally Open Contact Com - Common Contact Nc - Normally Closed Contact Design Printed Circuit Board Installed Electromechanical Relay Led Status Indicator Screw Terminals For Connecting The Load Mounting Holes For Fastening., Usb-C Power Supply For Single Board Microcomputer. Main Characteristics: Device Type: Ac Power Adapter. Maximum Output Power: No Less Than 27 W. Output Connector Type: Usb Type-C. Power Technology Support: Usb Power Delivery (Pd). Output Power Modes: 5.1 V/5 A (Main Power Mode Of A Single-Board Microcomputer) 9 V/3 A 12 V/2.25 A 15 V/1.8 A. Input Parameters Input Voltage: 100–240 V Ac Network Frequency: 50–60 Hz. Design Built-In Usb-C Cable Cable Length: About 1.2 M Cable Cross-Section: At Least 18 Awg Compact Network Adapter Housing. Protection Short Circuit Protection Overload Protection Overheat Protection., Touch Lcd Display. Ips Lcd Screen Diagonal: 10.1 Inches. Screen Resolution: At Least 1280 × 800 Pixels. Aspect Ratio: 16:10. Viewing Angle: Up To 178°. Touch Panel Type: Capacitive Touch Screen. Number Of Touch Points: At Least 5 Touch Points. Connection Interfaces Hdmi - For Video Signal Transmission Usb - For Touch Panel Data Transmission Power Supply Via Usb (5 V). Support Input Resolution: Up To 1920×1080 (Full Hd) Via Hdmi. Additional Characteristics: Adjustable Backlight Brightness; Support For Plug-And-Play Technology; Mounting Holes For Mounting; Ability To Integrate With Single-Board Computers. Compatibility: The Display Must Support Work With: Single-Board Microcomputers Personal Computers Operating Systems Linux, Windows And Similar Platforms. Power Supply Voltage: 5 V Power Consumption: About 5 W. Overall Dimensions Width: About 240 Mm Height: About 157 Mm Thickness: About 12 Mm., Expansion Card For Connecting An Nvme Drive (M.2). Device Type: Expansion Board For Single-Board Microcomputer. Form Factor Hat Expansion Module Pci Express Connection Interface. Number Of Pcie X1 Interface Lines (Gen2 / Gen3). Supported Nvme Drive Protocol. Drive Support: Drive Type Solid State Drive Ssd. Form Factor M.2. Key Type M-Key. Supported Drive Sizes M.2 2230 M.2 2242 M.2 2260 M.2 2280. Support For Booting The System From Ssd; Booting The System From An Nvme Drive Is Supported. Network Capabilities: Supports Power Over Ethernet (Poe) Technology. Network Standard Ieee 802.3Af / Ieee 802.3At. Input Voltage Poe 37 – 57 V Dc. Power: Output Supply Voltage 5 V To 4.5 A (Gpio) 12 V To 2 A (Optional Connector). Interfaces M.2 M-Key Slot For Nvme Ssd 16-Pin Pcie Ffc Connector For Connecting To A Microcomputer 40-Pin Gpio Stackable Header Led Power And Activity Indicators. Cooling System Metal Radiator Active Cooling Fan Thermal Pads For Heat Dissipation. Overall Dimensions Length: 56.5 Mm Width: 70 Mm Height: About 15 Mm. Contents: Pcie-M.2 Expansion Card, Flexible Pcie Cable, Cooling Radiator, Thermal Pads, Set Of Mounting Screws.

Contact Information