|
Spinal Needle With A Pencil Point Tip Complete With An Introducer. (27G - Length 90 Mm) The Main Technical Characteristics Of A 27G Spinal Needle With An Introducer: 27G, Pencil Point Tip Type, Whitacre Modification, Outer Diameter 0.40Mm, Working Part Length No Less Than 90Mm, Tip Sharpening Angle 29+20, Internal Needle Diameter No Less Than 0.28Mm And No More 0.30 Mm With Chemical Polishing Of The Internal Channel, To Ensure The Rapid Appearance Of Reverse Flow Of Cerebrospinal Fluid During Puncture (The Speed Of Passage Of The Test Solution Is Not Less Than 22 Mm/S^Dd) And Low Resistance When Introducing A Local Anesthetic. The Distance From The Tip Of The Needle To The Side Hole Is 1.20 Mm, In Order To Ensure Greater Strength Of The Needle Tip And Prevent Its Deformation In Case Of Accidental Contact With The Bone, The Length Of The Side Hole (Along The Inner Edges) Is No More Than 0.60 Mm To Prevent The Simultaneous Introduction Of Anesthetic Into Both The Subarachnoid And Epidural Spaces And The Development Of A Partial Block. The Thickness Of The Needle Under The Edge Of The Side Hole Is At Least 0.30 Mm To Maintain The Rigidity Of The Needle, Prevent Accidental Capture And Transfer Of Tissue Into The Subarachnoid Space, And Prevent Rupture Of The Fibers Of The Dura Mater By The Edges Of The Hole. The Needle Pavilion Is Transparent, With A Prism For Early Identification Of Spinal Fluid. Color Coding Of The Needle Mandrel Is Gray; Introducer 20G, Outer Diameter 0.9Mm, Working Part Length 37Mm, Introducer Pavilion Corresponds To The Base Of The Spinal Needle, Increasing Its Effective Length. Protective Plastic Tubing Covering The Metal Parts Of The Needle And Sheath For Safe Disposal. Sterile Packaging, Ethylene Oxide Sterilization. A Spinal Needle With An Introducer Is Intended To Perform A Puncture Of The Subarachnoid Space For Spinal Anesthesia Or For Diagnostic Purposes., Set For Epidural Anesthesia With A Fixator, Tuohy Needle 18G, The Kit Includes: Tuohy Epidural Needle 18G, Outer Diameter 1.3Mm, Inner Diameter 1.0Mm, Working Part Length 80Mm, Total Length 105Mm, Color Marking Of The Pavilion, Stop Wings And Mandrel Tip - Blue, Etched Marking On The Needle At A Level Of 3Cm, Then Every 1Cm. Removable Wings. The Presence On The Wings Of Semicircular Recesses For Emphasis With Fingertips And An Orientation Mark That Coincides With The Bend Of The Needle. The Presence Of Indelible (Embossed) Markings Of The Needle Size On The Mandrel. A Plastic Mandrel, The Cut Of Which Exactly Matches The Cut Of The Distal End Of The Needle. A Protective Tube On The Needle That Completely Covers The Metal Part. Epidural Catheter 20G For An 18G Needle, Closed Tip, 3 Lateral Holes, At A Distance Of 15Mm, 11Mm, 7Mm From The Closed Tip Of The Catheter, Arranged In A Spiral, Outer Diameter 0.83Mm, Inner Diameter 0.45Mm, Length 915Mm, Material Hardness 60 Units. According To Shore, Color Marking Of Tip And Length From 50 To 150 Mm Every 10 Mm And 200 Mm Counting From The Tip, Filling Volume 0.19 Ml. Label With The Indication “Epidural” For The Catheter. Guide For Catheter With Male Luer Lock. “Loss Of Resistance” Syringe, Three-Component, Used Volume 10 Ml; Internal Diameter Of The Cylinder Is 15.15 Mm; The Diameter Of The Piston Tip Is 14.99 Mm, The Inscription On The Syringe Indicates That The Syringe Is Used For The “Loss Of Resistance” Technique. The Color Of The Syringe Is Blue. Epidural Filter With A Pore Diameter Of 0.2 Microns, Provides Bidirectional Filtration; Filling Volume 0.75 Ml; Maximum Filtration Pressure 1793 Kpa^D/D^; Filter Material – Polyethersulfone, Luer Lock, Male Type On One Side And Female On The Other With The Possibility Of Additional Fixation Using Internal Threads If There Is An External Thread On The Mating Part. Possibility To Rotate 360 Degrees After Connection. The Profile At The Highest Part Is 11Mm. Diameter 34Mm. Maximum Service Life 96 Hours., The Violet Synthetic Absorbable Surgical Suture Consists Of A Homopolymer Glycolic Acid Coated With Epsilon-Caprolactone And A Fatty Acid Ester. The Coating Ensures Easy Sliding And Non-Traumatic Passage Through Tissue. The Thread Is Non-Collagenous, Pyrogen-Free And Has No Antigenic Properties. Atraumatic Needles Made Of High-Strength, Elastic Grade 300 Stainless Steel With A Silicone Coating That Improves Penetration. Stabilization Of The Seam Is 28-35 Days, Complete Absorption Is 60-90 Days Due To Hydrolysis. The Thread Retains 65% Of Its Original Tensile Strength After Two Weeks After Implantation And 40% After Three Weeks. Usp 0 (M3.5), Ø 0.35-0.399 Mm, Length Cm: 90 Cm, With Atraumatic Stabbing Needle Mm: 40.0, Curvature 1/2 Circle. The Thread Is Sterilized With Ethylene Oxide. Onepack Packaging Ensures Tightness And Sterility For 5 Years From The Date Of Manufacture. Features Of Opening The Package Provide Easy Access To The Needle. The Front Side Of The Box And Individual Packaging Has Easily Identifiable Inscriptions. Availability Of A Registration Certificate, A Certificate Of Product Conformity., The Violet Synthetic Absorbable Surgical Suture Consists Of A Homopolymer Of Aglycolic Acid Coated With Epsilon-Caprolactone And A Fatty Acid Ester. The Coating Ensures Easy Sliding And Non-Traumatic Passage Through Tissue. The Coating System And Threads Are Non-Collagenous, Pyrogen-Free And Non-Antigenic. Atraumatic Needles Made Of High-Strength, Elastic Grade 300 Stainless Steel With A Silicone Coating That Improves Penetration. Stabilization Of The Seam Is 28-35 Days, Complete Absorption Is 60-90 Days Due To Hydrolysis. The Thread Retains 65% Of Its Original Tensile Strength After Two Weeks After Implantation And 40% After Three Weeks. Usp 2 (M5), Ø 0.50-0.599 Mm, Length 90 Cm, With Atraumatic Stabbing Needle, Length 48.0 Mm, Curvature ½ Circle. The Thread Is Sterilized With Ethylene Oxide. Individual Packaging Of Each Thread Ensures Tightness And Sterility For 5 Years From The Date Of Manufacture. Features Of Opening The Package Provide Easy Access To The Needle. The Front Side Of The Box And Individual Packaging Has Easily Identifiable Inscriptions. Availability Of A Registration Certificate, A Certificate Of Product Conformity.
|
