|
Bids Are invited for CARRIAGE OF 11/9 /8.5 MTR.PCC/ ST POLE FROM ESC HASARI TO DIFFERENT CONSUMER WORK SIDE. , CARRIAGE OF LINE MATERIAL VIZ. CONDUCTOR ,11 KV XLPE CABLE,AB CABLE, STAY ROD, EARTHING ROD, G I WIRE, STAY WIRE AND OTHER LINE MATERIAL. , ERRECTION OF 11/9 MTR. PCC/ST POLE POLE WITH FIXING OF ALL ACCESSORIES INCLUDING ITS GRAUTING , ERECTION AND GRAUTING OF DOUBLE POLE STRUCTURE WITH COMPLITE FITTING OF ALL ACCESSORIES. , ERECTION OF TRI-POLE STRUCTURE WITH FIXING OF ALL ACCESSORIES INCLUDING CONCRETING OF POLES. , ERECTION OF FOUR -POLE STRUCTURE WITH FIXING OF ALL ACCESSORIES INCLUDING CONCRETING OF POLES. , CONSTRUCTION OF 11/.04/1O/25/63/100 KVA SUB. STATION DOUBLE POLE STRUCTURE COMPLITE INCLUDING THE FITTING OF ALL ACCESSORIES. , CARRIAGE OF 250/400 KVA TRASNFORMER FROM E.S.C.HASARI TO WORK SITE . , CARRIAGE OF 1O/16/25/63/100 KVA TRANSFORMER FROM E.S.C.HASARI TO WORK SITE . , THE WORK OF PROPER PLACEMENT OF TRANSFORMER ON DOUBLE POLE / TRANSFORMER PLINTH. , DRILLING OF HOLE ON 11 KV X - ARM , TOP CHANNLE ,T-OFF,DROPER CHANNLE AND OTHER ACCESSORIES INCLUDING THE WORK OF ITS CARRIGE . , FIXING OF EARTHING ROD COMPLITE. , ERRECTION AND GRAUTING OF STEY SET COMPLITE AS PER RESPO. , PIT DIGGING OF HARD ROCKY/ DAMMAR/ RCC SURFACE ETC. , PAINTING OF 11 KV 11 MTR LONG STP WITH RED OXIDE/ SILVER OXIDE PAINT INCLUDING THE COST OF MATERIAL. , ERRECTION OF 11KV LINE FROM EXISTING 11KV LINE TO NEW CONSTRUCTED DOUBLE /SINGLE POLE STRUCTURE AT DIFFERENT PLACES. , FIXING OF DANGER BOARD. , LAYING /FIXING OF LT P.V.C.CABLE INCLUDING THE WORK OF CRIMPING OF LUGS AND CONNECTION TO TANSFORMER /LINE. , GUARDING OF 11KV LINE WITH G.I WIRE,ANGLE AND NUT BOLT ETC. AS PER RESPO. , LAYING OF ACSR WEASEL / RABIT CONDUCTOR INCLUDING ITS SAGGING, STRINGING , BINDING AND JUMPRING ETC. , LAYING OF ACSR RECOON/ DOG CONDUCTOR INCLUDING ITS SAGGING, STRINGING , BINDING AND JUMPRING ETC. , LAYING OF AB CABLE OF SIZE 3X50/95/120 SQMM ON POLE . , INSTALLATION OF LT DISTRIBUTION BOX 3PH.ON POLE. , GIVING THE CONNECTION THROUGH INSTALLED DISTRIBUTION BOX . , CARRIAGE OF 11 KV MEETRING CUBICAL 10/5A,15/5A,20/5A AND AVOBEFROM ESC HASARI TO DIFFERENT CONSUMER WORK SITE. , LAYING OF 11 KV XLPE CABLE OF SIZE 3X25/35/70/120 SQMM ON POLE WITH THE HELP OF GI WIRE &UNDER THE SURFACE /CABLE TRINCH. , DIGGING OF CABLE TRENCH FOR LAYING OF 11 KV CABLE WITH FIXING OF HDPE/GI PIPE (AS PER NEED) AND CABLE ROUTE MARKER ALSO COMPLETE. , HORIZONTAL BORING WITH THE HELP HDD MACHINE FOR ROAD CROSSING ETC. , INSTALLATION OF 11 KV MEETRING CUBICAL 10/5A,15/5A,20/5A AND AVOBE TO DIFFERENT CONSUMER WORK SITE.INCLUDING ITSGRAUTING. , FIXING /MOUNTNING OF 11 KV TERMINATION KIT OF SIZE 3X25/35/70/120 SQMM . , CONNECTION THE CABLE THROUGH MEETRING CUBICAL AND DOUBLE POLE. , CONSTRUCTION OF TRANFORMER PLINTH OF SIZE-5X5X4 FEET AS PER DIRECTION OF THE ENGINEER. WITH THE HELP OF BRIC,RIVER SAND & STONE BLAST INCLUDES THE COST OF LABOUR ,T&P PROVIDED BY THE CONTRACTOR FOR PROPER COMPLETION OF WORK. , SUPLLY & FIXING OF WIRE MESS FENSHING (10X10 = 40 RFT.) , FABRICATION AND FIXING OF SPECIAL TYPE H BRACKET MADE OF 100X50X5 MS CHANLE AND 50X50X5 MS ANGLE WITH NUT BOLT & CLAMPS ETC. , EARTHING OF DISTRIBUTION TRANSFORMER BY CAMICAL EARTHING G.I. ELECRODE OF B GRADE, COMPLETE TO THE REQUIRMENT OF I.S.SPECIFICATION . ITS INCLUDE THE COST OF ALL MATERIAL, LABOUR, T&P PROVIDED BY THE CONTRACTOR FOR PROPER COMPLETION OF WORK. , DISMENTLING OF OLD DAMAGE POLE DUE TO ERRECTED NEW POLE FROM DIFFRENT WORK SITE. , TREE CHOPING , ????? ????? ??? ????? ?? ??????? ????????? ????? ???? / ????? ???? / ?????? ???? ?? ????? ????????? ??????? ?? ???? ??? ???? ?????????? ?? ????????? ???? ???? ???? ?? ??? ?? ??????? ???? ????? (3 x 2) ?? ?????? ????? ??? ????? ?? ??????? ???? ???? ????? , FIXING OF 11 KV HEAT SHIRINK CABLE JOINTING KIT OF SIZE 3X70/120SQMM , FIXING OF GI PIPE 6 DIA , Fixing OF HDPE PIPE (PE63, 10KG/CM3, IS 4984:1995) 6 DIA OR EQUIVALENT
|
