Tender for K R PETE TALUK BRANCH INTERIOR WORK in India

Work Detail

K R Pete Taluk Branch Interior Work - Providing And Fixing 1 Mm Thick M.S. Sheet Sliding-Shutters, With Frame And Diagonal Braces Of 40X40x6 Mm Angle Iron, 3 Mm M.S. Gusset Plates At The Junctions And Corners, 25 Mm Dia Pulley, 40X40x6 Mm Angle And T- Iron Guide At The Top And Bottom Respectively, Including Applying A Priming Coat Of Approved Steel Primer Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The Engineer-In-Charge.,Customer Stain Less Steel Bench 3 Seater As Per Specifications And As Per Directions Of The Engineer-In-Charge.,Providing , Fitting , Fixing Writing Plat Form At A Height Of 4Ftabove Floor Level Fixed To The Wall Made Out Of 19 Mm Bwp Block Board With Lamination 1 Mm Tk On Top & Hard Wood Beading Ducco Painted . At Least 10 Nos Vertical Slip In Chalan Shelfs Attached To Wall Over Writing Platform Made Out Of Min 4 Mm Tk Acrylic Sheets With 6 Mm Tk Ply Back Up. Each Chalan Shelf Will Be Of Size 6Inch Height , 6Inch Wide .The Entire Unit Will Be Complete In All Respect Including Materials ,Labor Etc,Providing And Fixing Double Glazed Hermetically Sealed Glazing In Aluminium Windows, Ventilators And Partition Etc. With 6 Mm Thick Clear Float Glass Both Side, Having 12 Mm Air Gap, Including Providing Epdm Gasket, Perforated Aluminium Spacers, Desiccants, Sealant (Both Primary And Secondary Sealant) Etc. As Per Specifications, Drawings And Direction Of Engineer-In-Charge Complete Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And With Bank Logo,Providing Modular Working Counter Size 5 Ftx3ftx2ft-6Inch, And Provide 12 Mm Thick Glass In Front Face Of The Table And Both Side 40 Mm Thick Ply Partition , Provide Single Side Drawer Unit As Per Drawing Details Slides On Telescopic Slider Made Up Of 20Mm Th.Ply With Locking Arrangement. The Table Surfaces Are To Be Finished With 1.0Mm Th.Laminates As Per Design Of Approved Shade And Top Of The Table Covered By 20 Mm Granite With Approved Design And The Work Should Be Completed Including All,Providing Modular Cashier Table Size 5 Ftx3ftx2ft-6Inch, , And 1Ft .6Inch H Ply Partition Provided In Front Face Of The Table Both Side Provide Drawer Unit As Per Drawing Details Slides On Telescopic Slider Made Up Of 20Mm Th.Ply With Locking Arrangement. The Table Surfaces Are To Be Finished With 1.0Mm Th.Laminates As Per Design Of Approved Shade And Top Of The Table Covered By 20 Mm Granite With Approved Design And The Work Should Be Completed Including All Labour And Material.,Providing Modular Executive Type Manager Table Size 5 Ftx3ftx2ft-6Inch, Both Side Provide Drawer Unit As Per Drawing Details Slides On Telescopic Slider Made Up Of 20Mm Th.Ply With Locking Arrangement. The Table Surfaces Are To Be Finished With 1.0Mm Th.Laminates As Per Design Of Approved Shade And Top Of The Table Covered By 20 Mm Granite With Approved Design And The Work Should Be Completed Including All Labour And Material.

Contact Information