|
Centrifugal Injection Type Water Pump. Equipment Composed Of An Electric Motor With A Power Of 1.0 Hp, Operating At A Frequency Of 60 Hz, With A Thermal Protection System (Thermostat) And A Permanent Capacitor, Ensuring Greater Safety And Durability. Electrical Supply In Single-Phase Voltage Compatible With 127 V Or 220 V. Hydraulic Body (Snail) Made Of High Resistance Cast Iron, With Input And Output Connections With Standard Bsp Thread. Closed Type Rotor, Made Of High Mechanical Resistance Thermoplastic Material, Reinforced With Fiber, Suitable For Continuous Operation. Sealing System By Mechanical Seal, Consisting Of Materials Resistant To Corrosion And Wear, Such As Stainless Steel, Graphite And Ceramics. Injector System Composed Of A Resistant Metallic Body, Foot Valve With Metallic Screen, Venturi In Thermoplastic Material And Highly Durable Injector Nozzle, Suitable For Operation In Deep Suction Systems. Easy To Install, Operate And Maintain Equipment, Suitable For Applications In Homes, Farms, Small Irrigation Systems And Water Supply In General. For Submergences Of Less Than 10 Meters, Consider An Average Decrease In Flow Of 7% For Injector I 0 And 6% For Injector 1, For Each Meter Less, Taking As A Reference The Flow Values For The Submergence Of 10 Meters., Pneumatic Grease Thruster With 20 Kg Bucket, With Wheels, Type Bremen 85963 Or Equivalent, Or Higher, Intended For The Application Of Grease Under High Pressure, Suitable For Professional Use In Automotive, Industrial, Agricultural And Fleet Maintenance Activities, Being Designed For Continuous Operation, Providing Efficient, Precise And Waste-Free Lubrication, Even In Difficult To Access Points. It Must Have A High-Performance Pneumatic System, With A Minimum Ratio Of 50:1, A Minimum Flow Rate Of 850 G/Min And A Minimum Output Pressure Of 300 Bar (Approximately 4,350 Psi), Ensuring High Application Power, With A Maximum Compressed Air Consumption Of 7 Pcm And A Working Pressure Between 6 And 8 Bar. The Equipment Must Be Compatible With 20 Kg Steel Grease Bucket, Must Have A Mobile Structure With Wheels To Facilitate Transport, As Well As Come With A Sae100 R1at Standard High-Resistance Hose With A Minimum Of 2.5 Meters In Length, 1/4 Input And Output Connections, And Support Operation In An Approximate Temperature Range Of -20°C To 120°C. It Must Feature, At A Minimum, A High-Efficiency, High-Pressure Pneumatic System For Demanding Applications, A Minimum Flow Rate Of 850 G/Min, A Maximum Air Consumption Of 7 Pcm, A Structure With Wheels For Mobility And A Reinforced Hose Measuring At Least 2.5 Meters. As Minimum Technical Specifications, It Must Meet The Following Parameters: Grease Application, Minimum Ratio Of 50:1, Working Pressure Of 6 To 8 Bar (87 To 116 Psi), Minimum Output Pressure Of 300 Bar (Approximately 4,350 Psi), Bucket Capacity Of 20 Kg, 1/4 Connections, Temperature Of Operation Between -20°C And 120°C And Standard Sae100 R1at Hose With A Minimum Length Of 2.5 Meters. The Equipment Must Be Supplied With The Following Accessories: 01 Complete Pneumatic Propeller, 01 Metal Bucket With Lid With A Capacity Of 20 Kg, 01 Follower Disc, 01 Grease Control Valve And 01 Z Girat Type Connection
|
