|
Implement For Agricultural Tractor Of Drag Type With At Least 24 Discs Of 28 And 7.5 Mm Thick, Also Containing Remote Control, Oscillating Bearing, Spacing Between Discs Of 270 Mm And Minimum Total Weight Of 2,700 Kg, The Implement Must Have 4 Axles With 6 Discs Each (Description A), Implement For Tractor Agricultural 9-Rod Scarifier Type With Automatic Trip And Reset And Simple Unclogging Roller (Description B), Implement For Agricultural Tractor Of Shredder Type Containing Rotor With Hammers With Tdi Treatment, Set Of Pulleys With 5 Ways And Powerband Belts, Rear Cover Opening And Rear Compactor Roller With Cleaner, Hydraulic Lateral Displacement Of No. Minimum 30Cm. Approximate Width 1,800Mm, Approximate Length 1,150Mm, Approximate Height 900Mm, Approximate Weight 600Kg, Minimum Cutting Perimeter 1,600Mm, Required Tractor Power 60Hp (Description C), Rear Cover Opening And Rear Compactor Roller With Cleaner. Approximate Width 2,600Mm, Approximate Weight 850Kg, Minimum Cutting Perimeter 2,400Mm, Required Tractor Power 80Hp (Description D), Knife Roller Type Agricultural Tractor Implement, Articulated, Chassis With 3 Joints, 3 Independent Rollers, With Central Articulation System, Self Transportable, With Opening And Hydraulic Closing, Working Width Of At Least 8.9 Meters And Length Of 8.3 Meters, Height Of Approximately 1.6 Meters And Minimum Weight Of 5,250Kg. Each Roll With A Minimum Measurement Of 3 Meters, Ballasting System With Separate Chambers With A Minimum Capacity Of 930 Liters Of Water Each, 126 Cutting Knives, In Hardox 500 90Mm Steel, Reversible, Sharpened On One Side And The Other Side Without Cord And Fixed To The Roll With A Minimum Of 7 Screws Per Knife. Required Tractor Power 140Hp. Main Chassis In Square Steel Of At Least 140Mm And Minimum Thickness Of 6.35Mm, Surface Treatment With Shot Blasting In Accordance With Standards Iso 8501-1 As 21/2. Electrostatic Epoxy Powder Painting. Transport System Consisting Of At Least 4 Wheels With High Flotation Tires (Descriptive Memorandum E), 04/15/2026 - 17:15:54, Debris Grab Kit For Backhoe Loader Shell, Containing Two 5T Hydraulic Pistons, Hoses For Installation, Adapters, Electric Flow Selector Valve, Pins, Nuts And All The Necessary Material For Installation On A John Deere 310L Backhoe Loader. The Third Hydraulic Function Must Work On The Shoe Handle, With Function Change Via An Electrical System With A Button In The Cabin. All Components Necessary For Installation Must Be Supplied With The Equipment, Including A Step-By-Step Installation Guidance Manual, And Technical Support Contact Information For Questions During Installation. The Grille Must Be Made Of 1020 Ch 9.53Mm Steel And Tubes 76 And 50 With A 5Mm Wall, The Edge Clamp In 1020 Ch 12.7Mm Steel. Length Of The Kit Installed In The Shell Between 1800 And 1900Mm, Height Of The Kit Installed In The Shell Between 950 And 1000Mm (Description F)
|
