|
School Chair – With Clipboard On The Right Side, Made Of Thermoplastic Resin, Capable Of Holding The Entire Sheet Of A4 Paper Horizontally/Vertically, Measuring A Minimum: 0.55 Length Seat, Back And Board Made Of Polypropylene (Pp), Using The Thermoplastic Injection System, With A Date On The Bottom Of The Seat And Below The Board Containing The Date Of Manufacture, Locking Done By Screws. Backrest, Seat And Board Finishes: Rounded And In Polypropylene (Pp). Structure Made Of Steel. Tube Closing Tips: Made Of Polypropylene And Fitted Into The Structure. It Has 16 Ventilation Holes In The Seat And 16 In The Back. Load Capacity: 120 Kg; -Minimum Backrest Width: 46 Cm; -Minimum Backrest Height: 27 Cm; - Minimum Seat Width: 45 Cm; - Minimum Seat Depth: 41 Cm; - Book Holder: Metal Or Polypropylene. - In Accordance With The Specifications Contained In The Terms Of Reference, Childrens Trapeze Set - (Comprising 06 Tables With Book Holders, 06 Chairs And 01 Central Table). Trapezoid-Shaped Table, Enabling The Formation Of Circles With 6 Tables; 06 Chairs And A Central Table, For Collective And Individual Use, Table Top Made Of Thermoplastic Resin With Minimum Measurements: 550Mm Chair With Seat And Back Manufactured Using Thermoplastic Resin Injection Process, Ensuring Durability And Resistance, Has A Premium Finish, In Addition, Seat With Minimum Measurements: 330Mm X 300Mm Depth, Seat/Floor Height Approximately 349Mm, Fixed By Screws. Backrest With Minimum Measurements: 330Mm 390Mmx390mm. With Date Date On The Bottom Of The Seat, Top, Book Holder And Central Table Containing Date Of Manufacture. Non-Slip Shoes Involving The Ends Of The Tubes That Make Up The Feet, Performing The Function Of Protecting The Paintwork And Preventing Rust, Injected In Thermoplastic Resin, Virgin Polypropylene And Attached To The Structure Using Snap Rivets Or Screws. - Wide Participation Up To 75% - In Accordance With The Specifications Contained In The Terms Of Reference, Virgin Polypropylene Is Attached To The Structure Using Snap Rivets Or Screws. - Reserved Me And Epp Quota Of Up To 25% - According To The Specifications Contained In The Terms Of Reference, Table And Chair Set For Teacher - Table With Mdf/Mdp Top 18Mm In Crystal Gray Measuring 1200Mm Front Panel Made Of 15 Mm Mdp, Covered In Melamine Laminate Finished With Edge Tape, Fixed To The Structure Using 4 Screws. Top Base Formed By 30X20mm Metalon Steel Tube, With A Minimum Thickness Of 1.2Mm, Side Vertical Columns And Base In 30X50mm Metalon Tubes With A Minimum Thickness Of 1.2Mm. Polypropylene Shoes Wrapping The Ends Of The Tubes, Performing The Paint Protection Function, Increasing Durability, Chair With Seat And Back In Polypropylene Thermoplastic Resin. Seat
|
