Bids Are Invited For Acquisition Of Computer Equipment, Installation Of Drywall Walls And Monitoring Cameras ... in Brazil

Work Detail

Access Point Wi-Fi 6 Outdoor With Poe (Eap610-Outdoor) - Minimum Requirements: -Wi-Fi 6 Standard (Ieee 802.11Ax), Or Higher (Wi-Fi 6E / Wi-Fi 7) -Backward Compatibility With 802.11A/B/G/N/Ac -Simultaneous Operation In Dual Band 2, 4 Ghz And 5 Ghz, Or Tri-Band -Minimum Aggregate Data Rate: 1.8 Gbps -Mu-Mimo Technology Minimum 2X2, Or Higher -Ofdma Support (Uplink And Downlink) -Support Bss Coloring For Interference Reduction -Twt (Target Wake Time) Support -Outdoor Use, For Wall Or Pole Installation -Omnidirectional Integrated Antennas Or Directional -Led Status Indicator -Comes With Fixing Kit Compatible With The Type Of Installation Offered (Wall Bracket Or Pole Clamp) -Solar Protector (Sunshield) Integrated Or Included In The Fixing Kit -Powered Exclusively Via Poe, Ieee Standard 802.3Af (15.4 W), Or Higher (802.3At / 802.3Bt) -Minimum 1 (One) Rj-45 Gigabit Port (10/100/1000 Mbps) Uplink With Poe Power -Vlan Support (802.1Q) -Minimum Environmental Protection Degree Ip67, Resistant To Water Jets In Any Direction And Total Protection Against Dust -Impact Resistance: Ik08 Or Higher -Operating Temperature: -30 °C To +70 °C, Or Higher -Integrated Protection Against Lightning And Electrical Surges (Lightning Protection), Minimum 6 Kv, Or Higher -Enclosure Made Of Uv-Resistant Material, Without Degradation Due To Prolonged Sun Exposure -Centralized Management Via Compatible Controller (Same Brand As The Poe Switch And Controller) -Support For Multiple Ssids, Minimum 8 Per Radio -Security Protocols Wpa2-Enterprise And Wpa3 -Authentication Via 802.1X / Radius -Client Isolation -Captive Portal Support -Qos Support (Wmm / Ieee 802.11E) -Fast Roaming: 802.11R And/Or 802.11K/V -Firmware Updateable Remotely Via Controller -Mandatory From The Same Brand As The Poe Switch And Controller, Ensuring Native Compatibility And Unified Management -Minimum Warranty: 12 (Twelve) Months From Delivery Date, Indoor Wi-Fi 6 Access Point With Poe - Minimum Requirements: -Wi-Fi 6 Standard (Ieee 802.11Ax), Or Higher -Ofdma Support (Uplink And Downlink) -Support For Bss Coloring To Reduce Interference -Support For Twt (Target Wake Time) -Indoor Use, For Ceiling Or Wall Installation -Omnidirectional Internal Antennas -Status Led Indicator -Comes With Fixing Kit Compatible With The Type Of Installation Offered -Powered Exclusively Via Poe, Or Higher (802.3At / 802.3Bt) -One Port Rj-45 Gigabit (10/100/1000 Mbps) Uplink With Po Power -An Additional Rj-45 Gigabit Output Port (Downlink/Passthrough) For Wired Network Extension, Independent Of The Po Uplink Port, No Additional Switch Required -Vlan (802.1Q) Support -Centralized Management Via Controller Compatible With Item 3 (Same Brand) -Support For Multiple Ssids, Ensuring Native Compatibility And Unified Management -Minimum Warranty: 12 (Twelve) Months From The Date Of Delivery And Acceptance, Poe Switch For Powering Access Points (Tl-Sg2210mp) -Minimum Requirements: -Manageable Or Semi-Managed Switch (Smart Switch), Or Higher -Minimum 8 (Eight) Gigabit Poe Ports (10/100/1000 Mbps), Or More - Minimum 2 (Two) Gigabit Uplink Ports (Rj-45 Or Sfp), Or More - Standard Ieee 802.3Af And Ieee 802.3At (Poe+) On All Poe Ports, Or Higher (802.3Bt) - Full Power Poe Type Switch, Ensuring Simultaneous Delivery Of Maximum Power To 100% Of Poe Ports Without Degradation, Throttling Or Shutdown

Contact Information