|
½ Hydrometer, Complete Magnetic Multijet, Including Metallic Garrisons, Ordinance 155/2022 ½ Hydrometer, Complete Magnetic Multijet, Range 160, Flow Rate Of Q4 3, 125 M³/H, Flow Rate Of Q3 2.5 M³/½ Hydrometer With Length 165Mm, Sensitive To Low Flows Such As Q2 25 Liters/H, And Q1 15, 625 Liters/H., 45º Inclined Watch, Glass Dome, Class Ii Magnetic Shielding, Complete Including Metal Connections And Sealing Rings. Watches With Identification Of Saae De Passos/Mg. The Name Or Logo Of Saae De Passos. It Must Be Engraved On The Watch Face, Printed By Laser. Logo Stamped With A Sticker Or Label Will Not Be Accepted (Logo Will Be Sent In Pdf Format); Manufactured In Accordance With Abnt Nbr 16043/2021, Abnt Nbr 8194/2019 And Inmetro Ordinance 155/2022, With Inmetro Seal (Velocimetric Drinking Water Meter). Cold).Manufacturing Materials Must Comply With The Following Conditions:A)Have Adequate Resistance For The Use For Which They Are Intended;B)Do Not Change Due To Variations In Water Temperature Within The Working Range;C)Do Not Cause Any Degradation In The Potability Of The Water;D)Resistant To Internal And External Corrosion Or Be Protected By The Application Of Appropriate Treatment;E)The External Parts Must Be Resistant To Solar Exposure; F) The Housing Material Must Be Made Of A Brass Alloy That Contains A Minimum Of 60% Copper; Tools, Aiming To Facilitate The Installation Of The Water Meter And Subsequent Reading. The Meters Must Be Provided With An Inmetro Seal So That Once Placed, Before And After The Meter Has Been Correctly Installed, It Does Not Make It Possible To Disassemble Or Change The Meter, Or Its Adjustment Device, Without Damaging These Seals.Glass Dome: Col, Magnetic Multijet Without Connections/Trimmings, Ordinance 155/2022: ½ Hydrometer, Magnetic Multijet Without Garrisons Range 160, 125 M³/H, 5 M³/H, Being: ½ Hydrometer With Length 165Mm, Magnetic Shielding Class Ii. Watchmaking With Saae De Passos/Mg Identification The Name Or Logo Of Saae De Passos Must Be. Engraved On The Watch Dial, Abnt Nbr 8194/2019 And Inmetro Ordinance 155/2022, Without Damaging These Seals.Glass Dome: Placed On The Meter Should Not Show Any Deterioration, Hydrometer Of 1, 10M3/H, Pn-10, Magnetic Multijet Type, Qmax:10M3/H. Ordinance 155/22 1 Hydrometer, Without Connections, Inmetro Seal.A)Nominal Flow (Qn): 5.0 M3/H; L/H; E) Manufacturing Materials Must Comply With The Following Conditions: F) Have Adequate Resistance For The Use For Which They Are Intended; Suitable;J)The External Parts Must Be Resistant To Solar Exposure;K)The Housing Material Must Be Made Of A Brass Alloy That Contains A Minimum Of 60% Copper;L)They Must Be Provided With An Easily Removable Filter, Installed Upstream Of The Measuring Element;M)With Solid Watch Protection (Which Allows The Protection To Rotate Together With The Watch).The Meters Must Be Pro
|
