|
Execution And Installation Service For Fencing With Galvanized Wire Mesh 10 Mesh 4 Wire, With Material Supply 70Cm. Quotation Per Meter According To The Model And Width Of The Sheet Used, Execution Service And Installation Of Handrails Made From 1 ½ Galvanized Tubes. With 16 Thickness, Execution Service And Installation Of 1 By 3/16 Or ¼ Angle Grating And U Beam Of 50 Mm Or 75 Mm By 5 Mm Thick Or Greater, Ideal For Places With High Traffic Of Heavy Vehicles, And Cover For Manholes In Flat Bar Of 1 ½ By 3/16 Of Thickness Or Greater (Boca De Lobo), 04/10/2026 - 15:15:31, Execution Service And Installation Of Drainage Grating Made With Angle Frame ¾ By 3/16 Thick And ½ Inch Flat Bar To Be Used In Places Where Heavy Vehicles Are Not Trafficked, Execution Service And Installation Of Drainage Grating Made With Angle Frame ¾ By ¼ Thickness And 5/8 Rebar Where There Is Little Heavy Vehicle Traffic, Execution Service And Installation Of Window Grille Made Of 20X20x18 Metal Frame With Material Supply., Execution Service And Installation Of Window Grille Made Of 20X20x18 Metal Frame And 3/8 Round Or Square Flat Bar Or 3/4 Tube, With Supply Of Material, Execution Service And Installation Of Window Grid Made In ¾ Angle Frame Or Metal 20X30x18 And 3/8 Round Or Square Flat Bar, Execution Service And Installation Of Wall Grid Made In ¾ Angle Frame Or 20X30x18 Metal And 3/8 Round Flat Bar Or Square, Execution Service And Installation Of Wall Grid Made Of Metal 20X20x18, Execution Service And Installation Of Wall Grid Made Of Metal 20X30x18, Execution Service And Installation Of Wall Grid Made Of Metal 30X50x18, Execution Service And Installation Of Wall Grid Made Of Tubular Style, Tubular Style 1 Inch Up To 2. 18 Thickness Or Greater, Execution Service And Installation Of Tilting Iron Window In Angular 5/8 (Size 2, 10X 0, 80), 90), Execution Service And Installation Of A Gate Made With A ¾ Angle Frame Or Metal 20X30x18 And A 3/8 Or ½ Flat Bar. And Installation Of A Metal Gate (Square Tube) Which Can Be Made In 30X50 18 In Metal, Execution Service And Installation Of A Closed Sliding Gate With A 30X50x18 Metal Frame And 18 Corrugated Or Trepesordal Lambri Sheet, Or In 18 Or Thicker Smooth Plate, Widely Used In Garages, Execution Service And Gate Installation Tubular Being Made In 1 Inch Tubes), With Thickness 18 Or Greater, Nail Execution Service For Wooden Bridge With ½ Inch Thickness And 30Cm Long, Flashing Execution Service In Galvanized Steel Sheet N. 24, Development 50 Cm With Installation., Large Welding Execution From 11 Above., Welding Execution Average 6 To 10 Cm
|
