|
Type Of Intermediate Relay: Electromechanical Relay; Coil: 220 V Ac Alternating Current; Number Of Closing Contacts 4 Pcs; Number Of Switching Contacts; 4 Pcs; Response Time 11 Ms; Return Time 3 Ms; Mechanical Wear Resistance 150,000 Cycles; Switching Wear Resistance 150,000 Cycles (Two-Pole, Switching); Rated Switching Current Of Contacts: Up To 8 A; Rated Voltage Of The Switched Circuit: Up To 250 V Ac/Dc (Alternating/Direct Current); Mounting Form: Panel/Din Rail; Coil Resistance: ~6.2 Kohm. Gost 16022-83., Insulating Tape. Pvc (Polyvinyl Chloride) Material Is Fire-Resistant, Moisture-Resistant. Thickness: Usually 0.13-0.18 Mm; Width: 15-19 Mm; Roll Length Is At Least 25 M. Operating Temperature: From -30°C To +80°C. Dielectric Strength: 600 V. Gost 16214-86, Led Driver. Type: Constant Current Type For Led Only. Input Parameters (Pri): Voltage 220-240V Ac, Frequency 50-60 Hz, Current 0.06A. Output Parameters (Sec): Current 700Ma, Voltage 1.8-4V Dc. Maximum Power: 2.8 W., Security Radio Wave Two-Position Detector, Length Of The Protected Area 10...100 M, Height Of The Detection Zone 1.6 M, Width Of The Detection Zone 1.5 M, Recorded Movement Speed 0.1...10 M/Sec, Rs-485, Supply Voltage 9...30 V, Current Consumption Up To 45 Ma, Degree Of Protection By The Shell Ip55, Operating Temperature Range -50...+80º, Manual Mounting Foam In Tubes Of At Least 750 Ml. Color - Light Yellow, Slight Odor During Hardening, Surface Film Formation Time ~15 Min, Density ~24 Kg/M³, Shrinkage <3%, Secondary Expansion (Household - 120–150%), Heat Resistance Of Hardening Foam - From −35°C To +80°C, Water Absorption ~1.3%. Free Foaming: 70-77 L; Gap Output (Rb024): 38-45 L; Secondary Expansion: 30-50%; Preliminary Processing Time: 10 Min; Complete Cure Time: 90 Min; Foam Growth Time (+23°C/50% Rh): Up To 6 Min; Cylinder Temperature: +10°С - +30°С; Ambient Temperature: +5°С - +30°С. Type Of Foam: Professional; Gost R59599 2021., Led Lamp. Base Type Gu5.3 (Pin, Mr16), Power 9 W; Color Temperature: 4200 K (Natural White Light); Rated Voltage: 12 V (Ac/Dc) (Typically For Gu5.3, Via Transformer); Bulb Type: Reflector (Mr16); Flask Material: Plastic / Glass (Depending On The Model); Luminous Flux: ≈ 700–900 Lm; Luminous Efficiency: ≈ 80–100 Lm/W; Light Distribution Angle: 30°, 60° Or 120° (According To Optics Type); Color Rendering Index (Cri): Ra ≥ 80; Operating Current: ~0.75 A At 12 V; Power Factor: ≥ 0.5; Switching Time: ≤ 0.5 S; Dimming: According To Model; Overall Dimensions (Typical Mr16); Diameter: 50 Mm; Height: 45–55 Mm; Service Life: 15,000–30,000 Hours; Number Of Starts: ≥ 15,000 Cycles; Operating Temperature: −20 … +40 °C; Warranty Period – 12 Months. St Rk Gost R 54815-2014, Glossy Black Enamel (External Use), Container 3.5 Kg. The Base Is Alkyd Rubber, Resistant To Climatic Influences. Used For Interior And Exterior Work On Various Types Of Surfaces. Technical Characteristics: Consumption About 8 M²/L. Drying Time - About 4 Hours For Touch-Free, Full - Up To 16 Hours; Storage Temperature: +5 °C+35 °C. Gost 6465-2023., End Cap For Polypropylene Pipeline. Diameter 50Mm; Nominal Diameter: 50 Mm; Wall Thickness: 3.2 Mm; Working Pressure 10 Bar; Material: Polyvinyl Chloride; Color: Gray; Where Used: For Internal And External Sewerage; Service Life: More Than 50 Years. Gost 9544-2015., Paint Color F482. Warm Off White / Creamy White Shade With A Slight Yellowish Undertone; Consumption 10-12 M²/L On A Flat Non-Absorbent Surface; 7-9 M²/L On An Uneven Absorbent Surface; Thinner - Water; Application Method Is Applied By Brush, Spray Or Roller; Drying Time, The Next Layer Can Be Applied After 2 Hours; The Specified Level Of Wash Resistance Is Achieved After 4 Weeks; After Washing, A Slight Change In The Gloss Of The Coating Is Allowed; Density (Kg/L) About 1.2 - 1.6 Kg/L; Wash Resistance: Resistant To Easy Cleaning With A Soft Foam Sponge And Non-Abrasive Household Detergents; Wet Abrasion Resistance Class 2 Wet Abrasion Resistance According To Iso 11998/ Din En 13 300. Withstands More Than 5000 Brush Passes According To Din 53778 T2. Solids By Volume - About 53% Depending On Color. Voc Limit - Contains Voc Maximum 30 G/L; St Rk Gost R 52020 2007., Dowel-Nails. Dowel - Polyethylene, Nylon (More Elastic And Durable); Nail - Steel With Zinc Coating (Min. 6 Microns); Nail Hardness: Hardened Steel (Hrc); Size Diameter 8 Mm, Length 80 Mm; In A Pack At Least 200 Pcs. Gost 26998-86., The Core Of The Lock Is Universal Cylindrical 80 X 30 X 20 Mm; 5 Pieces Key; Brass With Chrome Plated. Gost5089 2011., Specialized Polyamide Thread/Tape For Sealing (Pa Thread Base). Density: ~1.01–1.16 G/Cm; Operating Temperature Range: Long-Term: ~+80…+100°C, Short-Term Up To +120…+150°C. Tensile Strength Up To 80 Mpa. Chemical Resistance: Resistant To Oils, Greases, Weak Acids And Alkalis; Roll – 160 Meters. Gost 24222-80., Aerosol Can. Sprayer, Volume: 400Ml; Color: Light Amber Transparent; Smell: Characteristic, Weak; Solubility In Water: Insoluble; Temperature Range Of Application: From 50°C To +150°C; Flash Point: ≈ 47°C; Density: ≈ 0.80–0.817 G/Ml At 20°C; Composition: Mixture Of Petroleum Distillates And Additives (The Exact Composition Is A Trade Secret Of The Manufacturer); Kinematic Viscosity: <1Mm²/S; Hazard Statements: Ghs02 (Flammable), Ghs07 (Irritant); Displaces Moisture From Metal Surfaces, Preventing Short Circuits And Corrosion. An Aerosol With A 360° Valve Allows You To Use The Product In Any Position Of The Container. A Product For Universal Use For Cleaning, Lubricating, Removing Moisture And Protecting Metal Surfaces, Intended For Servicing Mechanisms, Tools And Technical Components, With An Operating Temperature Range From 50°C To +150°C, Insoluble In Water, Contains Flammable Components., Wallpaper Glue. Designed For: Vinyl Wallpaper; Structural, Relief; Textile, Silk-Screen Printing; As Well As Paper Wallpaper. Ingredients: Modified Starch + Antifungal Additives + Color Indicator. Powder Glue, Diluted In Water. Color Indicator: Pink (Or Purple), Which Disappears After Drying - Helps You See Where The Glue Is Applied. Antifungal Protection (Can Be Used In Damp Areas). Consumption: Approximately 150–250 Ml/M². In Packages Of At Least 1 Kg. Gost 30535-97, Special Reinforced Wallpaper Adhesive. Professional Reinforced Pva-Based Adhesive For Glass Wallpaper, Heavy Non-Woven And Laminated Coverings. It Has High Adhesion, Is Ready For Use In 15 Minutes, Is Economical (1 Kg Per 45–60 Mm) And Forms A Colorless Joint. Purpose: Heavy Laminated Wallpaper. Composition: Methylcellulose With Added Polyvinyl Acetate (Pva) For Maximum Strength. Consumption (Per 500 G): When Pasting With A Roller (1:8): 20–25 (Enough For 4–5 Liters Of Water). With Wallpaper-Lubricator (1:10): 25–30. Packaging: In Tubes Of At Least 750G Gost 30535-97, Type: One-Component Acrylic Sealant. Base: Aqueous Acrylic Dispersion; Purpose: For Filling Seams And Cracks In Parquet, Laminate And Wooden Floors; Color: Oak (Imitation Oak Wood); Cartridge 280–300 Ml; Technical Characteristics: Application Temperature: From +5 °C To +30 °C; Operating Temperature: From −20 °C To +80 °C; Mobility (Seam Deformation): Up To 12.5–15%; Density: Approximately 1.50–1.65 G/Ml; Film Formation Time: ~20 Minutes (At 20 °C, 65% Rh); Complete Drying Time: About 24 Hours (Can Be Sanded); Shrinkage After Curing: 15–25%; Minimum Seam Width: 5 Mm; Maximum Seam Width: 20 Mm; Type Of Curing: Physical Drying (Evaporation Of Water). St Rk Gost R 52020-2007.
|
