Bids Are Invited For Hiring A Specialized Company To Supply Equipment For Outdoor Gyms In The Municipality O ... in Brazil

Work Detail

Chestplate With Handle Manufactured With Carbon Steel Tubes Of At Least 3.½? ×3.75Mm; 2? × 2Mm; 2? × 3Mm; 2? × 5.5Mm; 1.½? × 2Mm; 1.½? × 1.50Mm; 1? × 1.50Mm. Equipment Articulation Manufactured With A Tube With A Diameter Of At Least 114 Mm And A Minimum Thickness Of 7 Mm. Laser-Cut Carbon Steel Sheets With A Minimum Thickness Of 2 Mm; ??, 3/16?; ¼?. Drawn Solid Iron Rods Of At Least ?? With Zinc-Plated Fixing Screws Of At Least ?? × 1.¼? And At Least A Zinc Plated Washer??. Double Bearings, Phosphate-Based Surface Treatment Are Used; Colorful Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Mig Welding, Zinc Plated Screws, Washers And Fastening Nuts; Built-In 3.½ Plastic Internal Buffer? With A Spherical Finish Following The External Dimension Of The Tube, Injected And/Or Rubberized Plastic Finishes. Cold Galvanized Fastening Screws With Protective Cover. High Fixation Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data., Triple Elliptical Made With Carbon Steel Tubes Of At Least 2.½? × 2Mm; 2? × 2Mm; 1.½? × 3Mm; 1.½? × 1.50Mm; 1? × 2Mm. Carbon Steel Sheets With A Minimum Of 1.90 Mm; 4.75Mm; Metal Of At Least 30Mm × 50Mm × 2Mm. Flat Bar At Least 3 / 16? × 1.¼?. Built-In Internal Buffer In Injected Plastic Of At Least 2.½? With Spherical Finish. Anchor With Flange Of At Least 230 Mm × 3 / 16?, Laser Cut With Zinc-Plated Fixing Screws Of At Least ?? × 1.¼? And Zinc Plated Washer Of At Least ??, Drawn Solid Iron Rods Of At Least ??. Zinc Plated Fixing Screws And Nuts. Solid Pins Are Used. 3M® Destructive Reflective Sticker For High Fixation With Identification Of Muscle Groups, Multi-Exerciser Six Functions, Manufactured With Carbon Steel Tubes Of At Least 2.½? × 2Mm; 2? × 2Mm; 1.½?× 3 Mm; 1.½? × 1.50Mm; ¾ × 3.00; ¾? × 1.20; Oblong Of At Least 20 Mm × 48 Mm × 1.20 Mm. Round Bar ¼?. Carbon Steel Plates Of At Least 9.52 Mm; 6.35Mm; 4.75Mm; 3Mm; 1.90Mm. Flat Bar 3/16? × 1.¼?; ?? X ¾?. Drawn Carbon Steel Tube 2? × 5.50 Mm Schedule 80 (60.30 × 49.22). Solid Pins Are Used, All Bearings (Double Bearings), Round Flexible Rubber Stops (53 Mm X 30 Mm), Acetal Bushing, Parabolt Anchor Of At Least ??, Washers And Fastening Nuts; 2.¼ External Metal Built-In Cap? With Spherical Finish, Injected Plastic And/Or Rubberized Finishes And Parallel To The External Wall Of The Tube. Single Tube With Diameter Reduction, Eliminating Welded Seams, In Hand Grip. Highly Adherent Destructive Reflective Sticker With Identification Of Muscle Groups, Double Walking Simulator Manufactured With Carbon Steel Tubes Of At Least 2? ½ X 2 Mm; 2? X 2Mm; 1? ½ X 1.50 Mm. Carbon Steel Plates Of At Least 4.75 For The Equipment Fixing Point And 1.9 Mm For The Foot Support Plate. Schedule 80 Drawn Carbon Steel Tube (73 Mm X 58.98 Mm). Use Solid Pins, Phosphate-Based Surface Treatment; Colorful Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Minimum 3/8 Parabout Anchor? X 2 ½?, Zinc Plated Screws; Injected And/Or Rubberized Plastic Finishes. 3M High Fixation Destructive Reflective Sticker With Identification Of Muscle Groups, Individual Ski Made With Carbon Steel Tubes

Contact Information