|
Bushing Insulator Ipu 10/630 7.5 Uhl1. Rated Voltage - 10 Kv, Rated Current - 630 A, Lightning Impulse Test Voltage - 80 Kv, Minimum Destructive Bending Force - 7.5, Creepage Length - 300 Mm, Weight - 8.5 Kg. Gost 15150-69., Fuse-Switch Block Bpv-2 250A With Pn-2. Designed For Infrequent Switching On And Off, As Well As For Protecting Electrical Networks And Receivers From Unacceptable Long-Term Overloads And Short Circuit Currents. The Boxes Are Used In Electrical Installations Of Both Alternating And Direct Current (Moving And Fixed Contacts Of The Base Are Made Of Electrical Copper, Grade M1). Gost 15150., K9 Cap. Pin Diameter – 24 Mm. Weight – 20 G. Gost 18381-80, Insulator Shf – 20G1. Porcelain Pin Insulators Шф - 20Г1 Are Intended For Insulation And Fastening Of Insulated Wires Sip - 3. Rated Voltage, Kv - 20 Minimum Mechanical Breaking Load, Kn - 13, Creepage Distance - 400 Mm. Withstand Voltage 50 Hz (In The Rain), Kv – 65. Withstand Impulse Voltage 1.2/50, Kv – 135. Withstand Voltage In Dry Condition, Kv – 85 Weight, Kg. – 3.8. Gost 1232-93., The Tension Bolt Clamp Nb-2-6A Is Designed For Fastening Aluminum, Steel-Aluminum And Copper Wires With A Cross-Section From 70 To 120 Mm2 To The Tension Hangers Of Anchor Corner Supports. Gost R 51177-98., Cap K7. The Inner Diameter Of The Pin Is 22 Mm, The Outer Diameter Is 31.5 Mm, The Height Is 35.9 Mm, Bending Force (Perpendicular To The Axis) Is 3.5 Kn (350 Kgf), Bending Force (Along The Axis) Is 0.735 Kn (75 Kgf). Gost 18381-80., Switch Bpv 4 400A. Designed For Manual Direct Or Remote Closing, Opening Or Switching Of Electrical Circuits. Performed For Currents From 100A And Above. Separate Series, Mainly Direct Current, Are Produced For Currents Up To 10 Ka. Switches Are Also Manufactured For Low Currents: 5-10A (Moving And Fixed Contacts Of The Base Are Made Of Electrical Copper Grade M1). Gost 15150., Automatic Connecting Clamp Cil 2. Used For Connecting Bare Conductors. Automatic Connection Clamps Are Reliable And Easy To Install Without The Use Of Additional Tools. Characteristics And Description: • Clamp Type - Connecting, Automatic Connecting Clamp, Wire Cross-Section, Mm2: 70-95, Wire Diameter, Mm: 9.3-11.7. Gost R 70352-2022., Tip A–70–12. Aluminum Cable Lugs, Secured By Crimping, Are Intended For Terminating Wires And Cables With Aluminum Conductors With A Cross-Section Of 70 Mm2. The Tips Are Made Of Aluminum Pipe. Gost 9581-80., Die Clamp Pa - 2 - 2. The Three-Bolt Connection Clamp Pa-2-2 Is Used For Connecting Aluminum And Steel-Aluminum Wires Of Grades A70, Ac50/8, Ac70/11, As Well As Protected Sip-3 Wires With A Cross-Section Of 50, 70 Mm2 In Cables Of Overhead Line Anchor Supports And Making Taps. Characteristics: • Wire Diameter, Mm: 9.6-11.4 • Size A, Mm: 30 • Size B, Mm: 46 • Size D, Mm:: 12 • Size H, Mm: 46 • Size L, Mm: 82 • Weight, Kg: 0.20. Gost 4261-82., Wire Sip3 1*70. Cross-Sectional Diameter 17.00 Mm. Minimum Bending Radius 170Mm. The Nominal Thickness Of The Core Insulation Is 1.70 Mm. Electrical Insulation Resistance At 1 Km And 20ºс: 12 Mohm. Permissible Current Load 240A. Permissible Short Circuit Current 6.50 Ka. Gost 31946-2012, Set Of Mounting Parts For Rlnd (Kron-Yn (Ra-5 3 Pcs., Ra-2 1 Pc., Ra-1 1 Pc.), Clamp X7-3 Pcs., Shaft Ra-3 2 Pcs.). Gost R 52726-2007.
|
