|
Charcoal Graphite Electrode 3/8 - 9.52X305mm, A600 Electrode Holder (Pliers), Mig Wire 0.8 Mm 15Kg, Mig Welding Wire 1.00Mm - 15Kg, Leather Scraping Apron (Safety Apron Made From Groopon Scraping With Sleeves, Barber Model With Closing In Strips On The Top And Bottom And Elastic On The Upper Back Covered With Scrape 100 2, 5 (1Kg Pack), 9Kg Acetylene Cylinder, 10M3 Oxygen Cylinder, Negative Clamp - 500 Amps, Special Gas - Composed Of 75% Pure Argon And 25% Co2\, With An Inert And Odorless Appearance\, Used For Welding At Pressures Of 190 To 200 Kgf/Cm², Cylinder With 10 M³., Voltage Inverter - 12Vdc, 110/220Va., Cutting Torch Nt 5500., Twin Hose - Double Hose For Welding Torch, In Ethylene Propylene-Diene-Epdm Synthetic Rubber, With Internal Reinforcement Of Synthetic Wire Locks, For General Welding, Measuring 100M, Black Tube, With Green Oxygen And Red Acetylene Cover, Internal Diameter Of 5/16¨, Maximum Pressure 300 Psi, Welding Machine - Multiprocess Welding Machine 220V, Suitcase, Mig/Mag Welding System, Coated Electrode (Mma) And Tig Dc (Liftarc) With Minimum Of 200 Amp. Ideal Capacity. Dap Minimum Electrode Up To 3.25 Mm. Dap Wire Between 0.6 And 0.8 Mm, With Gas. And 0.8 Without Gas., Mig Welding Machine Set. Mig 360 Trif. 220/380/440V., Automatic Welding Mask – Mab 90 Plus, Suitable For Coated Electrode, Mig/Mag, Tic Welding With Internal Battery Life Of 5,000 Hrs And Clarity Level Din.4 And Darkening Level Din.9A Din. 13, Uv/Iv Protection Up To Din.16 With Darkening Time Of 0.06Ms, Delay Time Of 0.1A 1.0S And Operating Temperature -5°C To 55°C - Ca 43.820., Gaseous Oxygen - With Industrial Oxygen Element Non-Liquefied Solder, In Gaseous State And Packed In High Pressure Cylinders, Minimum Purity Degree Of 99.5%, Cylinder With 10 M³., Acetylene Refill Cylinder Of 9Kg., Acetylene Regulator Ri - 03 - Industrial Use, Welding, Cutting And Heating., Pressure Regulator - Polished And Chromed Brass, With Flow, With Inlet Pressure 25 Bar And Outlet Pressure 1.5 Bar, For Cylinder Acetylene, Used For Oxigas Welding, Pressure Regulator - Oxygen Pressure Regulator Used In Welding/Cutting/Heating Applications, With Input Pressure 230 Bar And Outlet Pressure 10 Bar, Pressure Regulator For Co2, Welding - Wire Type For Copper Welding 2.38Mm., Mig Torch 400A With 3.5 Meters For Mig/Mag Welding Machines
|