Bids Are Invited For Acquisition Of Office Tables And Others in Brazil

Work Detail

Ergonomic Desk Chair, Without Arms. Seat: Injected Foam, 40 Mm Thick, 410 Mm Wide And 390 Mm Deep. Backrest: Height 280 Mm, Width 360 Mm, Foam Thickness 40 Mm. Fixed Base With 4 Feet And % Tube Steel Structure. Maximum Supported Weight: 110 Kg., Oval Office Meeting Table 10 Seats, Steel Panel. Measurements: Height: 740 Mm; Width: 2700 Mm; Depth: 1100 Mm. Finish: Top 25Mm; Top Made In Bp With 2Mm Edge Tape; Feet Made In Bp With 1Mm Edge Tape; Skirts Made Of Carbon Steel Or Bp 18Mm; Table With Perforated Steel Front. Wooden Top Color: Cobalt; Color Of Metallic Parts: Aluminum., Flying Drawer With 02 Drawers And 01 Drawer Body Made Of Gray Mdp Sheet, Coated With Low Pressure Textured Melamine Film On Both Sides, 25Mm Thick For The Top And 18Mm For The Vertical Bottom And Other Parts. Maple Tape For Covering And Finishing The Flat Edges Of The Sheet Metal, Made Of Pvc Tape In The Color And Pattern Of The Coating, With Impact Resistance And Thermally Stable. Fixed To The Substrate By The Gluing Process With Hotmelt Adhesive. With 2Mm Thickness For The Top And 1Mm For The Other Parts. Fastening System By Means Of A Rotating Drum Made Of Ø15mm Zamak, M6 Quick Assembly Screw And Plastic Finishing Covers Made Of Ø18mm Polyethylene. Slides Made Of Stamped Steel Sheet With Epoxy Paint, 400 Mm Long And Nylon Pulleys. Fixed To The Body Using Self-Tapping Screws. Drawers Made From Continuous Mdp Sheet Metal, 18Mm Thick For The Front And Body Of The Drawers. Drawer For Hanging Folders In The Same Material And Finish As The Body. 400 Mm Long Telescopic Slides With Steel Balls, Made Of Sheet Steel, Fixed To The Cabinet Using Self-Tapping Screws. Two Ø1/4 Drawn Steel Rods, One Front And One Rear To Support The Suspended Folders. Bottom Of The Drawers Made Of 3Mm Thick Hardboard. Keying System With Front Application And Simultaneous Locking Of The Drawers. Consisting Of A Cylinder With A Ø17x23mm Body, With Tabs For Fixing, Chrome Finish And Key With Double-Sided Retractable Plastic Cover, With 180º Rotation. Handle Type Handles, Measuring 96Mm Between Fixing Holes Made Of Zamak Without Sharp Edges, Thus Guaranteeing Greater Safety To The User Located On The Front Of The Drawers And/Or Doors. From Fixation Confecc, 03/26/2026 - 15:53:26

Contact Information