|
White Pvc Insulating Tape. Electrical Tape, Pvc Tape With An Outer Diameter Of At Least 85 Mm, A Width Of 15 Mm And A Thickness Of The Wound Tape In A Radius Of At Least 2.5 Cm, The Thickness Of The Tape Of One Layer Is At Least 0.11 Mm, Should Not Have An Unpleasant, Pungent Odor. Heat-Resistant - Does Not Lose Its Properties In The Temperature Range From –30 To +70 ° C, Manufactured According To The Gost-16214-86 Standard, Premium Or First Grade. The Tape Should Not Have Punctures, Bubbles, Tears Or Other Defects. It Has A Smooth Surface Of The Roll, Which Has No Bulges Or Gaps. When Unwinding The Tape From The Roll It Should Not Tear Or Separate In Pieces. The Length Of The Tape Is At Least 20 Meters. The Color Of The Electrical Tape Is White. Compliance With Gost 16214-86 (According To Technical Specifications), Antifreeze. Coolant. Antifreeze Is Intended For Cooling Internal Combustion Engines And Is Used In Heat Exchangers Operating At Low Temperatures. Composition Based On High-Quality Ethylene Glycol Using Additives. The Composition Has Anti-Corrosion And Anti-Foam Properties, And Also Has Good Lubricity And Protection Against Cavitation. The Presence Of Fluorescent Paint In The Antifreeze Composition, Which Allows You To Detect Leaks When Illuminated With An Ultraviolet Lamp. The Operating Temperature Range Is Not Lower – From Minus 40°C To +112°C. Gost 28084-89 (According To Technical Specifications), Set Of Two-Component Glue. Set Of Two-Component Universal Glue. A Set Consisting Of Quickly Polymerizing High-Viscosity Adhesive On A Cyanoacrylate Base - 65 Grams Of Glue In A Plastic Container And An Activator Aerosol In A Metal Can - 200 Milliliters. High Strength Of Connection Between Different Surfaces; Hardening Speed No More Than 10 Seconds; Has A Viscous Structure, Does Not Flow, Does Not Drip; Characterized By High Tensile Strength; Used For Fastening Or Repairing Any Wooden Products, Parts, Furniture. Glues Mdf, Plywood, Wood, Chipboard, Rubber Parts, Leather, Pvc, Foam Rubber. Temperature Resistant - Up To 71°C, And Moisture Resistant. Bonds Metals (Raw, Phosphated, Baked, Primed, Painted And Anodized). Weight Not Less Than 270 Grams. Compliance With Gost 12172-2016. (According To Technical Specification), Anchor Dowel 6X40mm, Fungus. Plastic Dowel Dowel, Polypropylene Mushroom. Cuff Sm-G 6X40mm. The Kit Consists Of A Dowel And A Nail Screw Inserted Into The Dowel. Slots For Screwdriver +. Gost 26998-86 (According To Technical Specifications), Wood Screws With Countersunk Head, 3.5 X 25 Mm. Screw, Self-Tapping Screw 3.5 X 25 Mm, Thread Pitch - 1.5 Mm, For Plasterboard And Wood, Oxidized. The Head Is Countersunk, Slots For A Figured Screwdriver +, Head Diameter 8 Mm. Color Black. Gost 1759.1-82., Black Pvc Insulating Tape. Electrical Tape, Pvc Tape With An Outer Diameter Of At Least 85 Mm, A Width Of 15 Mm And A Thickness Of The Wound Tape In A Radius Of At Least 2.5 Cm, The Thickness Of The Tape Of One Layer Is At Least 0.11 Mm, Should Not Have An Unpleasant, Pungent Odor. Heat-Resistant - Does Not Lose Its Properties In The Temperature Range From –30 To +70 ° C, Manufactured According To The Gost-16214-86 Standard, Premium Or First Grade. The Tape Should Not Have Punctures, Bubbles, Tears Or Other Defects. It Has A Smooth Surface Of The Roll, Which Has No Bulges Or Gaps. When Unwinding The Tape From The Roll It Should Not Tear Or Separate In Pieces. The Length Of The Tape Is At Least 20 Meters. The Color Of The Electrical Tape Is Black. Compliance With Gost 16214-86 (According To Technical Specifications), Metal Scissors. Metal Scissors, Hand Tool. Designed For Straight Cutting Of Cold-Rolled Sheet Steel Up To 1.2 Mm Thick Inclusive, Stainless Steel Up To 0.8 Mm Thick, Aluminum, Copper, Metal Mesh, Leather, Plastic. The Scissors Have Micro-Toothed Cutting Edges For Precise Cutting And Anti-Slip, As Well As An Automatically Releasing Locking Mechanism. Equipped With Oil-Resistant Ergonomic Handles With Stops For Comfortable Work And A Loop For Hanging And Attaching To Clothing. Straight Scissors, Material Chrome-Molybdenum Steel, Tool Length No Less Than 250 Mm, Weight No Less Than 0.56 Kg. Gost 7210-75 (According To Technical Specifications), Safety Glasses. Safety Glasses Are Designed To Protect The Organs Of Vision From Solid Flying Particles And Splashes Of Non-Corrosive Liquids. Equipped With Indirect Ventilation Ducts Allowing Operation In Dusty Environments. The Design Features Of The Glasses Allow Them To Work With Aerosols And Liquids. Type Of Glasses: Closed Color Of Lenses, Glasses: Transparent; Gost 12.4.013-85. The Width Of The Headband Of Closed Safety Glasses Must Be At Least 14 Mm; The Length Of The Headband Should Allow The Glasses To Be Adjusted According To The Circumference Of The Head From 540 To 620 Mm Inclusive. Gost 12.4.013-85 (According To Technical Specification), Ladder Stepladder. Stepladder, With Mounting Platform, Sliding, Aluminum, Seven-Step. Technical Characteristics: Stepladder Material - Aluminum; Working Height 340 Cm; The Number Of Steps Is At Least 7 Pieces; The Height Of The Stepladder In Working Condition Is At Least 2060 Mm; The Height Of The Platform In Working Condition From The Floor Level Must Be At Least 1420 Mm; Maximum Load Not Less Than 150 Kg; Aluminum Stepladder - Designed For Various Indoor Works. Steps With A Width Of At Least 100 Mm, A Length Of At Least 400 Mm, The Steps Are Corrugated, Prevent Foot Slipping And Ensure Safe Ascent And Descent Of A Person. Plastic Pads On The Legs Prevent The Stepladder From Sliding On The Surface, Which Guarantees Stability And Safety. The Presence Of A Safety Arc; The Connection Of The Hinges And Fastening Of The Steps Is Riveted; The Presence Of A Border, The Presence Of A Profiled Steel Platform At A Height Of 1.4 Meters; The Supporting Nozzles Of The Sidewalls Are Non-Slip; The Sides Are Made Of Durable Rectangular Aluminum; The Stepladder Must Have A Certificate In Strict Accordance With Gost R 58752-2019 And Din En-131. Compliance With Gost 26887-86 (According To Technical Specifications), Screw Anchor For Drywall. Screw Anchor Tt22 Pba, For Gypsum Boards, Anchor Size 14X39 Mm, Nylon Material, Designed For Installation And Fixation Of Fasteners On Walls Made Of Plasterboard, Foam And Aerated Concrete Blocks, Has A Double Helix. Dowel With A Diameter Of 14 Mm And A Length Of 39 Mm. Each Screw Anchor Is Supplied With A Screw, With A Press Washer, With A Flat Head: Head Diameter 10.7 Mm, Threaded Rod Diameter 3.2 Mm, Length 30 Mm. Gost 26998-86 (According To Technical Specifications), Reinforced Claw Crowbar, Hexagonal. Dimensions: No Less Than 900X30x15 Mm. Section 30X15 Mm. On One End It Has A Flat And Sharpened Shape, On The Other Side It Has A Curved Shape, At The End There Is A Flat Paw With A Slot For Grabbing The Nail Head And Pulling It Out. Material Steel. Compliance With Gost 1405-83 (According To Technical Specifications), Anchor Dowel 10X100mm. Dowel Anchor 10*100Mm, Plastic Part Of The Dowel Anchor With Longitudinal Flat Stiffening Ribs That Structurally Prevent Rotation In The Hole, Previously Prepared In Concrete Structures, When Screwed Into The Plastic Part Of A Threaded Metal Dowel. The Head Of The Metal Part Of The Dowel Anchor (Screw) Is Hexagonal, Designed For Rotation With Wrenches No. 12-14. Gost 26998-86 (According To Technical Specification), Wood Screws With Countersunk Head 3.5 X 55 Mm. Screw, Self-Tapping Screw 3.5 X 55 Mm, Thread Pitch - 1.5 Mm, For Plasterboard And Wood, Oxidized. The Head Is Countersunk, Slots For A Figured Screwdriver +, Head Diameter 8 Mm. Color Black. Gost 1759.1-82., Screws With Drilling Head 4.2X32 Mm. Screw 4.2 X 32 Mm With A Drill For Fastening Metal Sheets Up To 2 Mm Thick With A Drill, Slots For A Figured Screwdriver +, Screw Head With A Press Washer With A Diameter Of At Least 10.7 Mm. Material Galvanized Iron. +. Gost 1759.1-82., Screws With Drilling Head 4.2X16 Mm. Screw 4.2X16 Mm With A Drill For Fastening Metal Sheets Up To 2 Mm Thick With A Drill, Slots For A Figured Screwdriver +, Screw Head With A Press Washer With A Diameter Of At Least 10.7 Mm. Material Galvanized Iron. +. Gost 1759.1-82., Anchor Dowel 6X40mm, Hidden. Plastic Dowel Dowel, Polypropylene Anchor 6*40Mm, Hidden Cuff. The Kit Consists Of A Dowel And A Nail Screw Inserted Into The Dowel. Slots For Screwdriver +. Gost 26998-86 (According To Technical Specifications)
|
