Tender For Demolishing Reinforced Cement Concrete Work Manually/ By Mechanical Means Including Stacking Of S ... in India

Work Detail

Tender For Demolishing Reinforced Cement Concrete Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In- Charge , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below , Dismantling Steel Work In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates, Bolts, Nuts, Cutting Rivets, Welding Etc. Including Dismembering And Stacking Within 50 Metres Lead. , Dismantling Precast Concrete Or Stone Slabs In Walls, Partition Walls Etc. Including Stacking Within 50 Metres Lead : Thickness Up To 40 Mm , Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineerin- Charge. , Taking Out Of Stone Slab Flooring Or Precast Cement Concrete Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:5:10 (1 Cement : 5 Manufactured Sand Derived From Recycled Concrete Aggregate (Rca) : 10 Graded Stone Aggregate 20 Mm Nominal Size Recycled Aggregate (Ra) ). , 40 Mm Thick Fine Dressed Stone Flooring Over 20 Mm (Average) Thick Base Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand), Including Pointing With Cement Mortar 1:2 (1 Cement : 2 Stone Dust) With An Admixture Of Pigment To Match The Shade Of Stone. Red Sand Stone , Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5Mm), Including Making Drainage Opening Wherever Required Complete Etc. As Per Direction Of Engineer-In-Charge (Length Of Finished Kerb Edging Shall Be Measured For Payment). (Precast Cement Concrete Kerb Stone Shall Be Approved By Engineer-In-Charge). , Providing And Laying In Position Cement Concrete Of Specified Gradeexcluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Lll) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For : Foundations, Footings, Bases For Columns , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iil) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundations And Plinth In : Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Providing And Fixing Plain Multipurpose Cement Board(Hight Pressure Steam Cured) With Suitable Screws Etc. In M.S. Frame, Walls, Ceiling Etc. Complete 18 Mm Thick Cement Fiber Board As Per Is: 14862 : 2000 , Providing And Fixing 18 Mm Thick Gang Saw Cut, Flamed Finish, Premoulded And Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over Cup Board With Multisustrate Adhesive Sealant Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding Of Edges To Give High Gloss Finish Etc. Complete At All Levels.Granite Stone Slab Of Colour Black, Cherry/Ruby Red Area Of Slab Over 0.50 Sqm , Providing And Fixing Of 18 Mm Thick Block Board With Commercial Ply In Shelves, Racks, Drawer, Cupboard, Kitchen Cabinet Under Kitchen Counter Etc. With Screws And Fittings As Per Complte Entire Direction And Satisfaction Of Engineer In Charge. 18 Mm Thick , Providing And Fixing 25Mm Thick Pre-Laminated Medium Density Fibre Board Exterior Grade ( Grade-I) Is:14587:1998 Marked With One Side Decorative And Other Side Balancing Lamination For Cupboard Shutters Edges To Be Sealed With Pvc Edge Bending Tape 2.00 Mm Thick Of Approved Brand Including Isi Marked Nickel Plated Bright Finishing With Soft Closing Hinges Marked With Necessary Screw Etc All Complete.(Hinges Will Be Paid Separetaley) , Providing And Fixing Stainless Steel Soft Closing Spring Hinges At Required Degree Hinges (Hydraulic Type) Of Approved Make/Brand To Cupboard Shutters With Full Threaded Steel Screws Including Making Necessary Recess In Board And Finished Etc. Complete As Per Direction Of Engineer-In-Charge. , Providing And Fixing 1 Mm Thick M.S. Sheet Door With Frame Of 40X40X6 Mm Angle Iron And 3 Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer.Using Flats 30X6 Mm For Diagonal Braces And Central Cross Piece , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Is: 4454 - Part 1 And M.S. Top Cover Of Required Thickness For Rolling Shutters. : 80X0.90 Mm M.S. Laths With 0.90 Mm Thick Top Cover , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubesetc.) Post With Special Provision For Fixing Of Toughned Glass And Polycarbonate Sheet Etc. With The Help Of Sillicon Sealant And Requred Size M.S. Channel Etc., Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Approved Steel Primer,Including Welding And Bolted Withspecial Shaped Washer Setc.Complete. Hot Finished Welded Type Tubes , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge : Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , Providing And Fixing Plain Multipurpose Cement Board(Height Pressure Steam Cured) With Suitable Screws Etc. In M.S. Frame, Walls, Ceiling Etc. Complete 18 Mm Thick Cement Fiber Board As Per Is: 14862 : 2000 , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. 75 Mm Diameter , Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50X50 Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length, Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete. 75 Mm , Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/ Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion.Bend 87.5° 75 Mm 75 Mm , Providing & Fixing At All Heights, Levels And Locations Mill Finish Aluminium Alloy Roofing Sheets Of Alloy Is Designation 31500, Temper Hx8 Conforming To Is 737 And Dimensions As Per Is Code 2676 With Characteristics Of Good Formability And Corrosion Resistance. The Profile Sheets Shall Be Fixed To Truss Members In Slope Or Required Pitch Or Curvature With Hex Cap Headed Self Drilling/Tapping Stainless Steel Screws M6, 50 Mm Long With 3 Mm Epdm Seal Washer Etc. All Inclusive Of Labour, Scaffolding, T&P And Sundries Etc. Complete As Per Directions Of The Engineer-In-Charge. (Cost Of Truss/Frame Work Shall Be Paid Separately). 0.56 Mm, Aluminium Troughed Coloured Profile With Center To Center Pitch Of 200 Mm, Depth Of 32 Mm, Overall Profile Width 1092 Mm, Cover Width 1000 Mm. , Providing And Fixing Of Pre-Coated Colour Or Mill Finish Aluminium Roofing Accessories In 0.71 Mm Thickness ,Alloy 31500 (Is Designation) [Aluminium Alloy (Aa) 3004 (Iso Designation)]. For Colour, Coating Shall Be 5-7 Microns Epoxy Primer On Both Sides Of The Sheet And Polyester Top Coat 15-18 Microns, Using Self Drilling/Tapping Ss Screws Of Size 6 X 50 Mm With 3 Mm Thick Epdm Seal And Ss Plain Washer Complete :Precoated/Mill Finish Aluminium Flashings/ Aprons (Upto 600 Mm) , Providing And Fixing Of Pre-Coated Colour Or Mill Finish Aluminium Roofing Accessories In 0.71 Mm Thickness ,Alloy 31500 (Is Designation) [Aluminium Alloy (Aa) 3004 (Iso Designation)]. For Colour, Coating Shall Be 5-7 Microns Epoxy Primer On Both Sides Of The Sheet And Polyester Top Coat 15-18 Microns, Using Self Drilling/Tapping Ss Screws Of Size 6 X 50 Mm With 3 Mm Thick Epdm Seal And Ss Plain Washer Complete :Precoated/Mill Finish Aluminium Gutter (600 Mm Over All Girth) , Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10X0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15X0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : 12.45.1 12.5 Mm Thick Tapered Edge Gypsum Plain Board Conforming To Is: 2095- (Part I) :2011 (Board With Bis Certification Marks) , 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) , 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6 (1 Cement: 6 Coarse Sand) , Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gram/Litre, Of Approved Manufacturer And Of Required Shade And Colour All Complete To Achieve Even Shade And Colour : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Having Voc Content Less Than 50 Gram/Litre , Painting With Duco Paint (Two Or More Coats) At All Locations Prepared And Applied As Per Manufacturers Specifications On Steel Work , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound ) Content. With Ready Mixed Pink Or Grey Primer On Wood Work (Hard And Soft Wood) Having Voc Content Less Than 50 Grams/ Litre , Taking Out Existing Cement Concrete Interlocking Paver Blocks From Footpath/ Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In-Charge. , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge. Nominal Concrete 1:3:6 Or Richer Mix (I/C Equivalent Design Mix) , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge.Nominal Concrete 1:4:8 Or Leaner Mix (Including Equivalent Design Mix) , Providing And Fixing 10 Mm Polycarbonate Sheet In Ms Structure Frame By Silicon Sealant Including Ndmc Logo Or Any Other Design As Approved By Engineer-In-Charge ( Ms Frame For Fixing Of Polycarbonate Shall Be Paid Separetely) , Providing And Fixing12 Mm Thick Toughned Glass Of Approved Brand And Manufacture In Ms Structure Frame By Silicon Sealant As Approved By Engineer-In-Charge ( Ms Frame For Fixing Of Toughned Glass Shall Be Paid Separetely) , Providing And Fixing Of Self Adhesive Glass Film Having Desired Design/Logo 3M Florocent As Per Direction Of Engineer-In-Charge , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 6 Pin 5/6 A & 15/16 A Modular Socket Outlet And 15/16 A Modular Switch, Connections Etc. As Required. , Installation, Testing And Commissioning Of Pre-Wired, Fluorescent Fitting / Compact Fluorescent Fitting Of All Types, Complete With All Accessories And Tube/Lamp Etc. Directly On Ceiling/ Wall, Including Connections With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable And Earthing Etc. As Required. , Providing And Fixing Ornamental Hollow Cast Iron Cap At The Top Of Kiosk Having Square Base 30X30 Cm Surmounted By 20 Cm Dia Semi-Spherical And Minimum Thickness Of Cap At Any Point 10Mm And Total Height Of The Cap 30 Cm As Per Direction Of Engineer-In-Charge. , Providing And Fixing Aluminium Channel Or Any Other Design Made Of 1 Mm Thick Aluminium Sheet For The Purpose Of Architecture Feature Fixed With Multi Substrate Adhesive Sealant Complete As Per Entire Direction And Satisfaction Of Engineer In Charge. , Providing And Fixing Of Led 12 V Profile Light As Approved By Engineer In Charge In Inverted Channel Or Any Other Location As Per Site Requirement . , Providing And Fixing Of 5 Watt Led Cob Warm Light Including All Fitings And Wire As Approved By Engineer In Charge In Inverted Channel Or Any Other Location As Per Site Requirement . , Providing And Fixing Outdoor Wall/Surface Mounted Led Sinages Screen For Optimum Resolution , Ip - 67, Bightness 6500 Nits And Above,Pixel P-6, Voltage 220-240 Vac Frequency 60 Hz, Body Material Acrylic As Per Approved By Engineer In Charge . , Disposal Of Building Rubbish / Malba/Silt / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting And Unloading The Same At Any C&D Waste Management Site Within 25Kms. Lead I.E. Shastri Park/Burari/Mundka Including Weighting At Plant Etc. Complete As Per Direction Of Engineer-In-Charge. Weighing And Unloading At The Plant Shall Be As Per Procedures/Rules Of Plant Management. The Rates Are Inclusive Of All Operations, Labours, Leads And Lifts From Site Of Work To The C&D Waste Plant. The Processing Fee Of C&D Management At Prescribed Rates Will Be Deposited By The Agency And The Same Shall Be Reimbursement By The Department On Production Of Only Original Cash Receipts. , (Minus Item) Purchase And Taken Away Of Ms Iron Scrap From Site Including All Lead And Lift Involved.

Contact Information