|
Lot 01 - Furniture - 0054977 - Tall Storage Module, With 02 Doors And 04 Shelves (Carbon Steel, Mdf And Abs) - Module In Carbon Steel, Mdf And Abs, Can Be Disassembled Into 11 Parts: 2 Sides, 1 Bottom, 1 Base, 1 Headboard, 2 Doors, 4 Dividing Shelves. Upper And Lower Closure In Gray Abs, With 4 Mm Wall Structure (In Any Cross Section), With 6 “Castles” For Fixing To The Rectangular Structure, (Tube 25 X 25 Mm) Use For Joining Between The Plastic Base And The Rectangular Structure, Special Screws For Plastic. The Module Must Have The 12 Vertices That Make Up Its Shape With A Radius Of At Least 50 Mm, Without Meetings And Edges With Sharp Corners. The Feet Of The Module Are Made Of Injected Plastic In The Same Gray Color, With A Round Shape And A Diameter Of 50 Mm, A Height Of 25 Mm, A Shoe Wall With A Thickness Of 3.5 Mm, The Final Edge In Contact With The Chamfered Floor With An Inclination Of 45° And A Height Of 2 Mm, With A 5/16 Central Screw That Allows Its Adjustment (The Other Specifications Of The Item Are Provided For In The Terms Of Reference Of The Notice)., Lot 01 - Furniture - 0054978 - Flying Drawer With Five Drawers - Height: 65 Cm Width: 44 Cm Depth: 55 Cm. Measurements Can Vary By +/- 5. Top And Body In Mdf Medium Density Chipboard, With A Minimum Thickness Of 18 Mm, Covered On The Upper Side With Textured High-Pressure Melamine Laminate And On The Lower Side With Low-Pressure Melamine Laminate, Edges With Polystyrene Tape In The Same Color As The Top With A Minimum Thickness Of 2 Mmm. Top Fixed To The Structure Using Brass Screws And Zamac Bushings (Non-Ferrous Metal Alloy) With High Torque Resistance. Medium Density Agglomerated Wood Body, Coated With Low Pressure Melamine Laminate On Both Sides, Resistant To Abrasion, Headed With Polystyrene Tape With Textured Visible Surface, With A Minimum Thickness Of 2 Mm With High Impact Resistance (The Other Specifications Of The Item Are Provided In The Terms Of Reference Of The Notice)., Lot 01 - Furniture - 0054979 - Straight Table 1.20 Visible Textured Surface, 2.5 Mm Thick In The Same Color As The Top And Ergonomic Radius Of Contact With The User, Fixed To The Structure Using Chipboard Type Self-Tanning Screws With Ø 5 Mm. Front Panel, Made Of Mdp Or Mdf, With A Thickness Of 18 Mm, And Covered With Low Pressure Melamine Laminate In Gray Color, On Both Sides, Topped On The Lower Part With Polystyrene Or Pvc Tape With A Visible Textured Surface With A Thickness Of 0.5 Mm In The Color Of Melamine (The Other Specifications Of The Item Are Provided In The Notice Term Of Reference)., Lot 01 - Furniture - 0054980 - Fixed Chair (External Public) - Seat And Back In Virgin Polypropylene Copolymer, Free From Mineral Fillers, Injected, In Gray Color. The Molds Of The Seat And Back Must Be Engraved With The International Recycling Symbol, Showing The Polymer Identification Number, A Batch Date Indicating The Month And Year Of Manufacture, The Model Identification, And The Name Of The Company Manufacturing The Injected Component. The Backrest Must Have At Least Four Reinforcement Fins On Its Back Surface Facing The User.
|
