|
Trapezoid Set In High-Impact Plastic Resin. Set Composed Of 06 Tables, 06 Chairs And 1 Central Table – Childrens Size Table In Trapezoid Shape, Allowing The Formation Of Circles With 6 Tables; 06 Chairs And A Central Table, For Collective And Non-Individual Use, Table Top Made Of Abs Thermoplastic Resin Measuring 660Mm Table Top Structure Formed By 03 Rectangular Industrial Steel Tubes Measuring 30Mm X 20Mm And An Oblong Tube Measuring 30Mm X 16Mm. Height 59Cm. An Oblong Tube Bar Measuring 30Mm X 16Mm Fixed On The Front Between One Of The Side Columns. Table Structure Formed By Two Parallel Side Columns In Industrial Steel Tube In Oblongular Shape Measuring 20Mm X 48Mm Joining The Base Structure Of The Top To The Feet. Base Of The Feet In Oblong Tubes Measuring 20Mm X 48Mm With A Thickness Of 1.5Mm In The Shape Of An Arc With A Radius Measuring A Maximum Of 800.0Mm. Non-Slip Calendered Shoes Enclosing The Ends Of The Tubes That Make Up The Feet, Performing The Function Of Paint Protection, Increasing Durability, Follow The Shape Of The Arched Feet, Measuring Approximately 162Mm X 53Mm And 100Mm Virgin, Which Can Be Injected In The Same Color As The Top And Attached To The Structure Using Screws. Individual Chair With Seat And Back In Injected Polypropylene, Certified According To Standard Abnt Nbr 14006/2008. Seat And Back In Virgin Polypropylene Copolymer, Free From Mineral Fillers, Injected. Fastening Using Non-Apparent Screws. Seat With Rounded Edges Contouring The Entire Piece, Covering The Base Of The Seat And In Contact With The Users Legs Fully Rounded To Avoid Hurting, Surface With A Minimum Thickness Of 4Mm, Measuring 340Mm In Width By 340Mm In Depth. Seat To Floor Height: 350 Mm (+/-10). Fastening Using Non-Apparent Screws. Enc, Reserved Quota 25%Trapeze Set In High Impact Plastic Resin. Set Composed Of 06 Tables, Measuring 340Mm Wide By 340Mm Deep. Seat To Floor Height: 350 Mm (+/-10). Fastening Using Screw, 2-Door Tall Cabinet, Measuring 800X500x1600mm Top Made Of Mdp, 25Mm Thick, Covered In Textured Low Pressure Melamine Laminate On Both Sides, Edges Finished In White Pp 3 Mm And In Other Colors It Is Ps 3 Mm Thick, Hot Glued By The Holt-Melt System. Box Entirely Made In Mdp, 18Mm Thick, Edges Finished In White Pp 0.7Mm And In Other Colors It Is Ps 0.7Mm Thick, Hot Glued Using The Holt-Melt System. Fastening System Using Pins, Plastic Bushings And Minifix. Configured With 3 Shelves Made Of Mdp, 7Mm And In Other Colors, 0.7Mm Thick, Hot Glued Using The Holt-Melt System, Supported By A Plastic Wedge Containing A Minifix Drum Inside, For Tightening The Minifix Fixed To The Side Of The Cabinet And A Steel Shelf Support, With The Option Of 3 Types Of Height For Each Shelf. 02 Doors Made In Mdp, Hot Glued Using The Holt-Melt System. Low Door Opening Hinges 110°. Polystyrene Handles With Holes Between Holes Of 128Mm, With Two 90° Bends Totaling A Height Of 25Mm And A Total Width Of 142Mm And Locking The Doors With A Single Lock. Use S
|
