Renovation Of Neuro Medicine Ward (Third Floor) To Proposed 05 Bedded Modular Burns Icu Ward At Government G ... in India

Work Detail

Renovation Of Neuro Medicine Ward (Third Floor) To Proposed 05 Bedded Modular Burns Icu Ward At Government General Hospital, Kakinada, Kakinada District-Dismantling, Clearing Away And Carefully Stacking Useful Materials For Re-Use And Disposal Of Unserviceable Materials With 100M Lead As Directed By Executive Engineer Duly Taking Actual Premeasurements Before Dismantling Including All Labour Charges , Overheads & Contractor Profit Etc., Complete Brick Masonry Dismantling, Clearing Away And Carefully Stacking Useful Materials For Re-Use And Disposal Of Unserviceable Materials With 100M Lead As Directed By Executive Engineer Duly Taking Actual Premeasurements Before Dismantling Including All Labour Charges , Overheads & Contractor Profit Etc., Complete Flat Stone In Roof Or Floors Including Lifting Dismantling Doors , Windows And Clear Storey Windows, Ventilators Etc., ( Wood Or Steel ) Shutters Including Chowkhats , Architraves,Hold Fasts And Other Attachments Etc., And Stacking Them Within 100M Lead Including Labour Charge Etc., And Overheads & Contractors Profit Complete For Finished Item Of Work Not Exceeding 3 Sqm Plain Cement Concrete (1:5:10) (Cement: Fine Aggregate: Coarse Aggregate) For Foundations And Under Flooring Bed Using Coarse Aggregate 40Mm Size Hard , Machine Crushed Granite From Approved Quarry Using Concrete Mixer 10 / 7 Cft (0.2 / 0.8 Cum) Capacity Including Cost And Conveyance Of All Materials Like Cement, Sand, Coarse Aggregate, Water Etc. To Site Including All Charges For Machine Mixing And Hire Charges Of Concrete Mixer, Laying Concrete In Foundations And Under Flooring Bed, Ramming In 15 Cm Layers Finishing Top Surface To The Required Level Curing Etc.,And Overheads & Contractors Profit Complete For Finished Item Of Work Brick Masonry For Panel Walls In Superstructure With Cm (1:8) Prop: (Cement : Sand) Using Common Burnt Clay Bricks Of Class As Per Table- I Of Is:1077-1992, Non- Modular Or Traditional Size 23 X 11 X 7 Cms From Approved Source Having Minimum Crushing Strength Of 40 Kg/Sqcm. Including Cost And Conveyance Of All Materials Like Cement, Screened Sand, Bricks, Water Etc., To Site, Labour Charges, Like Mixing Cement Mortar, Scaffolding Charges, Constructing Masonry, Lift Charges, Curing, Etc.,And Overheads & Contractors Profit Complete For Finished Item Of Work. Tf Plastering 12Mm Thick In Two Coats Using Screened Sand With Base Coat Of 8Mm Thick In Cm (1:6) And Top Coat Of 4Mm Thick In Cm (1:4) With Dubara Sponge Finishing Including Cost And Conveyance Of All Materials Like Cement, Sand, Water Etc., To Site And All Operational, Incidental Charges On Materials And Including Cost Of All Labour Charges For Mixing Mortar, Finishing, Scaffolding, Lift Charges, Curing, Including Cutting Grooves As Directed By Engineer - In - Charge Etc., And Overheads & Contractors Profit Complete For Finished Item Of Work. Tf Plastering 20Mm Thick In Two Coats Using Screened Sand With Base Coat Of 16Mm Thick In Cm(1:6) And Top Coat Of 4Mm Thick In Cm(1:4) With Dubara Sponge Finishing Including Cost And Conveyance Of All Materials Like Cement, Sand, Water Etc., To Site And All Operational, Incidental Charges On Materials And Including Cost Of All Labour Charges For Mixing Mortar, Finishing, Scaffolding, Lift Charges, Curing, Including Cutting Grooves As Directed By Engineer-In-Charge Etc., And Overheads & Contractors Profit Complete For Finished Item Of Work. Tf Flooring With Non-Skid Red Or White Full Body Ceramic Floor Tiles Of Size 300 Mm X 300 Mm And Thickness Between 7-8 Mm 1St Quality Conforming To Is:13711, Is:13712, Is:13630 (Parts 1 To 15) Of Any Colour And Finish In All Shades And Designs As Approved By Engineer-In-Charge, Set Over Base Coat Of Cement Mortar (1:8), 12Mm Thick Using Screened Sand Over Cc Bed Already Laid Or Rcc Roof Slab, Including Neat Cement Slurry Of Honey Like Consistency Spread @ 3.3 Kgs Per Sqm & Jointed Neatly With Epoxy Emulsion Grout/ Synthetic / Resin Adhesive In Width Of 3-5 Mm With Nylon Spacers To Full Depth Mixed With Pigment Of Matching Shade, Including Cost Of All Materials Like Cement, Screened Sand , Water And Tiles Etc., And Overheads & Contractors Profit Complete For Finished Item Of Work. Providing Dadooing With Glazed Red Or White Full Body Ceramic Wall Tiles Of Size 300 X 450 Mm / 320 Mm X 400 Mm And Thickness 6 Mm 1St Quality Conforming To Is:13711, Is:13712, Is:13630 (Parts 1 To 15) Of Any Colour And Finish In All Shades And Designs With Borders As Approved By Engineer-In-Charge Flushed To Wall Surface Set Over Base Coat Of Cm(1:5) 12 Mm Thick Using Screened Sand With Cement Slurry Of Honey Like Consistency Spread At The Rate Of 3.30 Kgs Per Sqm And Jointing With White Cement Paste Mixed With Pigment Of Matching Shade To Full Depth, Including Cost Of All Materials Like Tiles, Cement, Sand And Water Etc., And Overheads & Contractors Profit Complete For Finished Item Of Work. Granolithic Concrete Flooring 20 Mm Thick With (1:1:2), Using 6Mm To 12 Mm Size Hard Granite Machine Crushed Metal And Screened Sand Laid Over Cc Bed Already Laid Or Rcc Roof Slab, In Alternate Panels Of Size Not Exceeding 1.50 M X 1.50 M, Using Glass Strips And Finishing The Top Surface To Required Smoothness And Slopes And Thread Lining Including Cost Of All Materials Like Cement, Metal Sand And Water And Overheads & Contractors Profit Complete For Finished Item Of Work. Supply And Application Of Epoxy Flooring Of Light Green Or Light Blue Colour In Operation Theatres And Labour Rooms - Sika Epoxy Seamless Joint Free Finish With 3Mm Thickness And Anti Slip & Water Washable Chemical Resistance Durable And Non Particle Shedding With Attractive Finishing Including Cost And Conveyance Of All Materials And All Labour Charges, Overheads And Contractor Profit Etc., Complete For Finished Item Of Work In All Floors. Supply And Application Of Epoxy Coving With Sika Brand With 50Mmx50Mm Width At The Corners Of The All Walls In Operation Theatres, Labour Rooms Including Cost And Conveyance Of All Materials And Labour Charges, Overheads And Contractor Profit Etc., Complete For Finished Item Of Work . Providing And Applying Water Proof Wall Putty Of White Cement Or Polymer Or Cement Based Of Average 1 To 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth After Thoroughly Brushing The Surface To Remove All Dirt And Remains Of Loose Powdered Materials, Applying Emery Paper, Sand The Surface, Clean & Wipe Off Loose Dust, Applying Knifing Paste Filler By Putty Knife / Muslin Pad, Air Dry For 2 - 3 Hrs, Sand With 180 And 320 No., Emery Paper For The Surface Preparation, Applying One Coat Of Cement Primer Of Interior Grade-1 And Two Coats Of Poy-Urethane Paint (Mrf) Of Light Green Or Light Blue Colour With 1Mm Thickness With Anti Fungal And Anti Bacterial Chemical Resistance Durable And Non Particle Shedding Including Cost And Conveyance Of All Materials To Work Site And All Operational, Incidental, Labour Charges, Over Heads And Contractors Profit Etc., Complete For Finished Item Of Work In All Floors For Internal Walls And Ceiling Of Operation Theatre And Labour Rooms. Providing And Applying Wall Putty Of White Cement Or Polymer Or Cement Based Of Average 1 To 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth After Thoroughly Brushing The Surface To Remove All Dirt And Remains Of Loose Powdered Materials, Applying Emery Paper, Sand The Surface, Clean & Wipe Off Loose Dust, Applying Knifing Paste Filler By Putty Knife / Muslin Pad, Air Dry For 2 - 3 Hrs, Sand With 180 And 320 No., Emery Paper For The Surface Preparation Including Cost And Conveyance Of All Materials To Work Site And All Operational, Incidental, Labour Charges, Over Heads And Contractors Profit Etc., Complete For Finished Item Of Work In All Floors For Internal Walls Supply & Application Of One Coat Water Based Cement Primer Of Interior Grade I And Two Coats Of Synthetic Polymer Luxury Plastic Emulsion Paint Of Superior Grade Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/Litre For Internal Walls Including Cost And Conveyance Of All Materials To Site, Incidental, Operational And All Labour Charges Etc., And Overheads & Contractors Profit Complete For Finished Item Of Work In All Floors. Painting To Old Wood Work And Flush Shutters With Two Coats Of Synthetic Enamel Paint Grade-Ii Voc (Volatile Organic Compound) Content Less Than 50 Grams/Litre Of Approved Brand And Shade Including Cost And Conveyance Of All Materials To Site And All Labour Charges Etc. Complete And Overheads & Contractors Profit Complete In All Floors Providing And Fixing In True Horizontal Level 15 Mm - Mineral Fiber Ceiling Tile Of 595 X 595 (Square Edge Fissura Fine Model) Using Hot Dipped Galvanized Steel Section Exposed Surface With Pre-Coated Capping, Main Tee Of Size 24 X 32 Mm At Every 1200 Mm C/C Maximum And Rotary Stitched Cross Tee Of Size 24 X 27 Mm At Every 600 Mm C/C And Sub-Cross Tee Of Size 24 Mm X 25 Mm At 1200 Mm C/C And Wall Angle Of Size 19 X 19 Mm Fixed To Periphery Of The Wall And The Above Grid Is Suspended At Every 1200 Mm C/C In Both Directions Using 2.0 Mm Thick Pre-Straightened Gi Wire Including Cost And Conveyance Of All Materials And Labour Charges Such As Cutting , Fixing Of Standing Of Frame Work Exposing Roof Making, Overheads & Contractor Profit Etc., Complete For Finished Item Of Work In All Floor In All Floors. Providing And Fixing Factory Made Solid Wood Polymer Composite (Wpc) Single Extruded Door Frame Section Of Size With Encapsulation Of 8Mm Rigid Layer On All The Six Surfaces. The Door Frame Will Have A Rebat Of 32Mm. Door Frame Section Of 45X90 Mm . The Two Vertical Members Are To Be Joined Together With The Horizontal Member Using 8X60 Mm Long Ms Star Full Thread Screws To Be Used With Reverse Forward Speed Control Hand Drilling Machine. The Ready/Assembled Door Frame Is Fixed To The Wall Using Hold Fast Or Bolt Fasteners. A Minimum Of 4 No.S Of Screws To Be Provided For Each Vertical Member & Minimum 2No.S For Horizontal Member. Providing And Fixing 28 -30 Mm Thick Solid Wood Polymer Composite(Wpc) Single Extruded Door Shutter With 3Mm Top And Bottom Rigid Layer With An Overall Density Of 750Kg/Cum. It Will Be Fixed To The Frame Using 3 Inch /4 Inch Hinges. A Minimum Of 4 Hinges Will Be Required For Fixing The Door With The Frame Etc., Complete As Per Direction Of Engineer – In-Charge, Manufacture Specification And Drawing Including Isi Marked Aluminium Fixtures 3 Nos. Butt Hinges (Is:205) Of 150Mm Long, 1 No. Aldrop (Is:2681) 250 Mm Long, 1 No. Tower Bolt (Is:204) Of 150 Mm X 10Mm Dia, 2 Nos. 125Mm Long Handles (Is:208),1 No. Rubber / Nylon Door Stop Bushes Including Labour Charges For Fixing The Shutter To Frame Etc., Including Overheads & Contractors Profit Complete For Finished Item Of Work. Providing & Fixing Of Scientific Doors With Metal Door Frames And Door Shutters Made Of Galvanize Steel (Base Steel As Per Is 513 Of 0.58 Mm Thick D Quality, Galvanized As Per Is 277 With Zinc Of 120 Gsm). Coated With Zinc Phosphate Primer To Receive Any Paint On Site Or Finished With Thermosetting Polyurethane Paint Of Aliphatic Grade Providing High Levels Of Scratch Resistance And Durability/Epoxy Polyester Powder For Powder Coating Paint Thickness 50-60 Microns (Dry Film Thickness) Outer Frame Section Of 100 X 58 Mm X 1.2 Mm Thick, Shutter Section Of 0.80 Mm Thick Galvanized Steel Sheet Pressed (Roll Formed) For 46Mm Thick Fully Flush, Double Skin Door Shell Seam Joints At Stile Edges, In-Fill Of Honeycomb Kraft Paper Used To Give The Required Rigidity And Effective Acoustic Insulation With 6” Tower Bolt – 2 Nos., 6” D Handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 6 Nos, Mortise Lock Of Approved Quality – 1 No, Frames Fixed To The Concrete/Masonry Wall By Means Of Self Expanding Screws Including Overheads And Contractor Profit Etc., Complete For Finished Item Of Work For Double Leaf Door Providing And Fixing Factory Made Upvc White Colour Fixed Glazed Windows / Ventilators Comprising Of Upvc Multi Chambered Frame And Mullion (Where Ever Required) Extruded Profiles Duly Reinforced With 1.60± 0.2 Mm Thick Galvanized Mild Steel Section Made From Roll Forming Process Of Required Length (Shape & Size According To Upvc Profile), Upvc Extruded Glazing Beads Of Appropriate Dimension, Epdm Gasket,G.I Fasteners 100 X 8 Mm Size For Fixing Frame To Finished Wall, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profileof Frame Shall Be Mitred Cut And Fusion Welded At All Corners, Mullion (If Required) Shall Be Also Fusion Welded Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Required Size And Of Approved Quality, All Complete As Per Approved Drawing & Direction Of Engineer-In-Charge Inclusive Of Cost Of Single / Double Glass Panes And Silicon Sealant. Note: For Upvc Frame, Sash And Mullion Extruded Profiles Minus 5%Tolerance In Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable.Variation In Profile Dimension In Higher Side Shall Be Accepted. But, No Extra Payment On This Account Shall Be Made. Fixed Windows / Ventilators Made Of (Small Series) Frame 47 X 50Mm & Mullion 47 X 68 Mm Both Having Wall Thickness Of 1.9 ±0.2 Mm And Single Glazing Bead Of Appropriate Dimension. Supply And Fixing Of Modular Ot Wall And Ceiling Paneling: Wall & Ceiling With Ppg Panel Having 50Mm Thick With Puf (Polyurethane Foam) And Thickness Not Less Than 0.6 Mm Thick In Room Side And Of 40 Kg / M3. Including O F All Joints With Silicon Sealant. Make: Tata/ Jindal Wall Supply And Laying Of Coving Providing And Fixing Factory Made Upvc White Colour Casement/Casementcum Fixed Glazed Door Comprising Of Upvc Multi-Chambered Frame, Sashand Mullion (Where Ever Required) Extruded Profiles Duly Reinforced With 1.60 ± 0.2 Mm Thick Galvanized Mild Steel Section Made From Roll Formingprocess Of Required Length (Shape & Size According To Upvc Profile),Upvc Extruded Glazing Beads Of Appropriate Dimension,Epdmgasket,Zinc Alloy (White Powder Coated) 3D Hinges And One Handle Oneach Side Of Panels Along With Zinc Plated Mild Steel Multi Point Lockinghavingtransmission Gear, Cylinder With Keeps And One Side Key, G.Ifasteners100 X 8 Mm Size For Fixing Frame To Finished Wall And Necessarystainlesssteel Screws, Etc. Profile Of Frame & Sash Shall Be Mitred Cut Andfusion Welded At All Corners, Mullion (If Required) Shall Be Also Fusionweldedincluding Drilling Of Holes For Fixing HardwareS And Drainage Ofwater Etc.After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealent Over Backer Rod Of Required Sizeand Of Approved Quality, All Complete As Per Approved Drawing & Directionof Engineer-In-Charge Inclusive Of Cost Of Single / Double Glass Panes And Silicon Sealent . Note: For Upvc Frame, Sash And Mullion Extruded Profiles Minus 5%Tolerance In Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable.Variation In Profile Dimension In Higher Side Shall Be Acceptedbut No Extra Payment On This Account Shall Be Made. Casement Door With 3D Hinges Made Of (Big Series) Frame 67X 64 Mm & Sash 67 X 110 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Door Upto 2.00 Sqm). Supplying And Fixing Of 4 (101.6Mm) Multi Floor Trap With Jali - Upvc/Swr Pipe Fittings As Per Site Requirements With Standard Practice For All Floors Including Cost And Conveyance Of All Materials To Site, Labour Charges , Overheads & Contractors Profit Etc., Complete For Finished Item Of Work. Supplying And Fixing European Water Closet Of 1St Quality Conforming To Is:2556-Part-2-1973 Of White Glazed With S Trap,Supplying And Fixing Best Indian Make Plastic Seat And Lid For European Water Closets With Rubber Or Plastic Buffers As Per Is 2548-1996 And 10 Litres Capacity Single Flush Pvc Low Level Cistern With Internal Components And Fixed Using Required Size Of Nails And Screws, Angle Stop Cock 12.70Mm Dia. First Quality Indian Make Heavy Duty, 12Mm Pvc Connections With Brass Union Nuts Cp Coated Including Cost And Conveyance Of All Materials To Site, Overheads & Contractors Profit Etc., Complete For Finished Item Of Work For All Floors. Supplying And Fixing Indian Make Flat Back Wash Hand Basin 1St Quality Conforming To Is:2556-Part-4:1972 Of Size 550Mm X 400Mm With 32 Mm Nominal Size C.P. Fitting With Parallel Pipe Thread Conforming To Is:2963-1979 And Fitted With 15 Mm Nominal Bore Chromium Plated Pillar Tap Of 1St Quality Indian Make Heavy Duty Complete With Standard Ci Brackets Including Wooden Blocks ,1 No.12.70Mm Pvc Connection With Brass Union Nuts Cp Coated , Angle Stop Cock 12.70Mm Dia. First Quality Indian Make Heavy Duty, 31.75Mm Dia. Pvc Flexible Waste Pipe 914.4Mm Length Of 1St Quality Including Cost And Conveyance Of All Materials To Site, Labour Charges , Overheads & Contractors Profit For Finished Item Of Work Supplying And Fixing Np Soap Dish Heavy Type Of Approved Make Isi Quality With Np Screws Etc., Complete Including Cost And Conveyance Of All Materials, Labour Charges For Fixing , Overheads & Contractors Profit For Finished Item Of Work In All Floors Supplying And Fixing Tv Shape Mirror With Plastic Frame Of Size 609.6Mm X 457.2Mm , Plywood Back With Np Screws 1St Quality Including Cost And Conveyance Of All Materials, Labour Charges , Overheads & Contractors Profit For Finished Item Of Work In All Floors. Supplying And Fixing Of 25.4Mm Dia , 609.6Mm Long Aluminium Anodized Towel Rods With Brackets And Aluminium Screws Including Cost And Conveyance Of All Materials, Labour Charges , Overheads & Contractors Profit For Finished Item Of Work. Supplying And Fixing Np Bib Taps Of Size 12.70Mm Dia Of Indian Make Heavy Duty (Long Body) As Approved By The Engineer-In-Charge Including Cost And Conveyance Of All Materials, Labour Charges , Overheads & Contractors Profit Complete For Finished Item Of Work In All Floors. Supplying And Fixing Of Swr Pvc Pipes (Prince/Sudhakar/Kisan/Supreme Or Any Isi Brand) 4 Kg/Sq.Cm. And Fixing All Special Such As Plain Bends, Off Sets, Door Bends, Single Junctions, Double Junctions As Per Site Requirement, Fixing With Pvc Clamps If Necessary With Required Number Of Bombay Nails Including Cost And Conveyance Of All Materials To Site, Labour Charges, Overheads & Contractors Profit Complete For Finished Item Of Work At All Floor Levels. 75Mm Dia Supplying And Fixing Of Swr Pvc Pipes (Prince/Sudhakar/Kisan/Supreme Or Any Isi Brand) 4 Kg/Sq.Cm. And Fixing All Special Such As Plain Bends, Off Sets, Door Bends, Single Junctions, Double Junctions As Per Site Requirement, Fixing With Pvc Clamps If Necessary With Required Number Of Bombay Nails Including Cost And Conveyance Of All Materials To Site, Labour Charges, Overheads & Contractors Profit Complete For Finished Item Of Work At All Floor Levels. 110 Mm Dia Supply And Fixing Of Ashirvad/ Ajay/ Astral Flowguard Or Equivalent Cpvc Pipes And Fittings Sdr 11 To Meet The Requirement Of Astm-D 2846 And Are Produced In Cts (Copper Tube Sizes 1/2 To 2) For Hot And Cold Water (Is 15778:2007) Including Cost And Conveyance Of All Materials To Site, Labour Charges For Fixing, Overheads & Contractors Profit Complete For Finished Item Of Work At All Floor Levels. 15.90Mm Od Pipe Supply And Fixing Of Ashirvad/ Ajay/ Astral Flowguard Or Equivalent Cpvc Pipes And Fittings Sdr 11 To Meet The Requirement Of Astm-D 2846 And Are Produced In Cts (Copper Tube Sizes 1/2 To 2) For Hot And Cold Water (Is 15778:2007) Including Cost And Conveyance Of All Materials To Site, Labour Charges For Fixing, Overheads & Contractors Profit Complete For Finished Item Of Work At All Floor Levels. 28.60 Mm Od Pipe Supplying And Fixing Gunmetal Gate ( Gm Peet ) Valve As Per Is-778 Class - I , Indian Make Heavy Type Including Cost And Conveyance Of All Materials , Labour Charges , Overheads & Contractors Profit Complete For Finished Item Of Work. 25Mm Nominal Bore Supplying And Fixing Pvc Bib Cock Cum Health Fauset Of Size 12.70Mm Dia 1M Long Pipe As Approved By The Engineer-In-Charge Including Cost And Conveyance Of All Materials, Labour Charges , Complete For Finished Item Of Work In All Floors. Supplying And Fixing Np 12.7X 152.0 Mm Shower Rose Heavy Of Indian Make Heavy Duty As Approved By The Engineer-In-Charge Including Cost And Conveyance Of All Materials, Labour Charges , Overheads & Contractors Profit Complete For Finished Item Of Work In All Floors. Supply, Installation, Testing And Commissioning Of Double Skin Horizontal Floor Mounted Air Handling Unit Of Recirculation Type Having Mixing Box With Fresh Air & Return Air Manually Operated Al Dampers. Fresh Air Inlet Should Have Back Draft Dampers Along With Al Manually Operated Fresh Air Dampers. Units Shall Be With A Minimum Of 80Mm Gi Base Channel. The Panel Thickness Should Be 46+/-2Mm Having Thermal Break Al Profile. Outer Skin Of The Unit Should Be 0.6Mm Pre-Coated Gi Sheet & Inner Skin Should Be 0.8Mm Al. All Internal Blank Off Should Be Gi. Filter Section With 90% Efficiency Down To 10-Micron Pre Filter Box Type Followed By 95% Efficiency Down To 5-Micron Microvee Filter In A Separate Filter Frame. The Cooling Coil Section Should Be 6 Or 8 Row Deep Direct Expansion Intertwining Cooling Coil Compatible For Mitsubishi /Daikin/Toshiba/O General/ Blue Star/Hitachi/Carrier Outdoor Unit. Fin Thickness Should Be 0.15Mm & Fin Spacing Should Be 12 Fpi. Coil Casing Should Be Gi & Fin Shall Be With Standard Fin Material. Coil Shall Be 18G Ss-304 Drain Pan With 13Mm Thick Closed Cell Nitrile Rubber Insulations. Unit Shall Be Ultraviolet Lamp To Kill Germs/Fungus. The Heater Section Should Be With 4Kw Electric Strip Heater In 2 Banks. The Fan Section Should Be Sisw Direct Driven Plug Fan With A Minimum Efficiency Of 65%. Motors Should Be Ie-2, Tefc Squirrel Cage Induction Type With Ip-55 Protection, 415V, 3Phase & 50Hz. The Motor Drive Should Be Vfd. Vfd Drive Should Be Included In Ahu Supply. Fan Should Be Housed Over The Spring Isolator. Units Should Besupplied With Manually Operated Al Dampers. The Ahu Package Should Include Electronic Expansion Valves Compatible To Condensing Units, Temperature Sensor And Controller Compatible To Inverter Drive, Communication Cables From Ahu To Condensing Unit Etc., Including Cost Of All Accessories And All Labour 4400 Cfm, 4.5 Static Supply And Charging Of R410A Gas And Commissioning Lifting, Shifting, Positioning, Installation And Testing Of The Odus Including All Accessories With Vibration Isolators For Odus Etc., Complete Out Door Units 6 To 8 Hp Lifting Shifting, Positioning ,Installation Testing And Commissioning Of The Following Indoor Units With Including All Required Accessoires Etc Complete., Type Of Units :Round Flow /4 Way Cassette Units 5.5 Tr To 8.0 Tr Supply, Installation And Testing Of The Following Sizes Of Refrigerant Piping Consisting Of Copper Tubes Of Wall Thickness 20G/22G Inclusive Of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, With Class O Nitrile Rubber Insulation With Finish As Required.The Piping To Be Mounted & Supported Properly With Suitable Size Of Clamp,M.S. Hanger, Tray Etc., As Required At Sitemakes:Totaline/Mandav/Mexico.The Insulation Shall Be Closed Cell/Cross Linked Elastomeric Nitrile Rubber Of Thickness 13/19 Mm.The Insulation Thickness Upto 19.1 Mm Dia Pipe Shall Be 13 Mm And Above 19.1 Mm Dia, The Insulation Thickness Shall Be 19 Mm.Testing Of Refrigerant Piping And Procedure Shall Be Done As Per ManufacturerS Recommendations Makes:Totaline/Mandav/Mexico Insulation: Kflex/ Totaline /Armaflex/Aerofoam/Cani 28.60Mm Supply, Installation And Testing Of The Following Sizes Of Refrigerant Piping Consisting Of Copper Tubes Of Wall Thickness 20G/22G Inclusive Of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, With Class O Nitrile Rubber Insulation With Finish As Required.The Piping To Be Mounted & Supported Properly With Suitable Size Of Clamp,M.S. Hanger, Tray Etc., As Required At Sitemakes:Totaline/Mandav/Mexico.The Insulation Shall Be Closed Cell/Cross Linked Elastomeric Nitrile Rubber Of Thickness 13/19 Mm.The Insulation Thickness Upto 19.1 Mm Dia Pipe Shall Be 13 Mm And Above 19.1 Mm Dia, The Insulation Thickness Shall Be 19 Mm.Testing Of Refrigerant Piping And Procedure Shall Be Done As Per ManufacturerS Recommendations Makes:Totaline/Mandav/Mexico Insulation: Kflex/ Totaline /Armaflex/Aerofoam/Cani 15.90 Mm Supply And Transportation Of Air Cooled Vrv/ Vrf Air Conditioning System Of Having High Cop Complete With Indoor And Outdoor Units Duly Charged With Refrigerant R- 410A And Oil (First Charge) Suitable For Cooling With Individual Controller, (Suitable For 415 +/ - 10% For Outdoor And 230 +/ - 5% For Indoor Units) And Complete With All Accessories, Fittings Etc. The Units Shall Be Bms Compatible. Outdoor Units Shall Be Fully Inverter System Complete With 100% Scroll/ Rotary Compressor And Drive Arrangement, Initial Charge Of Refrigerant (R410A), Refrigerant Piping, Drier, Sight Glass, Dual Pressure Cutout All Housed And Supported Properly In Cabinet, Air Cooled Condenser & Its Controller For Following Capacities.The Vrvsystem Shall Be Cooling Only System And With Copper Condensing Units. Makes: Mitsubishi / Daikin/ Toshiba/ O General/ Blue Star/ Hitachi/ Carrier. Outdoor Compressor & Condenser Units - Vrv/Vrf Type With Top Discharge 6 Hp Out Door Unit Supply And Installation Of Multi Connection Joint / Ref Nets For Triple Odu Connections- At Out Door Units Ducting Supply, Installation, Testing & Commissioning Of The Following Sizes Of Gss Ducting With Required Angle Flanges & Installation Materials Such As Heavy Duty Supports By Anchor Fasteners Etc As Required Asper Is 655 /Smacna Standards Makes:Tata/Jindal 24 Swg Supply, Installation, Testing & Commissioning Of The Following Sizes Of Gss Ducting With Required Angle Flanges & Installation Materials Such As Heavy Duty Supports By Anchor Fasteners Etc As Required Asper Is 655 /Smacna Standards Makes:Tata/Jindal 22 Swg Supply, Installation And Testing Of Canvas Connection For The Treated Fresh Air Units To The Duct Supply & Fixing Of Duct Accoustic Insulation Applied Inside Of The Duct Work With All. Backed Open Cell Nitrile Duly Fixed With Adhesive And Tapes 10/15Mm Thick Supply & Fixing Of Duct Thermal Insulation Applied Outside Of The Duct Work With All. Backed Closed Cell Nitrile/ Cross Linked Foam Duly Fixed With Adhesive And Tapes. 13Mm Thick Supply, Installation, Testing And Commissioning Of Extruded Aluminum Powder Coated Grills/ Diffusers For Supply With Removable Core Type With Collar Damper Supply, Installation, Testing And Commissioning Of Extruded Aluminum Powder Coated Grills/ Diffusers For Retrun With Removable Core Type Without Collar Damper. Supply , Erection And Testing Of Gi Opposed Blade Volume Control Dampers Made Out Of 18G Frame And 20G Blades Supply, Transportation And Laying Of 3 Core, 2.5 Sq.Mm Xlpe/Pvc Insulated & Pvc Sheathed Unarmoured Control Cables Of 1.1 Kv Grade With Copper Conductor As Per Is 7098 Part-I -1988 In The Existing Pvc Conduit Including All Labour Charges, Giving Connections Etc., Complete. Make: Torrent / Universal / Unicab / Havells / Kei /Polycab/Gloster /Orbit / Paragon/ Rr Kabel/ Rpg/Pawancab/Ls Cable Supply And Fixing Of 25Mm Outer Dia (1.60 To 1.80)Mm Thicknes Medium Grade With Is:9537 Part 3 Frls Rigid Surface P.V.C. Pipe (Isi Marked) On Wall With All Required Pvc Junction Boxes Confirms To Is : 3419 And All Accessories Fixing On Chromium Plated Metallic Base Saddles For Run Of Mains Including All Labour Charges Etc., Complete. Including All Labour Charges Etc., Complete. Makes: Precision/Universal& Marudhar/Vip / Goldmedal / Million Plast / Gm / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/Akg/Beljin/Vasavi/Dec Supply And Fixing Of Vtpn Db, 8 Way Vertical Type Mccb Distribution Board With Ip-43 Protection And As Per Is 8623; Is 13032; Iec 61439-3, Suitable To Accommodate Mccb As Incomer And Single/Three Pole Mcbs As Outgoings With 125A, 4 Pole Mccb Adjustable, Confirms To Iec 60947-2 And Is 13947-Part 1&2 Having Breaking Capacity 25 Ka With Thermal Magnetic Release As Incomer With 8 No Of 40/63A, 10 Ka Tp Mcbs C Curve And 3 No, 6-32A, 10 Ka Sp Mcbs C Curve As Outgoing Including Making Connections And Labour Charges Etc., Complete On Wall. Makes: Legrand(Ekinox 3) / Schneider-A9/Hager - Novello+/ Seimens/Havells Stadx/ Lauritz Knudsen (Formerly L&T)-Newrange/Indo Asian-Opti Pro/ Hpl (Techno)/ Anchor (Uno Plus) Wiring With 2 Runs Of 22/0.3Mm ( 1.5 Sq.Mm) Frls / Frlsh / Hffr / Zhfr P.V.C. Insulated 1100V Grade As Per Is : 694 / 1990 Specification Flexible Copper Cable (Isi Marked) In Existing Pipe With 6A Modular Switch (Isi Marked) With Cover Plate, Ceiling Rose/Bh/ Sbh, Including All Labour Charges Etc., Complete For Light, Bell, Fan And Exhaust Fan Points Etc., Complete. (For Non Residential Building). Makes: Finolex / Rr Kabel / Havells/Finecab/ Ei/Polycab/Gloster/Goldmedal/Gm/ Fortune Arrt/Anchor/Million/ Apar(Anushakthi) Supply And Fixing Of 6 Amps Modular Type (Isi Marked) Switch, And 6 A 3/2 Pin Modular Type Socket With Cover Plate On A Common Switch Board Including Giving All Connections And All Labour Charges Etc., Complete. Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia Ab)/ Crabtree (Murano/Athena)/Lauritz Knudsen-Englaze (Formerly L&T)/ Gm-(Four-Five)/ Goldmedal(Gifa)/Million (M-Vee)/Anchor (Roma Plus)/Precision(Series7)/Honeywell(Blenzepro) Supply And Fixing Of Of 16A/6A, 2 In One, Modular Type Power Socket Outlet With 16A Switch (Isi Marked) Modular Type And 2 No Of 6A Modular Type Sockets With 6A Modular Type (Isi Marked) Switch Control With Front Cover Plate On Existing Modular Metal Switch Box Including All Labour Charges, Giving All Connections Etc., Complete With Following Configurations 1) 16A Socket - 2 No 2) 16A Switch - 2 No 3) 6A Socket - 2 No. 4) 6A Switch - 2 No Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia Ab)/ Crabtree (Murano/Athena)/Lauritz Knudsen-Englaze (Formerly L&T)/ Gm-(Four-Five)/ Goldmedal(Gifa)/Million (M-Vee)/Anchor (Roma Plus)/Precision(Series7)/Honeywell(Blenzepro) Supply And Fixing Of Of 16A/6A, 2 In One, Modular Type Power Socket Outlet With 16A Switch (Isi Marked) Modular Type And 1 No Of 6A Modular Type Sockets With 6A Modular Type (Isi Marked) Switch Control With Front Cover Plate On Existing Modular Metal Switch Box Including All Labour Charges, Giving All Connections Etc., Complete With Following Configurations 1) 16A Socket - 1 No 2) 16A Switch - 1 No 3) 6A Socket - 1 No. 4) 6A Switch - 1 No Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia Ab)/ Crabtree (Murano/Athena)/Lauritz Knudsen-Englaze (Formerly L&T)/ Gm-(Four-Five)/ Goldmedal(Gifa)/Million (M-Vee)/Anchor (Roma Plus)/Precision(Series7)/Honeywell(Blenzepro) Supply And Run Of 1 Of 22 /0.3Mm (1.5 Sq.Mm) Frls / Frlsh / Hffr / Zhfr P.V.C. Insulated 1100V Grade As Per Is : 694 / 1990 Specification Flexible Copper Cable In Existing Pipe For Earth Continuity Including All Labour Charges Etc., Complete. Makes: Finolex / Rr Kabel / Havells/Finecab/ Kei/Polycab/Gloster/Goldmedal/Gm/ Fortune Arrt/Anchor/Million/ Apar(Anushakthi) Supply And Run Of 3 Of 2.5 Sq.Mm (Phase Neutral And Earth) Frls / Frlsh / Hffr / Zhfr P.V.C. Insulated 1100V Grade As Per Is : 694 / 1990 Specification Flexible Copper Cable In Existing Ms Conduit Pipe For Individual Ligting Circuits Including Labour Charges Etc., Complete As Required For Switch Boards. Makes: Finolex / Rr Kabel / Havells/Finecab/ Kei/Polycab/Gloster/Goldmedal/Gm/ Fortune Arrt/Anchor/Million/ Apar(Anushakthi) Supply And 3 Runs Of 4.0 Sq Mm (Phase Neutral And Earth) Frls / Frlsh / Hffr / Zhfr P.V.C. Insulated 1100V Grade As Per Is : 694 / 1990 Specification Flexible Copper Cable In Existing Conduit Pipe For Run Of Mains Including Labour Charges Etc., Complete As Required Including Labour Charges For 16A Sockets. Makes: Finolex / Rr Kabel / Havells/Finecab/ Kei/Polycab/Gloster/Goldmedal/Gm/ Fortune Arrt/Anchor/Million/ Apar(Anushakthi) Supply & Run Of 3 Of 6.0 Sqmm (84/0.3Mm) (Phase Neutral And Earth) Frls / Frlsh / Hffr / Zhfr P.V.C. Insulated 1100V Grade As Per Is : 694 / 1990 Specification Flexible Copper Cable In Existing Ms Conduit Pipe For Run Of Mains Including Labour Charges Etc. Complete For Ac Points & SdbS Etc As Required. Makes: Finolex / Rr Kabel / Havells/Finecab/ Kei/Polycab/Gloster/Goldmedal/Gm/ Fortune Arrt/Anchor/Million/ Apar(Anushakthi) Supply And Run Of 5 Of 6 Sq Mm (Phases, Neutral And Earth) Frls / Frlsh / Hffr / Zhfr P.V.C. Insulated 1100V Grade As Per Is : 694 / 1990 Specification Flexible Copper Cable In Existing Ms Conduit Pipe For Circuits Including Labour Charges Etc. Complete As Required For Run Of Mains From Lighting Panel Board To Tpn DbS With Pin Type Lugs And Connections. [For Ldbs] Makes: Finolex / Rr Kabel / Havells/Finecab/ Kei/Polycab/Gloster/Goldmedal/Gm/ Fortune Arrt/Anchor/Million/ Apar(Anushakthi) Supply & Run Of 5 Of 10.0 Sqmm (Phases, Neutral And Earth) Frls / Frlsh / Hffr / Zhfr P.V.C. Insulated 1100V Grade As Per Is : 694 / 1990 Specification Flexible Copper Cable In The Existing Conduict Pipe For Run Of Mains From Power Panel Board To Tpn DbS With Pin Type Lugs And Connections Etc., Complete. [For Pdbs] Makes: Finolex / Rr Kabel / Havells/Finecab/ Kei/Polycab/Gloster/Goldmedal/Gm/ Fortune Arrt/Anchor/Million/ Apar(Anushakthi) Supply And Fixing Of Tpn 4 Way Distribution Board With Ip-43 Protection And As Per Is 8623; Is 13032; Iec 61439-3, (8+12 Module) With Provision To Accommodate The Elcb Incomer And Suitable For Single Pole Outgoing McbS In Sheet Steel Enclosure With 63A, 10 Ka Breaking Capacity C Curve 4 Pole Mcb As Incomer And 12 No Of 6 To 32A, Single Pole, 10 Ka Breaking Capacity C Curve Mcbs As Outgoings Including Making Connections Etc., Complete On Wall. (Lighting Db). Makes: Legrand (Ekinox 3) / Schneider-A9/Hager - Novello+/ Seimens/Havells Stadx/ Lauritz Knudsen (Formerly L&T)-Newrange/Indo Asian-Opti Pro/ Hpl (Techno)/ Anchor (Uno Plus) Supply And Installation Of 63A Fp, Mccb, 25Ka On Wall With Suitable Sheet Steel Enclosure With Cable End Boxes Including All Labour Charges Etc Complete With Connections. Makes: Lauritz Knudsen (Formerly L&T)- D Shine / Schneider-Cvs/Legrand –(Dp X3/Drx)/ Siemens3Vl / Hager-H3/C&S -Winbreak/Hpl-Techno Providing Independent Earthing For Important Equipment With 40Mm Dia B Class 2.5M Long G.I Pipe And 19Mm Dia B Class G.I Pipe Of 0.3Mtr. Long Connected With Reducer Providing G.I Funnel With Mesh Enclosed In C.C.Chamber Of 400M X 400M X 400Mm With R.C.C. Slab Cover Duly Providing Staggered Holes Filling With Salt And Charcoal From The Bottom Of The Pipe Giving Earth Connection From Electrode Through G.I Strip Of 40 X 6Mm X 200Mm Length With All Accessories And Labour Charges Complete, As Per Is Specifications 732/1982 (Part Ii) Providing Independent Earthing For Sophisticated Electronic Equipment With 600Mm X 600Mm X 3.15Mm Thick Copper Plate Rigidly Fixed To 40Mm Dia G.I Pipe Of 2.5 Mtr Length Connected With Reducer Providing G.I Funnel With Wiremesh As Per National Electric Code Including C.C.Chamber Of Size 400M X 400M X 400Mm Covered With R.C.C. Slab Filling With Salt And Charcoal Giving Earth Connection From Electrode With Copper Strip Of 25Mm X 5Mm X 200Mm Length To Be Bolted With Nut Bolts To G.I.Pipe Including 25Mm X 3Mm Copper Strip Of 6Mtrs Length Connected From Plate To Copper Strip With All Accessories And Labour Charges Complete As Per Is Specification 732/1982 (Part Ii). Supply And Run Of 25Mm X 3Mm G.I Strip Including Cost Of All Accessories And Labour Charges Etc., Complete. Supply And Run Of No. 8 Swg Copper Wire Including Cost Of All Accessories And Labour Charges Etc., Complete. Supply And Run Of 25Mm X 3Mm Copper Strip Including Cost Of All Accessories And Labour Charges Etc., Complete. Supply And Fixing Of Heavy Duty 18 W Led Down Lighter, Suitable For Recessed/Surface Mounting Made Of Diecast Alluminium Body With Powder Coating, Acrylic Diffuser With Driver As Per Is: 15885 (Part 2/ Sec 13) : 2012 , Operating Voltage Range Of 150 To 265 Volts Ac, P.F > 0.9, Surge Protection: 2Kv, Thd<10% With High Power LedS Having Efficacy Of > 120 Lumens / Watt, Cct: 3000K - 5700K, Minimum Cri > 70, Luminaire Performance Complies To Is 10322 (Part 5 / Sec-3) Etc., Complete Including Fixing In The Ceiling With Recessed/Surface Mounting, Cost Of All Accessories And Giving Connections Etc., Complete With 5 Years Warranty. Make: A) Luminaire Make : Phillips / Ge-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/Hpl/Gm / Greenlites / Gold Medal/Eveready/ Fortunearrt/ Rhino/Panasonic B) Led Make : Philips Lumileds / Cree / Nichia / Osram / Samsung/Everligh Supply, Transportation And Fixing Of 36W Recessed/Surface Mounting 2 X 2 (600X 600 Mm) Led Luminaire Made Of Crca Sheet Housing With Powder Coated With Acrylic Diffuser, Constant Current Driver As Per Is: 15885 (Part 2/ Sec 13) : 2012 , With System Lumen Output = 3200Lm Operating Voltage Range Of 150 To 265 Volts Ac, P.F > 0.9, Surge Protection: 2Kv, Thd<10%, With High Power LedS Having Efficacy Of > 120 Lumens / Watt, Cct: 3000K - 5700K, Minimum Cri>70 Etc., Complete Including Fixing In The Ceiling With Recessed/Surface Mounting, Cost Of All Accessories And Giving Connections Etc., Complete With 5 Years Warranty. A) Luminaire Make : Phillips / Ge-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/Hpl/Gm / Greenlites / Gold Medal/Eveready / Fortunearrt// Rhino/Panasonic B) Led Make : Philips Lumileds / Cree / Nichia / Osram / Samsung/Everlight Supply And Transportation Of 3.5 Core, 70 Sq.Mm Xlpe Insulated, 1100V Grade Armoured Alluminium Cable As Per Specification Confirming To Is:7098 (Part-I)/1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / Kei / Gloster/ Polycab /Rr Kabel/ Fortune Arrt Labour Charges For Run Of U.G Cables From 70 To 300 Sqmm On Wall With Necessary Fixing Arrangments Such As Saddles, Clamps Etc., As Directed By Department Including Cost And Conveyance Of All Materials Etc., Complete. Supply And Fixing Gas Outlet Points For Oxygen / Air / Vaccum With S Brackets, Self Ceiling Bross Valves / Din Type Outlets With Nut And Cap And It Shuld Be 100% Self Sealing Type , So That At The Time Of Removal Of Probe, It Shuld Stop Gas Flow Automatically, Out Let Shuld Be Single Hand Insertion, Non Inter Changeable For Specific Gas, It Should Accept Only Correct Medical Gas Adapter. With Down Tube Of The Specific Gas Should Be Brazed With Brass Bracket Of The Outlet, There After Brass Bracket Should Be Fixed In Wall With The Help Of The Steel Screw, With Self Sealing Valve Which Should Be Screwed With The Front Portion Of Brass Bracket And There After It Should Be Covered By Plastic Cover Duly Colour Coded As Per Specific Gas, Design Of Outlet Should Be Such That It Can Be Installed Vertically On Wall, Horizontally On Iccu Panel And Also Vertical To Fit In Pendants Including Cost And Conveyance Of All Materials, Errection Charges, Commissioning Charges And All Other Labour Charges Etc, Complete For Finished Item Of Work. Supply And Fixing Of Isolation Valves With Necessary Brass End Fittings Designed For A Working Pressure Of 300 Psi / 27 Inc. Hg. Vacuum, Non Ferrous, Non Lubricated With 90 Degrees Turn, Hand Lever Operated Of Standard Make Of Valves Including Cost And Conveyance Of All Materials, Taxes, Transportation Charges, Fixing Charges And Testing Charges And All Labour Charges Etc. Complete For Finished Item Of Work. Makes: Ibp Conex, Maxflow 15Mm Valve Supply And Fixing Of Isolation Valves With Necessary Brass End Fittings Designed For A Working Pressure Of 300 Psi / 27 Inc. Hg. Vacuum, Non Ferrous, Non Lubricated With 90 Degrees Turn, Hand Lever Operated Of Standard Make Of Valves Including Cost And Conveyance Of All Materials, Taxes, Transportation Charges, Fixing Charges And Testing Charges And All Labour Charges Etc. Complete For Finished Item Of Work. Makes: Ibp Conex, Maxflow 22 Mm Valve Supply And Fixing Of Consisting Of All Digital Alarms Necessary Accessories Iepressure Sensors, Regulators, Pressure Swgs Etc. Complete Includingcost And Conveyance Of All Materials, Taxes, Transportation Charges Etc.Completefor Finished Item Of Work. Makes: Ibp Conex, Maxflow As Per List Of Recommended Brands Supply And Fixing Of Ward Vacuum Units With 600Ml Jar. Makes: Aktiv Technologies// Atlas Capco/ Draeger Medical/ / Airox Technologies / Aastha Medical Technologies/ Gmp Technical Solutions / Medicare Gas Pipe Line/Mediline Engineers Supply And Fixing Of Hp ( High Pressure ) Tube. Makes: Aktiv Technologies// Atlas Capco/ Draeger Medical/ / Airox Technologies / Aastha Medical Technologies/ Gmp Technical Solutions / Medicare Gas Pipe Line/Mediline Engineers Supply And Fixing Of Oxygen Flow Meters With Humidifier Bottles. Makes: As Per List Of Recommended Brands Including Cost And Conveyance Of All Materials, Taxes, Transportation Charges, Fixing Charges And Testing Charges And All Labour Charges Etc. Complete For Finished Item Of Work. Makes: As Per List Of Recommended Brands. Supply And Fixing Of Copper Pipe Thick For Distribution, Pipes Shall Be Half Drawn, Tempered, Seamless, Phosphorous Deoxidized, Non Arsenic And Decreased Confirming To Bs 2871-1971 Part-1 (Table-X) And The Chemical Compositions Shall Be As Per Bs 6017 Of 1981 Table-2 With Lloyd Test Certification, Including Cost And Conveyance Of Pipes, Cost Of Necessary Specials Made Of Copper And Suitable For A Steam Working Pressure Of 17 Bar And Should Confirm To Bs 864 With Specially Made For Brazed Socket Type Connections, Including Taxes, Transportation Charges Including Laying And Jointing, Testing, Commissioning And All Other Labour Charges Etc. Complete For Finished Item Of Work. Makes: Ibp Conex, Maxflow 12Mm Od X 0.7Mm Supply And Fixing Of Copper Pipe Thick For Distribution, Pipes Shall Be Half Drawn, Tempered, Seamless, Phosphorous Deoxidized, Non Arsenic And Decreased Confirming To Bs 2871-1971 Part-1 (Table-X) And The Chemical Compositions Shall Be As Per Bs 6017 Of 1981 Table-2 With Lloyd Test Certification, Including Cost And Conveyance Of Pipes, Cost Of Necessary Specials Made Of Copper And Suitable For A Steam Working Pressure Of 17 Bar And Should Confirm To Bs 864 With Specially Made For Brazed Socket Type Connections, Including Taxes, Transportation Charges Including Laying And Jointing, Testing, Commissioning And All Other Labour Charges Etc. Complete For Finished Item Of Work. Makes: Ibp Conex, Maxflow 15Mm Od X 0.9Mm Supply And Fixing Of Copper Pipe Thick For Distribution, Pipes Shall Be Half Drawn, Tempered, Seamless, Phosphorous Deoxidized, Non Arsenic And Decreased Confirming To Bs 2871-1971 Part-1 (Table-X) And The Chemical Compositions Shall Be As Per Bs 6017 Of 1981 Table-2 With Lloyd Test Certification, Including Cost And Conveyance Of Pipes, Cost Of Necessary Specials Made Of Copper And Suitable For A Steam Working Pressure Of 17 Bar And Should Confirm To Bs 864 With Specially Made For Brazed Socket Type Connections, Including Taxes, Transportation Charges Including Laying And Jointing, Testing, Commissioning And All Other Labour Charges Etc. Complete For Finished Item Of Work. Makes: Ibp Conex, Maxflow 22 Mm Od X 0.9Mm ( Rupees Thirty Seven Lakhs Twenty Seven Thousand And Thirteen Only )

Contact Information