|
Supply And Placement Of Engineering Services Sign In Galvanized Sheet 3.00 Horizontal, In Relation To The Dimensions Of Each Piece, Of 20 Cm - Cubic Meters Item Remunerates The Supply Of The Necessary Labor For Manual Excavation In First And Second Category Soil In Trenches Or Pits Up To 2.00 M Deep, Leveling The Bottom Of The Trench With Piling With A 30 Kg Mallet Will Be Measured By The Bottom Area Of The Trench Square Meters Item Remunerates The Supply Of Equipment And Labor Necessary To Carry Out Trench Bottom Regularization Services With A 30 Kg Bundle, Steel Reinforcement, Ca 50, Cutting And Bending On Site. It Will Be Measured By The Nominal Weight Of The Gauges Contained In The Reinforcement Project. 500 Mpa, Bending, Transport And Placement Of Reinforcements Of Any Gauge And Any Length Are Included In The Item Services And Secondary Materials Such As Wire, Spacers, Losses Due To Misalignment, Cuts And Crossing Ends For Splices., Wooden Formwork For Foundation, With Boards And Battens, 3 Uses And Deformation Will Be Measured By The Development Of The Areas In Contact With The Concrete, Not Discounting Intersection Areas Up To 0.20 Square Meters - Square Meters. The Item Remunerates The Supply Of Materials And Labor For Execution And Installation Of The Formwork, Including Props, Ties, Release Agent And Formwork., 03/20/2026 - 13:25:55, 03/20/2026 - 13:25:58, 03/20/2026 - 13:26:01, 03/20/2026 - 13:26:04, 03/20/2026 - 13:26:13, Structural Concrete Turned On Site, Control A, Vibration Consistency, Brita 1, Fck=20 Mpa And Foundation Laying. It Will Be Measured By The Volume Calculated In The Form Project, And The Volume Of The Intersection Of The Various Structural Elements Must Be Computed Once In Cubic Meters. Mpa. It Also Pays For Transportation, Laying And Consolidation., Waterproofing Of Concrete Footings Or Basement Masonry With Application Of Bituminous Paint. Execution Of Painting With Bituminous Paint In Two Coats On The Entire Side Baldrame And Upper Part. It Also Pays For The Necessary Cleaning To Apply The Paint., Fence Masonry With Concrete Block, 19X19x39 Cm, Wall Thickness 19 Cm, 10Mm Joints With Mixed Mortar Of Cement, Lime And Sand Without Sifting Trace 1:0, 5:8 Will Be Measured Per Surface Area Executed, Minus All The Spans Are Square Meters. The Item Remunerates The Supply Of Materials And Labor Necessary For The Execution Of Fencing Masonry To Be Covered, Made From A Hollow Block Of Simple Concrete, With A Rough Surface To Guarantee The Adhesion Of The Coating, Laid With Cement Mortar, Hydrated Lime And Sand, Standardized Dimensions Of 19 X 19 X 39 Cm, And Minimum Resistance To Compression According To Color
|
