|
1.1.1.0.1. Supply And Installation Of Construction Plate With Galvanized Sheet Metal And Wooden Structure. Af_03/2022_Ps, 1.1.2.0.1. Mobilization Of Work In Urban Center, 1.1.3.0.1. Gate For Fixed Protective Siding With Closure Of Galvanized Metal Tile, Trapezoidal Type Esp.0, 5Mm, With Module Size Of (300X220)Cm, Exclusive Enamel Painting, 1.1.3.0.2. Siding With Metal Tile. Af_03/2024, 1.1.3.0.3. Construction Shed, Made Of Resin Plywood, Including Sanitary Facilities And Furniture - Der-Mg Standard, 03/19/2026 - 10:40:26, 1.1.4.0.1. Temporary Water Connection For Site, Including Hydrometer And Easel For Water Measurement - Main Entrance, In Galvanized Steel Dn 20Mm (1/2) - Dealership Standard, 1.1.4.0.2. Sewer Connection For Construction Shed On Site, Excluding Septic Tank, 1.1.4.0.3. Temporary Connection With Overhead Power Input, Cemig Standard, Installed Load From 15.1Kva To 30Kva, Three-Phase, With Underground Output, Including Pole, Meter Box, Circuit Breaker, Bus Bar, Grounding And Accessories, 1.1.5.0.1. Construction Management Team, 1.1.6.0.1. Lease With Easel With Height Of 1.00 M - 2 Uses. Af_03/2024, 1.2.1.1.1. Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_01/2024, 1.2.1.1.2. Mechanical Soil Compaction For Execution Of Radier, Concrete Floor Or Slab On Soil, With Percussion Soil Compactor. Af_09/2021, 1.2.1.1.3. Separating Layer For Execution Of Radier, Concrete Floor Or Slab On Ground, In Plastic Tarpaulin. Af_09/2021, 1.2.1.1.4. Ballast With Granular Material, Applied On Floors Or Slabs On Ground, Thickness Of *5 Cm*. Af_01/2024, 1.2.1.1.5. Manufacture, Assembly And Disassembly Of Formwork For Radier, Concrete Floor Or Slab On Ground, In Sawn Wood, 4 Uses. Af_09/2021, 1.2.1.1.6. Conventional Reinforced Concrete Structure Slab Frame Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, 1.2.1.1.7. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10.0 Mm Ca-50 Steel - Montagem.Af_06/2022, 1.2.1.1.8. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5 Ca-60 Steel, 1.2.1.1.9. Concreting Of Radier, Concrete Floor Or Aboveground Slab, Fck 20 Mpa - Laying, Densification And Finishing., 1.2.1.1.10. Manual Trench Backfilling, With Percussion Soil Compactor. Af_08/2023, 1.2.1.2.1. Surface Waterproofing With Polymeric Mortar / Acrylic Membrane, 3 Coats. Af_09/2023, 1.2.1.2.2. Polyester Veil For Waterproofing, 1.3.1.0.1. Assembly And Disassembly Of Rectangular Pillar Formwork And Similar Structures, Simple Straight Leg, Made Of Resin Plywood Sheet, 8 Uses. Af_09/2020, 1.3.1.0.2. Assembly And Disassembly Of Beam Formwork, Semi-Shoring, In Resin Wood Sheet, 8 Uses., 1.3.1.0.3. Assembly And Disassembly Of Beam Formwork, Shoring With Wooden Fork, In Resin Wood Sheet, 1.3.1.0.4. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-60 Of 5, 1.3.1.0.5. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Montagem.Af_06/2022, 1.3.1.0.6. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 8, 1.3.1.0.7. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 10, 1.3.1.0.8. Unidirectional Precast Slab
|
