|
Detachable Plastic Easel, Made Of Low-Density Polyethylene, With Protection Against Uv Rays, Resistant To Weather (Sun And Rain), 1.03 M High X 1 M Long X 100 Cm Wide, Reasonable Variation Allowed. It Has 2 17 Cm Wide Beams, With Highly Visible Reflective Adhesive, And A Recess For Their Protection, On Both Sides Of The Piece. It Has A Top Hole For Fitting An External Warning Light (Night Light). Use In Restricted Areas And Emergency Signage., Horizontal Reflective Accordion/Retractable Pantographic Barrier, In Orange Color, 6.4M, Reasonable Variation Allowed. Protection Against Uv Rays. It Has 28 Reflective Strips And Comes With Side Straps For Transportation. Plastic Barrier Made From Low-Density Polyethylene, Weather-Resistant, Minimum 0.55 High X 1M Long X 0.50 Wide, Reasonable Variation Allowed. With Reflective Adhesive, High Visibility, With Two Sides Of The Piece. It Must Have A Top Hole For Fitting Internal And External Warning Lights (Night Lights) And 2 Handles On The Top For Easy Transport. With Pins On The Piece Itself To Interconnect Them. It Must Have Sand Drawers (Included) To Be Attached To The Inside Of The Base. Orange Color With White Reflective., Super Cone Barrel, Manufactured In Low-Density Polyethylene, Minimum 1.23 In Height. With 3 High Visibility Reflective Adhesive Tapes, 07Cm Each, With Individual Recesses For Their Protection. It Must Have A Top Hole To Fit An External Warning Light (Night Light) And A Handle On The Top For Easy Transport. Square Base Of At Least 0.6M The Upper Part Must Have At Least 4 Elevations For Water Passage. Orange Color With White Reflective., Cable Gland, Approximately 100Cm Long And 25Cm Wide, Up To 5Cm High, Reasonable Variation Allowed, With 02 Internal Channels With A Capacity Of Approximately 3Cm In Diameter Each, Compatible With Various Cables And Hoses. Product Made With A Resistant Rubber Base And A High-Resistance, Hinged Polyethylene Cover. Non-Slip Surface, With Sloping Sides, Must Allow Access To Cables Without The Need For Disassembly, In Black With Yellow Cover Or Similar., 03/19/2026 - 15:32:01, Spine Modular, Approximately 100Cm Long, 35Cm Wide And 5Cm High, Made Of Material With High Mechanical Resistance And Structural, With A Minimum Load-Bearing Capacity Of Up To 20 Tons Per Axle. Modular Product, Allowing Continuous Assembly Through Fitting Between Modules. It Must Have A Minimum Of 8 Fixing Points Per Module, Compatible With Anchor Screws, Enabling Installation, Removal And Reinstallation. Surface With Uniform Finish, With Impact Absorption Capacity At Low Speeds. In Black And Yellow Or Similar Color, Including Side Finishing Pieces.
|