|
Felt Polishing Wheel Ø150×22 Mm, Thickness 20 Mm For A Bevel Machine, Please Agree In Advance, 1.Diamond Grinding Wheel (Roughing) Ø150×22 Mm, Width 10 Mm, Grit. 80–100 2. Diamond Grinding Wheel (Medium) Ø150×22 Mm, Width 10 Mm, Grit. 150–240 3. Diamond Grinding Wheel (Thin) Ø150×22 Mm, Width 10 Mm, Grit. 400–600 For A Bevel Machine To Be Agreed Upon In Advance, Sanding Knife 20*12*2 Mm Description The Scraping Knife (Scraper) Is Designed For Finishing Edging Material (Pvc) With A Thickness Of 2-3 Mm. Radial Scraping Ensures The Removal Of Kinematic Waves Generated After Milling. Bilateral. Dimensions Length = 20 Mm; Width = 12 Mm; Thickness = 2 Mm; R=2, Product Type Led Strip Profile Length (Cm)200 External Height (Mm)12 External Width (Mm)16 Inner Width (Mm)11.2 Installation Type: Built-In Color Palettegrey / Silver Tape Width (Mm)12, Carbide Circular Saw For Format-Cutting Machine (Set) Main Saw: Diameter: 400 Mm Cut Thickness: 4.4 Mm Bore Diameter: 75 Mm Number Of Teeth: 72 Scoring Saw: Diameter: 160Mm Cutting Thickness: 4.4 / 5.4 Mm Bore Diameter: 45 Mm Number Of Teeth: 24 Dimensions Are Pre-Agreed With The Customer. Specifications And Requirements: The Saw Blades Are Equipped With Carbide Tips Made From A Wear-Resistant Fine-Grained Alloy, Ensuring Long Tool Life Before Re-Sharpening. The Saw Blade Body Is Made Of High-Quality Tool Steel, Which Reduces Vibration During Operation And Ensures Precise And Clean Cuts. The Disk Body Is Produced Using High-Precision Laser Cutting, Which Reduces Residual Stresses In The Material And Increases The Service Life Of The Tool. Carbide Teeth Are Fastened Using Multilayer Solder Based On Silver And Copper, Which Ensures A Strong Connection And Reduces The Risk Of Teeth Chipping During Operation. Marking Of Technical Parameters Is Applied Using Laser Engraving To Preserve Information During Operation. The Geometry And Sharpening Angles Of The Teeth Are Optimized For Processing Wood-Based Panel Materials (Chipboard, Mdf, Chipboard), Which Ensures High Quality Cutting. The Design Of Carbide Teeth Allows For Repeated Sharpening Of The Tool. Saw Blades Are Supplied In Protective Packaging With Information On Recommended Operating Modes Of The Equipment. Purpose: For Cutting Wood-Based Panel Materials (Chipboard, Mdf, Chipboard) On Format-Cutting Machines. Agree In Advance., Straight Cylindrical Leg, Adjustable Height Min. 100; Max. 140 Mm, Chrome, Steel, Diameter 60-61 Mm, Metal Thickness 2 Mm, Size Plastic Feet Of The Thrust Bearing Height 55-58 Mm, Thickness 10-11 Mm, Diameter 63-64 Mm. At The Top There Is Flat Square Metal With A Thickness Of At Least 2 Mm, In The Corners There Are 4 Holes With A Diameter Of 5 Mm, Measuring Tape 3.8 Meters Assist With Hitchhiking, 1St Class Of Accuracy, Tape 25 Mm, Nylon Coating To Be Agreed Upon In Advance, Led Strip 5 Meter With Power Supply Power 15W / Meter Luminous Flux Lm. 1500 Lm/Meter Color Temperature 3000K,4000K,6500K Protection Degree Ip 20 Dimensions Coil: 5 M. Tape Width: 5 Mm Number Of Leds 240 Pcs/Meter Diode Type Smd 2835 Light Transmission Coefficient Ra 95 Service Life 30,000 Hours The Kit Must Include A Power Supply, Agreed Upon In Advance, Type: Carbide Circular Saw Outer Diameter: 300 Mm Cut Thickness: 3.2 Mm Bore Diameter: 30 Mm Number Of Teeth: 96 Tooth Shape: Straight / Trapezoidal (Tfz) Rake Angle: Positive Purpose: The Circular Saw Is Designed For Longitudinal And Transverse Cutting Of Laminated Chipboards (Ldsp), Chipboards (Chipboards), Mdf Boards And Melamine-Coated Panels On Format Cutting Machines Using A Scoring Saw. Description And Design Features: The Saw Blade Is Equipped With Carbide Tips Made From A Wear-Resistant Fine-Grained Alloy, Ensuring Long Service Life And High Durability Of The Cutting Edge. The Body Of The Circular Saw Is Made Of High-Quality Tool Steel, Which Reduces Vibration During Operation And Ensures High Cutting Accuracy And Clean Cutting Of The Material. The Production Of The Housing Is Carried Out Using High-Precision Laser Cutting, Which Reduces Residual Stresses In The Metal And Increases The Service Life Of The Tool. Soldering Of Carbide Teeth Is Performed Using Multilayer Solder Based On Silver And Copper, Which Ensures A Reliable Connection And Reduces The Likelihood Of Teeth Chipping During Operation. Marking Of Technical Parameters Is Applied Using Laser Engraving To Save Information During Operation And Facilitate Re-Ordering. The Geometry And Sharpening Angles Of The Teeth Are Optimized For Processing Laminated Board Materials, Which Ensures High Quality Cuts. The Design Of Carbide Teeth Allows For Repeated Sharpening Of The Tool. The Disk Body May Have Compensation Slots To Reduce Noise And Vibration During Operation., Edge Banding Machine Blade Saw Blade 125X30_3.2/2.2 Z=36 Gs Grooved (4/6.5/48+4/6.5/48 4R+4L) 1253.23036 Disc Diameter, Mm 125 Bore Diameter, Mm 30 Cutting Width 3.2 Disc Thickness 2.2 Number Of Teeth 36 Tooth Shape Variable-Oblique Tooth, Polishing Paste (Cerium Oxide) 1 Kg, Polishing Wheel (Rubber/Resin) Ø150×22 Mm, Width 10 Mm For A Bevel Machine, Please Agree In Advance, A Two-Component Adhesive That Consists Of A Viscous Cyanoacrylate Gel And An Activator Aerosol. Volume 100 Gr. Glue And 400 Ml Of Activator Aerosol, External Hinge 110° With Closer And Clip Bar. Cup Fastening: By Screwing. Soft Closing Mechanism. Drilling Pattern: 35/6 Mm. Clip Bar. At Least 6 Mounting Holes, Hole Diameter 5 Mm. Double Packaging, Each Loop With A Pair Is Packed Well, Weighs At Least 180-190 Grams. Made Of High-Quality Metal. We Accept Strictly According To The Characteristics., Type: Carbide Cutter Purpose: For The Preliminary (Flat) Milling Unit Of An Edge Banding Machine, Intended For Removing Overhangs Of Edge Material When Processing Slab Wood Materials. Specifications Tool Type: Woodworking Milling Cutter Outer Diameter: 56Mm Bore Diameter: 16 Mm Cutting Width: 14 Mm Number Of Knives: 4 Cutting Element Material: Carbide Tipped Type Of Processing: Preliminary (Flat) Milling Of Edge Material Purpose Of Processing: Removing Edge Overhangs After Gluing The Edge Material Processed Materials: Chipboard, Chipboard, Mdf And Similar Wood-Based Panel Materials Product Requirements The Cutter Must Ensure Stable And Precise Processing Of Edge Material. The Cutter Body Is Made Of Tool Steel. The Cutting Elements Have Increased Wear Resistance. The Design Allows Long-Term Operation When Working On Edge Banding Machines., Thickness 0.60Mm Diameter 25 Mm Length 3 Meter The Rod Is Designed For Transverse Placement Of Clothes On Hangers Inside The Closet. Such Devices Are Necessary For The Rational Use Of Space Inside Furniture. Size: D25*0.65*3000 Mm, Metal Furniture Corner 40X20x20, Color: Yellow, Metal Thickness 1.1 Mm, Plastic Thrust Bearing For Screws, 50*17*10 Mm. Material Plastic. Color; Agree. Wall Thickness 2 Mm., Confirmat 6.4*50 Mm. Hexagonal, Galvanized, Steel., Foam-Based Adhesive Tape, Double-Sided, Black, 19 Mm X 300 M To Be Agreed Upon In Advance., 1Mm-19Mm; Pvc Material Is Flexible. Roll 200M. Roll Weight 6.3 Kg. Pvc Edge Gold Color 200 Meters. Color To Be Coordinated Agree In Advance, Yellow Dowel Expansion Dowel 8X72 Mm Type U With A Side (Mark Color). Must Be Together With The Screw. Agree In Advance, Furniture Mortise Lock For Cabinet Doors, Drawer Round, Chrome, 2 Keys, Universal With Latch Bar Included, 40X40 Mm, Accessories For Drills And Screwdrivers - Magnetic Bits With Ph2 Heads. The Fastener Is Attracted To The Bit Using A Ring Magnet, Which Makes It Possible To Operate With One Hand. The Magnetic Holder Ensures Reliable Fixation Of The Fastener, Even With Strong Shaking. The Bits Are Made Of Alloy Steel. Hexagonal Head For A Screwdriver Chuck, With A Ph2 Head On Both Sides. At The End Of The Bit There Is An Aluminum Attachment With A Ring Magnet, The Magnet Has Strong Magnetic Properties And Attracts Self-Tapping Screws And Screws Well. But The Tip Itself Is Made Of Steel. There Is A Spring Installed Inside The Tip. If Necessary, The Magnetic Head Can Be Easily Removed And Installed; It Has A Clear Fixation. Dimensions; Length 65 Mm, Width 10 Mm. We Accept Strictly According To The Characteristics. Agree In Advance., Type: L-Shaped Corner Purpose: For Decorative Finishing, Protection And Closing Of Corners And Joints Of Surfaces During Installation And Finishing Work. Specifications Shape: L-Shape Material: Plastic Or Aluminum Color: White Size: 35 × 45 Mm Surface Type: Smooth Resistance: To Moisture And Household Pollution Application: Interior Finishing And Installation Work Installation: Adhesive Or Mechanical Fastening Method Additional Requirements The Product Must Be Free Of Cracks, Chips And Deformations. The Surface Is Smooth, Without Damage Or Manufacturing Defects. The Color Is Uniform Along The Entire Length Of The Product. Supplied In Protective Packaging To Ensure Safety During Transportation., Blow Gun Nozzle Type Short Rapid Connection Type Air Flow 100 L/Min Pressure Up To 6 Bar With Tank No, Jigsaw Blade For Wood Working Length - 75 Mm. Tooth Pitch - 4 Mm. Processing Material - Wood, Universal, Countersunk Head, Galvanized Steel (Chrome) Self-Tapping Screw For Fastening Various Structures To Wood, Plywood, Chipboard. Furniture. Spline Pz. Dimensions 3.5X16 Mm. Length 16 Mm. Body Thickness 3.5 Mm. Head Diameter 7 Mm. There Are 1000 Pieces In A Pack. Chrome Color. Agree In Advance, • Motor Power - 2000 W • Paint Productivity - 2.5 L/Min • Maximum Operating Pressure - 3200 Psi • Supply Voltage And Frequency - 220 V, 50 Hz • Nozzle (Nozzle) Diameter - 0.017–0.019 Inches, Transparent Surface Structure - Glossy Number Of Sheets In A Pack (Pcs) - 2 Light Transmittance (%) - 100 User Specifications: Sheet Size (M) - 1.23 × 2.45 Sheet Thickness (Mm) - 10 Mm., Pipe Fastening (Socket) D25 Mm, Chrome Thickness 0.60 Mm Diameter 25 Mm Length 3 Meter The Rod Is Designed For Transverse Placement Of Clothes On Hangers Inside The Closet. Such Devices Are Necessary For The Rational Use Of Space Inside Furniture. Size: D25*0.65*3000 Mm, Drill With Countersink, Dimensions 4/6.5 Mm, Length No Less Than 87 Mm. The Shank Is Cylindrical. Drills For Connecting Parts Using “Euroscrews” Or “Confirmat”. Confirmatory Drills With Countersinks And Cylindrical Shanks Are Used For Drilling Blind Holes In Soft And Hard Wood. Technical Features: Extra Strong Steel Body. 2 Precision Z2 Cutting Edges Made Of Sp Tool Steel. 2 Spiral Cutting Edges. The Drill (D=4 Mm) Is Sold Complete With A Drill Holder With A Countersink (6.5 Mm) And A Hex Key., Type: Carbide Scoring Circular Saw Purpose: Intended For Cutting The Coating On Laminated Wood Boards When Cutting On Format Cutting Machines. Used In Conjunction With The Main Saw To Prevent Chipping When Processing Materials. Specifications External Diameter: 120 Mm Working Cutting Width: 3.1–4.3 Mm Case Thickness: 2.2 Mm Bore Diameter: 20 Mm Number Of Teeth: 24 Tooth Type: Conical, Variable Bevel Rake Angle: Positive Purpose Of Processing To Trim The Coating When Cutting: Laminated Chipboards (Ldsp) Particle Boards (Chipboards) Mdf Boards Panels With Decorative Coating Design Features The Saw Blade Is Equipped With Carbide Teeth Made From A Wear-Resistant Fine-Grained Alloy, Ensuring Long Tool Life Before Re-Sharpening. The Saw Blade Body Is Made Of High-Quality Tool Steel, Which Reduces Vibration And Ensures Accurate Cutting And Clean Cutting Of The Material. The Production Of The Case Is Carried Out Using High-Precision Laser Cutting, Which Reduces Internal Metal Stresses And Increases The Service Life Of The Tool. Carbide Teeth Are Fastened Using Multilayer Solder Based On Silver And Copper, Which Ensures The Strength Of The Connection And Reduces The Likelihood Of Teeth Chipping During Operation. Marking Of Technical Parameters Is Applied Using Laser Engraving To Preserve Information During Operation. The Geometry And Sharpening Angles Of The Teeth Are Optimized For Processing Laminated Board Materials. The Design Of The Teeth Allows For Repeated Sharpening Of The Tool. Saw Blades Undergo Dynamic Balancing And Control Of Radial And Axial Runout., Cobalt Metal Drill C/X 10 Mm R6m5k5: • Drill Diameter: 10 Mm • Material: Cobalt Alloy R6m5k5 • Shank Type: Cylindrical, Furniture Guide Telescope 45*1*1*1.2*450 Mm With Closer Telescopic Guide Is An Extension Mechanism Consisting Of 3 Steel Profiles Moving One Inside The Other On High-Strength Balls According To The Bearing Principle. Provides Full Extension And Smooth Closing. The Outer Part Is Fixed To The Furniture Body, The Inner Part Is Attached To The Pull-Out Element. On The Inside There Is A Lever For A Removable Mechanism That Allows You To Separate The Parts Of The Guide. Depending On The Thickness Of The Metal, Telescopic Guides Can Ensure Easy Sliding Even Under High Loads. Consult In Advance, Handle Type Handle Profile Color Black Center Distance 160 (Mm). 250(Mm). Main Material Metal Finish Anodized Shape Rectangular Quantity In Set1 Mounting Type Screw Fastening Mount Included Yes Packaging Type Bag Please Agree In Advance, Net Weight:1.3Kg Length:30Mm Quantity:5000 Pcs. Material: Steel Plating: Nickel Section/Diameter: 1.0X1.25 Mm Type Of Equipment: Finishing Pins, Universal, Countersunk Head, Galvanized Steel (Chrome) Self-Tapping Screw For Fastening Various Structures To Wood, Plywood, Chipboard. Furniture. Spline Pz. Dimensions 3.5X16 Mm. Length 50 Mm. Body Thickness 3.5 Mm. Head Diameter 7 Mm. There Are 1000 Pieces In A Pack. Chrome Color. Agree In Advance., Universal, Countersunk Head, Galvanized Steel (Chrome) Self-Tapping Screw For Fastening Various Structures To Wood, Plywood, Chipboard. Furniture. Spline Pz. Dimensions 3.5X30 Mm. Length 30 Mm. Body Thickness 3.5 Mm. Head Diameter 7 Mm. There Are 500 Pieces In A Pack. Chrome Color. Agree In Advance, Furniture Shelf Holder 5X16 Mm, Metal, Name: Resin Diamond Grinding Wheel. Shape: Single Hypotenuse (Pdx). Size: 150*32*10*8 Mm. Concentration: 75%. Tilt Angle: 15. Base Material: Aluminum. Grinding Material: Synthetic Diamond. Usage: Diamond Grinding Wheel Of High Hardness, Strength, Strong Grinding Ability, Mainly Used For Grinding High And Hard Alloys, Non-Metallic Materials, Cutting Hard And Brittle Carbide, Non-Metallic Minerals. Such As Carbide, Ceramics, Agate, Optical Glass, Semiconductor Materials And Cast Iron, Stone And So On. D = 125 Mm D = 32 Mm H = 10 Mm W = 8 Mm X = 1 Mm., The Adhesive Is Used For Lining The Ends Of Furniture Parts On Automatic Edgebanding Machines With Edgebanding Material Pvc, Melamine, Polyester, Veneer, And Metal. Packaging: 25 Kg/Bag. Agree In Advance Properties: High Temperature Adhesive Eva Base Density 1.29 G/Cm3 Ivory Color Kind Of Hard Small Granules Softening Temperature 100-112 0С Time Spent In Air Is Medium-Short Performance Characteristics: Temperature Of Edge And Supporting Materials 17-20 0С Workpiece Feed Speed 10-30 M/Min Operating Temperature 190-210 0С Temperature Of The Glue Roller 195-220 0C Consumption (Depending On The Type Of Material) 180-280 G/M2
|
