|
Tender For Comprehensive Maintenance And Repair To Certain B/R Works For Zone 1 And Zone 2 At Mil Stn Gandhinagar - Taking Down Shutter Of Any Description Exceeding 1 Square Metre And Not Exceeding 2 Square Metre Each Complete All As Specified And As Directed. Taking Down Chowkhat Or Frame (Without Taking Off Shutter From The Frame) Not Exceeding 1.5 Square Metre Each , Removing From The Site Including Cutting Holes Required For Taking Out Existing Hold Fast Etc. Complete All As Specified And As Directed. Taking Down Chowkhat Or Frame (Without Taking Off Shutter From The Frame) Exceeding 1.5 Square Metre And Not Exceeding 04 Square Metre Each , Removing From The Site Including Cutting Holes Required For Taking Out Existing Hold Fast Etc. Complete All As Specified And As Directed. M&L Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing Complete All As Specified And As Directed. M&L For Framed/Chowkat Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Sheet, Braces Incl Fastner, Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings Running Rails And Guides And Hanging; Also Fastening And Fixing Complete All As Specified And As Directed. S&F Factory Made Solid Panel Pvc Door Shutter 30Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails, M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc `C Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S Frame Wedded/ Sealed To The Stiles, & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And As Directed. S&F Factory Made Solid Pvc Moulded Door Shutter With Particle Board , 28 To 30Mm Thick (Stiles), With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Prelam Pvc Sheet On The Front Face & 2Mm Prelam Pvc Sheet On Back Face Supplying & Fixing In Frame At Site As Per Specification & Drawing Complete All As Specified And As Directed. S&F 35Mm Thick Iind Class Hard Wood Panelled Door Shutter With Lock Rail And Panel Of 9Mm Bwp Commercial Ply Or 12Mm Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rail And Stiles As Per Is: 1003 (Part-I), Kiln Seasoned And Chemically Pressure Treated And Fixed To Chowkats Complete. S&F 35 Mm Thick Iind Class Hard Wood Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc. (Without Sash Bars), Edge Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitred Beds For Securing Glass, Etc.; Sizes Of Members Of Shutters As Specified In Ssr Part I, Section 8. Clause 8.20 (A); Supplied And Fitted To Chowkats Complete All As Specified And As Directed. M&L For 30Mm Thick Flush Shutter Solid Core Construction With Block Board Core And Ply Wood Face Panels, Commercial Type On Both Side Prelam Laminated Sheet And Side Bedding Complete Etc Compete All As Specified And Directed By Engr-In-Charge. S&F Providing And Fixing Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) Work For Three/Two Tracks Shutters/ Frames/Grills For Doors, Windows, Ventilators And Partitions (Fixed Portions), Slinding Windows,Ventilators Including Providing And Fixing Hinges/ Pivots/Rollers And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid For Separately) With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling, C.P. Brass/ Stainless Steel Screws All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. 12 M&L For Preparing Of New Untreated Wooden Surfaces Of Any Description Not Otherwise Described Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint (Of Approved Shade) Over A Coat Of Pink Primer Complete All As Specified And As Directed. 13 M&L Painting To New Or Previously Untreated Steel Surfaces Of Any Description Over 10Cm In Width Or Girth With Two Coats Of Synthetic Enamel Paint Over A Coat Of Zinc Chromic Primer Including Preparation Of Surfaces Complete All As Specified And As Directed. 14 Supply And Fixing Stainless Steel Hinges 100Mm Long Medium Weight To Pressed Steel/Angle Iron Frames By Welding/Screws Complete All As Specified And As Directed. 15 S&F Aluminium Anodised Barrel Tower Bolt 150Mm Size Extruded Section, Isi Marked & Fixed 16 S&F Aluminium Anodised Barrel Tower Bolt 200Mm Size Extruded Section, Isi Marked & Fixed Complete All As Specified And As Directed. 17 S&F Extruded Aluminium Alloy Handles 150Mm Size Fabricated Type Anodised. Isi Marked Complete All As Specified And As Directed. 18 S&F 300Mm Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp ,Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed Complete All As Specified And As Directed.
|
