Bids Are Invited For Acquisition Of School Furniture, Intended For Serving Students In The Municipal Educati ... in Brazil

Work Detail

Youth Dining Room Set - Table With 12 Chairs? Table With A Single Seamless Top Measuring 2150Mm Long By 950Mm Wide, With A Thickness Of 8Mm And A Seamless Edge Measuring 50Mm Made Of High-Impact Virgin Abs Thermoplastic Resin, Free From Mineral Fillers, With The Manufacturers Logo Injected Onto The Surface Of The Top. Top Fixed To The Structure Using Screws. Top To Floor Height Of 640Mm. Table Top Base Formed By Two Square Tubes Measuring 25X25mm Positioned Under The Top, Manufactured Using The Mechanical Forming Process By Bending, Covering The Entire Perimeter Of The Table, Resulting In Two Welding Points And A Horizontal Support Bar Made From 25X25mm Tube, 4 Columns With 2? Inches For The Feet, With Injected Pp (Polypropylene) Plastic Resin Tips. The Entire Metallic Structure Is Manufactured From Carbon Steel Tubes Treated By Sets Of Chemical Baths For The Protection And Longevity Of The Structure And Welded Using The Mig System. Stackable Chair With Seat And Back In Pp Plastic Resin (Polypropylene). The Backrest Is Approximately 405Mm Wide By 300Mm Vertical And The Seat Is Approximately 400Mm Wide By 380Mm Deep, Both Components Mounted On A Tubular Carbon Steel Structure, Produced In 7/8? Forming Seat, Back And Front Legs. Rear Feet In Tube With Diameter Of 22, 22Mm And Connection Bar In Tube 7/8? Conjoining The Rear Feet. Seat Reinforcement In 5/8? Tube. All Metal Structure Electrostatically Painted In Gray Color. Pp (Polypropylene) Plastic Resin Tips. Chair With 380Mm Height From Seat To Floor., Childrens Dining Room Set - Table With 12 Chairs - Table With A Single Seamless Top Measuring 2150Mm In Length By 948Mm In Width, With A Thickness Of 8Mm And A Seamless Edge Measuring 50Mm, Made Of Virgin Abs High Impact Thermoplastic Resin, Free From Mineral Fillers. Manufacturers Logo Injected On The Surface Of The Top. Top Fixed To The Structure Using Screws. Top To Floor Height Of 590Mm. Table Top Base Formed By Two Square Tubes Measuring 25X25mm Positioned Under The Table Top, Covering The Entire Perimeter Of The Table And Resulting In Two Welding Points Joining The Ends And A Horizontal Support Bar Made From 25X25mm Tube, With Injected Pp (Polypropylene) Plastic Resin Tips. Chair - Stackable Model Chair With Seat And Back In Pp Plastic Resin (Polypropylene). The Backrest Is Approximately 340Mm Wide By 280Mm Vertically And The Seat Is Approximately 340Mm Wide By 340Mm Deep, With Backrest And Front Legs. Single Tube Rear Feet With 22.22Mm Diameter And 7/8 Tube Connection Bar? Conjoining The Rear Feet. Seat Reinforcement In 5/8? Tube. All Metal Structure Electrostatically Painted In Gray Color. Pp (Polypropylene) Plastic Resin Tips. Chair With 350Mm Height From Seat To Floor.

Contact Information