Tenders Are Invited For Metalworking – Friedrichshafen Vocational School Center Renovation Of Shed Roofs And ... in Germany

Work Detail

Metalworking – Friedrichshafen Vocational School Center Renovation Of Shed Roofs And Facade Workshop - Metal Construction Work Ii. - Subject Of This Tender The Subject Of This Tender Is Essentially The Production, Delivery And Assembly Of: A) The Skylights As Part Of The New Shed Roofs To Be Created, B) The Room-Side Skylights As Partitions In The Longitudinal Direction Of The Shed C) Gable Walls Across The Shed In A Light Construction - Notes On Processing In Sections The Shed Roof Renovation Is Divided Into A Total Of 4 Sections Structured, With The First Two Sections Already Being Carried Out In 2025. The Shed Roofs Are Divided Lengthwise Into Two Sections. The Transition From New Shed Roof Areas To Old Shed Roof Areas With Temporary Sealing Of The Different Geometries Takes Place Via A Cross Corridor. The Internal Protective Measures Will Be Implemented In The Next Section After Section 1 Is Completed. They Overlap The Construction Sections Around The Cross Corridor. The Replacement Of The Shed Roofs For Each Construction Phase Is Carried Out One After The Other From Shed 7 To Shed 1. The Sequence Of Work For Each Section Is Described Separately In The Preliminary Remarks Under The Title Shed Roof Renovation. - General Information Shed Roof Renovation A Total Of 14 Identical Shed Roof Constructions Are Planned For Renovation Over The Existing Workshops With A:  Total Width Of Approx. 2.70M  A Height Of Approx. 1.50M  Individual Length Of Approx Light Strips In The Shed Roofs 1-7 On The North Side. The Shed Roof 1 On The Long Side Of The Building Differs Slightly From The Standard Sheds 2-7 At The Base, As An Internal Gutter Forms The Transition To The Existing Vhf Facade. The Total Width Of Sheds 1 And 14 Is Approx. 3.10M. However, The Light Strip Is Installed In Almost The Same Construction. Moisture-Sensitive Floor Coverings (Parquet) And Moisture-Sensitive Facilities Are Present In Most Areas Of The Building. All Protective Measures And The Weekday Work Sequence Must Be Planned With The Aim Of Preventing Any Water From Entering The Building. The Rooms Will Continue To Be Used During The Renovation Of The Shed Roofs After The Room-Side Fall-Through Protection With Protective Covers Has Been Installed. The Work Takes Place Under The Protective Roofs In A Confined Work Space (See Image Documentation). Work In A Confined Work Space Must Be Taken Into Account. - Sectional Processing Of Shed Roof Renovation The Dismantling Or Replacement Of The Existing Shed Roof Construction Is Carried Out In Two Construction Phases In The Longitudinal Direction Of The Sheds. The Cross Corridor In The Building Forms The Separation Or Transition To The Next Processing Section. The Contractor Delivers The Light Strips In Each Shed In Two Construction Phases. For The Replacement Of A Construction Phase Including Dismantling And Renewing The Construction With Installation Of A Rooflight, 2 Weeks Are Planned For Execution: 1St Week: Dismantling Of The Existing Shed And Masonry Gable, Installation Of New Gable Partitions Made Of Stb For

Contact Information