|
Bids Are Invited For Renovation Civil Work Of Lab No. 12,14,15,22,23,117,118,120, 213, 218 & Ups Room Of Cif, Icar- Nipb At Lbs Building, Under Sdiii/Cd-Iv New Delhi. -1 Providing, Installing And Placing Factory Made Floor Mounted Island Laboratory Table With Storage Cabinets Consisting Of Cabinet Frame, Cover Panels, Metal Shutters & Drawers, Support Brackets, Shelves, Slides And Handles Having Completely Designed Modular Understructure Stand. Under Structure Stand Shall Be Made Of 30X30 Mm Square Tube Of 1.2 Mm Thick Crca Sheet Duly Powder Coated. The Complete Frame Of Cabinet Shall Be Combination Of 1.2 Mm Thick Horizontal Or Stiffeners And 0.8 Mm Thick Vertical Panel Of Crca Steel As Per Is 10748 / Is5986- Fe 410 Sheet Pretreated (Degreased, Zinc Phosphating) And Epoxy Powder Coating 40-60 Microns For Better Corrosion Resistance. Panels Shall Be 6 Bend Panels And Shall Be Made From Mild Steel Sheets Not Less Than 0.8Mm In Thickness With Lipped Flanges. Metal Shutters And Drawers Should Be Made Of 0.8Mm Thick. Crca Sheet With Profile Insert To Provide Rigidity To The Doors. Worktop Of Laboratory Table Shall Be Made Of 18Mm High Quality Granite In Jet Black Colour Including Cutting, Edge Molding & Polishing Fixed Over 8Mm Thick Marine Ply. Granite / Reagent Support Brackets Shall Be Provided To Serve The Purpose Of Supporting The Granite And Carrying The Service Lines. Support Brackets To Be Provided In 2 Mm Crca Ms Sheet. Unit Shelves In 0.8Mm Thick Crca To Have A Load Carrying Capacity Of 40 Kg. High Precision Double Extension Ball Slides To Be Provided For The Drawers. Hinges Should Be Spring Loaded Of Hafelle/Hettich/Ebco Make. Each Unit Should Be Provided With A Locking Facility. Powder Coating Should Be At Least 40-60 Microns With Epoxy Powder Coated. There Should Be Provision For Electrical Points And Wire Conduit In The Island Table As Per Requirement At Site 1.1 All The Above Items Should Be As Per Approved Sample And Specifications & Direction Of Engineer-In-Charge. A One Side Linear Module With Storage & Leg Space Having Overall Size 1500Mm (L) X 900Mm (D) X 900Mm (H) 9.00 Nos. B One Side Linear Module With Storage & Leg Space Having Overall Size 1500Mm (L) X 900Mm (D) X 1650Mm (H) With Regent Rack 2 Providing, Installing And Placing Factory Made Floor Mounted Island Laboratory Table With Storage Cabinets Consisting Of Cabinet Frame, Cover Panels, Metal Shutters & Drawers, Support Brackets, Shelves, Slides And Handles Having Completely Designed Modular Understructure Stand. Under Structure Stand Shall Be Made Of 30X30 Mm Square Tube Of 1.2 Mm Thick Crca Sheet Duly Powder Coated. The Complete Frame Of Cabinet Shall Be Combination Of 1.2 Mm Thick Horizontal Or Stiffeners And 0.8 Mm Thick Vertical Panel Of Crca Steel As Per Is 10748 / Is5986-Fe 410 Sheet Pretreated (Degreased, Zinc Phosphating) And Epoxy Powder Coating 40-60 Microns For Better Corrosion Resistance. Panels Shall Be 6 Bend Panels And Shall Be Made From Mild Steel Sheets Not Less Than 0.8Mm In Thickness With Lipped Flanges. Metal Shutters And Drawers Should Be Made Of 0.8Mm Thick. Crca Sheet With Profile Insert To Provide Rigidity To The Doors. Worktop Of Laboratory Table Shall Be Made Of 18Mm High Quality Granite In Jet Black Colour Including Cutting, Edge Molding & Polishing Fixed Over 8Mm Thick Marine Ply. Granite / Reagent Support Brackets Shall Be Provided To Serve The Purpose Of Supporting The Granite And Carrying The Service Lines. Support Brackets To Be Provided In 2 Mm Crca Ms Sheet. Unit Shelves In 0.8Mm Thick Crca To Have A Load Carrying Capacity Of 40 Kg. High Precision Double Extension Ball Slides To Be Provided For The Drawers. Hinges Should Be Spring Loaded Of Hafelle/Hettich/Ebco Make. 2.1 Each Unit Should Be Provided With A Locking Facility. Powder Coating Should Be At Least 40-60 Microns With Epoxy Powder Coated. Regent Rack Is Made Of 0.8 Mm Thick Crca Sheet And Is On Above The Lab Table With Provision Of Electrical Cable Duct For Entire Length Where Ever Required. There Should Be Provision For Electrical Points And Wire Conduit In The Reagent Shelf As Per Requirement At Site. All The Above Items Should Be As Per Approved Sample And Specifications & Direction Of Engineer-In-Charge. A Back To Back Linear Module With Storage & Leg Space Having Overall Size 1500Mm (L) X 1500Mm (D) X 1650Mm (H) With Reagent Rack 11.00 Nos. 3 Providing, Installing And Placing Factory Made Floor Mounted Sink Unit With S.S. Sink And C.P. Three Way Water Faucet Consisting Of Cabinet Frame, Cover Panels, Metal Shutters & Drawers, Support Brackets, Shelves, Slides And Handles Having Completely Designed Modular Understructure Stand. Under Structure Stand Shall Be Made Of 30X30 Mm Square Tube Of 1.2 Mm Thick Crca Sheet Duly Powder Coated. The Complete Frame Of Cabinet Shall Be Combination Of 1.2 Mm Thick Horizontal Or Stiffeners And 0.8 Mm Thick Vertical Panel Of Crca Steel As Per Is 10748 / Is5986-Fe 410 Sheet Pretreated (Degreased, Zinc Phosphating) And Epoxy Powder Coating 40-60 Microns For Better Corrosion Resistance. Panels Shall Be 6 Bend Panels And Shall Be Made From Mild Steel Sheets Not Less Than 0.8Mm In Thickness With Lipped Flanges. Metal Shutters Should Be Made Of 0.8Mm Thick. Crca Sheet With Profile Insert To Provide Rigidity To The Doors. Worktop Of Sink Unit Shall Be Made Of 18Mm High Quality Granite In Jet Black Colour Including Cutting, Edge Molding & Polishing Fixed Over 8Mm Thick Marine Ply. Granite Support Brackets Shall Be Provided To Serve The Purpose Of Supporting The Granite And Carrying The Service Lines. Support Brackets To Be Provided In 2 Mm Crca Ms Sheet. Unit Shelves In 0.8Mm Thick Crca To Have A Load Carrying Capacity Of 40 Kg. High Precision Double Extension Ball Slides To Be Provided For The Drawers. Hinges Should Be Spring Loaded Of Hafelle/Hettich/Ebco Make. 3.1 Each Unit Should Be Provided With A Locking Facility. Powder Coating Should Be At Least 40-60 Microns With Epoxy Powder Coated. Sink To Made Up Up Of Stainless Steel 202 Grade-1 Of Size - 560 X 460 X 200 Fitted On Sink Unit. The Sink Unit Has Also Provision Of Three-Way C. P. Faucet For Water Outlet. All The Above Items Should Be As Per Approved Sample And Specifications & Direction Of Engineer-In-Charge. A Sink Unit With S.S. Sink And C.P. Three Way Water Faucet Of Size 600Mm (L) X 600Mm (D)X 900 Mm (H) Total Quantity : 118
|
