Tenders Are Invited For Industrial Machinery – Delivery Of A Municipal Waste Shredder For The Needs Of Lpgk ... in Poland

Work Detail

Industrial Machinery – Delivery Of A Municipal Waste Shredder For The Needs Of Lpgk Sp. Z O. O.. Characteristics Of The Machine Constituting The Subject Of The Order. 1) Basic Technical Parameters: A) Permissible Total Weight: Up To 47,000 Kg, B) The Device Cannot Be A Prototype. Brand New Machine (Year Of Production At The Latest 2025). The Ordering Party Allows For The Delivery Of A Test Machine (Demo) With A Mileage Of No More Than 750 Mth, Manufactured No Later Than 2025, With A Full Manufacturers Warranty, Which Will Start On The Day The Device Is Received By The Ordering Party. C) A Machine Designed To Shred Waste: Large-Size Waste, Municipal Waste, Clothing-Textile Waste And Bio Waste. D) The Machine Must Be Adapted To Continuous Operation, In Open Space For 80 Hours A Week, In Weather Conditions Prevailing In The Vicinity Of The City Of Legnica. E) The Machine Is Equipped With A Remote Control. F) Capacity Of The Charging Container: Min. 5 M3. G)Descriptions On The Device And Display Menus In Polish Or Pictograms. Drive System: A) Device Equipped With A Diesel Engine With A Power Of Min. 450 Kw Meeting The Eu Stage 5 Exhaust Emission Standard. B) Crawler Drive. C) Fuel Tank Capacity: Min. 700 L. D) Drive Of The Shredding Shafts Via A Hydrostatic Or Mechanical Transmission. In The Case Of A Hydrostatic Drive, The Shaft Should Be Driven From Both Sides, While In The Case Of A Mechanical Drive, The Shaft Can Be Driven From One Side. Shaft Drive Via Belt Transmission Is Not Allowed. The Shaft Drive System Is To Ensure Automatic Reversal When Working Under Load (With A Full Working Chamber). Moreover, It Is Required To Ensure That The Machine Can Be Started (Starting The Shredding Function) When The Working Chamber Is Completely Full. For Safety Reasons, It Is Required That The Drive Should Be Able To Start The Shaft (Starting The Shredding Function) Independently Of The Drive Motor, And Putting The Shaft Into Motion Should Be Preceded By An Acoustic Signal. E) Hydrostatic Drive Of Other Machine Units (Conveyors, Self-Propelled System, Etc.). F) The Machine Is Equipped With A Fuel-Saving System That Reduces The Speed Of The Drive Engine And The Working System To A Minimum When The Grinding Chamber Is Emptied Of Material And Automatically Increases The Engine Speed After Loading The Material. 3) Conveyors Discharging The Crushed Fraction: A) Shredder Equipped With A Lower And Rear Conveyor Discharging The Crushed Fraction, B) Lower Conveyor: - Placed Under The Shredding Shaft, - Possibility Of Turning On The Belt Reverser During Operation Or In Service Mode, - Belt Width Min. 1400Mm. C) Rear Conveyor: - Hydraulically Folded And Unfolded. Adjustable Angle Of Inclination In The Range From 10⁰ To 30⁰, - Smooth Adjustment Of The Belt Speed, - Belt Width Min. 1400 Mm, - Material Ejection Height Min. 4500Mm. D) Conveyor Belts Equipped With Drivers. E) The Machine Is Equipped With A Ferrous Metal Separator, Above The Belt, With Hydraulically Adjustable Height, With A Working Width Of Min. 1000 Mm, After

Contact Information